init

esp32-c3.ino

@@ -4,6 +4,7 @@
 #include <BLE2902.h>
 #include "MPU6050.h"
 #include "Wire.h"
+#include <WiFi.h>
 
 #define SERVICE_UUID "9b9f77c6-7e68-4109-b987-b096233d9525"
 #define CHARACTERISTIC_UUID "1ab2c9f4-19c0-48dd-8932-ed72558ec593"
@@ -29,27 +30,45 @@ class MyServerCallbacks : public BLEServerCallbacks {
   }
 };
 
+void setup_wifi() {
+  WiFi.mode(WIFI_STA);
+  WiFi.begin("Connecto Patronum", "MZ2PUD36D8N23PC2");
+  Serial.print("Connecting to WiFi ..");
+  while (WiFi.status() != WL_CONNECTED) {
+    Serial.print('.');
+    delay(1000);
+  }
+  Serial.println(WiFi.localIP());
+}
+
 void setup_ble() {
-  BLEDevice::init("ESP32");
+  BLEDevice::init("YourESP32");
-  BLEServer *pServer = BLEDevice::createServer();
+  pServer = BLEDevice::createServer();
-  BLEService *pService = pServer->createService(SERVICE_UUID);
+  pServer->setCallbacks(new MyServerCallbacks());
-  BLECharacteristic *pCharacteristic = pService->createCharacteristic(
+  BLEService *pService = pServer->createService(BLEUUID(SERVICE_UUID));
-    CHARACTERISTIC_UUID,
+
-    BLECharacteristic::PROPERTY_READ | BLECharacteristic::PROPERTY_NOTIFY);
+  Serial.println("Created service");
+
+  pCharacteristic = pService->createCharacteristic(
+    BLEUUID(CHARACTERISTIC_UUID),
+    BLECharacteristic::PROPERTY_NOTIFY);
+
+  pCharacteristic->addDescriptor(new BLE2902());
+
+  Serial.println("Created characteristic");
 
   pService->start();
-  // BLEAdvertising *pAdvertising = pServer->getAdvertising();  // this still is working for backward compatibility
+  Serial.println("Started service");
+
   BLEAdvertising *pAdvertising = BLEDevice::getAdvertising();
-  pAdvertising->addServiceUUID(SERVICE_UUID);
+  pAdvertising->addServiceUUID(BLEUUID(SERVICE_UUID));
-  pAdvertising->setScanResponse(true);
+  pAdvertising->start();
-  pAdvertising->setMinPreferred(0x06);  // functions that help with iPhone connections issue
+  Serial.println("Waiting for a client connection to notify...");
-  pAdvertising->setMinPreferred(0x12);
 
   uint8_t gyroData[] = { 1, 2, 3, 4, 5, 6 };
   pCharacteristic->setValue(gyroData, sizeof(gyroData));
   pCharacteristic->notify();
-  BLEDevice::startAdvertising();
+  Serial.println("Initial notification sent");
-  Serial.println("Characteristic defined! Now you can read it in your phone!");
 }
 
 void setup() {
@@ -69,6 +88,33 @@ void setup() {
   Serial.println(accelgyro.testConnection() ? "MPU6050 connection successful" : "MPU6050 connection failed");
 
   // use the code below to change accel/gyro offset values
+  BLEDevice::init("YourESP32");
+  pServer = BLEDevice::createServer();
+  pServer->setCallbacks(new MyServerCallbacks());
+  BLEService *pService = pServer->createService(BLEUUID(SERVICE_UUID));
+
+  Serial.println("Created service");
+
+  pCharacteristic = pService->createCharacteristic(
+    BLEUUID(CHARACTERISTIC_UUID),
+    BLECharacteristic::PROPERTY_NOTIFY);
+
+  pCharacteristic->addDescriptor(new BLE2902());
+
+  Serial.println("Created characteristic");
+
+  pService->start();
+  Serial.println("Started service");
+
+  BLEAdvertising *pAdvertising = BLEDevice::getAdvertising();
+  pAdvertising->addServiceUUID(BLEUUID(SERVICE_UUID));
+  pAdvertising->start();
+  Serial.println("Waiting for a client connection to notify...");
+
+  uint8_t gyroData[] = { 1, 2, 3, 4, 5, 6 };
+  pCharacteristic->setValue(gyroData, sizeof(gyroData));
+  pCharacteristic->notify();
+  Serial.println("Initial notification sent");
   Serial.println("Updating internal sensor offsets...");
   // -76	-2359	1688	0	0	0
   Serial.print(accelgyro.getXAccelOffset());
@@ -105,27 +151,31 @@ void setup() {
   setup_ble();
 }
 
+uint8_t idx = 0;
+
 void loop() {
+  idx++;
+
   // read raw accel/gyro measurements from device
   accelgyro.getMotion6(&ax, &ay, &az, &gx, &gy, &gz);
 
-  // these methods (and a few others) are also available
-  //accelgyro.getAcceleration(&ax, &ay, &az);
-  //accelgyro.getRotation(&gx, &gy, &gz);
 
-  // display tab-separated accel/gyro x/y/z values
+  if (idx % 20 == 0) {
-  Serial.print("a/g:\t");
+
-  Serial.print(ax);
+    // display tab-separated accel/gyro x/y/z values
-  Serial.print("\t");
+    Serial.print("a/g:\t");
-  Serial.print(ay);
+    Serial.print(ax);
-  Serial.print("\t");
+    Serial.print("\t");
-  Serial.print(az);
+    Serial.print(ay);
-  Serial.print("\t");
+    Serial.print("\t");
-  Serial.print(gx);
+    Serial.print(az);
-  Serial.print("\t");
+    Serial.print("\t");
-  Serial.print(gy);
+    Serial.print(gx);
-  Serial.print("\t");
+    Serial.print("\t");
-  Serial.println(gz);
+    Serial.print(gy);
+    Serial.print("\t");
+    Serial.println(gz);
+  }
 
   if (deviceConnected) {
 
@@ -154,5 +204,5 @@ void loop() {
   }
 
 
-  delay(50);
+  delay(100);
 }

mpu6050/mpu6050.ino

@@ -0,0 +1,69 @@
+// I2Cdev and MPU6050 must be installed as libraries, or else the .cpp/.h files
+// for both classes must be in the include path of your project
+#include "I2Cdev.h"
+#include "MPU6050.h"
+#include "Wire.h"
+
+MPU6050 accelgyro;
+
+int16_t ax, ay, az;
+int16_t gx, gy, gz;
+
+void setup() {
+    Wire.begin();
+
+    // initialize serial communication
+    // (38400 chosen because it works as well at 8MHz as it does at 16MHz, but
+    // it's really up to you depending on your project)
+    Serial.begin(38400);
+
+    // initialize device
+    Serial.println("Initializing I2C devices...");
+    accelgyro.initialize();
+
+    // verify connection
+    Serial.println("Testing device connections...");
+    Serial.println(accelgyro.testConnection() ? "MPU6050 connection successful" : "MPU6050 connection failed");
+
+    // use the code below to change accel/gyro offset values
+    /*
+    Serial.println("Updating internal sensor offsets...");
+    // -76	-2359	1688	0	0	0
+    Serial.print(accelgyro.getXAccelOffset()); Serial.print("\t"); // -76
+    Serial.print(accelgyro.getYAccelOffset()); Serial.print("\t"); // -2359
+    Serial.print(accelgyro.getZAccelOffset()); Serial.print("\t"); // 1688
+    Serial.print(accelgyro.getXGyroOffset()); Serial.print("\t"); // 0
+    Serial.print(accelgyro.getYGyroOffset()); Serial.print("\t"); // 0
+    Serial.print(accelgyro.getZGyroOffset()); Serial.print("\t"); // 0
+    Serial.print("\n");
+    accelgyro.setXGyroOffset(220);
+    accelgyro.setYGyroOffset(76);
+    accelgyro.setZGyroOffset(-85);
+    Serial.print(accelgyro.getXAccelOffset()); Serial.print("\t"); // -76
+    Serial.print(accelgyro.getYAccelOffset()); Serial.print("\t"); // -2359
+    Serial.print(accelgyro.getZAccelOffset()); Serial.print("\t"); // 1688
+    Serial.print(accelgyro.getXGyroOffset()); Serial.print("\t"); // 0
+    Serial.print(accelgyro.getYGyroOffset()); Serial.print("\t"); // 0
+    Serial.print(accelgyro.getZGyroOffset()); Serial.print("\t"); // 0
+    Serial.print("\n");
+    */
+
+}
+
+void loop() {
+    // read raw accel/gyro measurements from device
+    accelgyro.getMotion6(&ax, &ay, &az, &gx, &gy, &gz);
+
+    // these methods (and a few others) are also available
+    //accelgyro.getAcceleration(&ax, &ay, &az);
+    //accelgyro.getRotation(&gx, &gy, &gz);
+    // display tab-separated accel/gyro x/y/z values
+    Serial.print("a/g:\t");
+    Serial.print(ax); Serial.print("\t");
+    Serial.print(ay); Serial.print("\t");
+    Serial.print(az); Serial.print("\t");
+    Serial.print(gx); Serial.print("\t");
+    Serial.print(gy); Serial.print("\t");
+    Serial.println(gz);
+}
+

mpu6050/sketch.yaml

@@ -0,0 +1,2 @@
+default_port: /dev/ttyACM0
+default_fqbn: esp32:esp32:XIAO_ESP32C3

test/sketch.yaml

@@ -0,0 +1,2 @@
+default_port: /dev/ttyACM0
+default_fqbn: esp32:esp32:esp32s2

test/test.ino

@@ -0,0 +1,62 @@
+/*********
+  Rui Santos
+  Complete instructions at https://RandomNerdTutorials.com/esp32-ble-server-client/
+  Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files.
+  The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+*********/
+
+#include "BLEDevice.h"
+#include <Wire.h>
+
+//BLE Server name (the other ESP32 name running the server sketch)
+#define bleServerName "YourESP32"
+
+/* UUID's of the service, characteristic that we want to read*/
+// BLE Service
+static BLEUUID bmeServiceUUID("91bad492-b950-4226-aa2b-4ede9fa42f59");
+
+//Temperature Celsius Characteristic
+static BLEUUID temperatureCharacteristicUUID("cba1d466-344c-4be3-ab3f-189f80dd7518");
+
+//Flags stating if should begin connecting and if the connection is up
+static boolean doConnect = false;
+static boolean connected = false;
+
+//Address of the peripheral device. Address will be found during scanning...
+static BLEAddress* pServerAddress;
+
+//Characteristicd that we want to read
+static BLERemoteCharacteristic* temperatureCharacteristic;
+
+//Activate notify
+const uint8_t notificationOn[] = { 0x1, 0x0 };
+const uint8_t notificationOff[] = { 0x0, 0x0 };
+
+//Variables to store temperature and humidity
+char* temperatureChar;
+
+//Flags to check whether new temperature and humidity readings are available
+boolean newTemperature = false;
+boolean newHumidity = false;
+
+//Connect to the BLE Server that has the name, Service, and Characteristics
+bool connectToServer(BLEAddress pAddress) {
+  BLEClient* pClient = BLEDevice::createClient();
+
+  // If the flag "doConnect" is true then we have scanned for and found the desired
+  // BLE Server with which we wish to connect.  Now we connect to it.  Once we are
+  // connected we set the connected flag to be true.
+  if (doConnect == true) {
+    if (connectToServer(*pServerAddress)) {
+      Serial.println("We are now connected to the BLE Server.");
+      //Activate the Notify property of each Characteristic
+      temperatureCharacteristic->getDescriptor(BLEUUID((uint16_t)0x2902))->writeValue((uint8_t*)notificationOn, 2, true);
+      humidityCharacteristic->getDescriptor(BLEUUID((uint16_t)0x2902))->writeValue((uint8_t*)notificationOn, 2, true);
+      connected = true;
+    } else {
+      Serial.println("We have failed to connect to the server; Restart your device to scan for nearby BLE server again.");
+    }
+    doConnect = false;
+  }
+  delay(1000);  // Delay a second between loops.
+}