feat: remove logseq stuff

This commit is contained in:
max_richter 2022-04-07 15:33:00 +02:00
parent 233512cb11
commit 55a554161e
5 changed files with 0 additions and 226 deletions

View File

@ -1,76 +0,0 @@
# Ohms Law
Solve for voltage:
$\displaystyle V = \frac{I}{R}$
*Solve for resistance:*
$R = \frac{V}{I}$
_Solve for current_
$$
\begin{flalign}
I & = \frac{V}{R} &
\end{flalign}
$$
# Resistors in Series
$R = R1 + R2 + R3 ...$
# Resistors in Parallel
$$
\begin{flalign}
&\frac{1}{R} = \frac{1}{R1} + \frac{1}{R2} + \frac{1}{R3} ... &\\
\\
&\textit{For two resistors in parallel:} &\\
\\
&R = \frac{R1 * R2}{R1 + R2} &\\\
\end{flalign}
$$
***Tip:***
If resistors of the same value are in parallel the total resistance is a single resistor divided by the amount if resistors.
## Thevenins Theorem
States that it is possible to simplify any linear circuit, no matter how complex, to an equivalent circuit with just a single voltage source and series resistance connected to a load.
# Kirchhoff's Law
## Conservation of Charge (First Law)
All current entering a node must also leave that node
$$
\begin{flalign}
\sum{I_{IN}} = \sum{I_{OUT}}&&
\end{flalign}
$$
**Example:**
![](./assets/kirchhoffs-law-01.svg)
For this circuit kirchhoffs law states that:
$\displaystyle i1 = i2 + i3 + i4$
## Conservation of Energy (Second Law)
All the potential differences around the loop must sum to zero.
$\displaystyle \sum{V} = 0$
## Capacitors in Series
$\displaystyle \frac{1}{C_{t}} = \frac{1}{C_{1}}+\frac{1}{C_{2}}+\frac{1}{C_{3}} ...$
### Impedance in a Circuit
$$
\begin{flalign}
&Z = \sqrt{R^2 + X^2} &\\\
\\
&X = X_{L} - X_{C} \\
\end{flalign}
$$

View File

@ -1,43 +0,0 @@
# Glossary
## Impedance (Z)
In [electrical engineering](https://en.wikipedia.org/wiki/Electrical_engineering "Electrical engineering"), **impedance** is the opposition to [alternating current](https://en.wikipedia.org/wiki/Alternating_current "Alternating current") presented by the combined effect of [resistance](https://en.wikipedia.org/wiki/Electrical_resistance "Electrical resistance") and [reactance](https://en.wikipedia.org/wiki/Electrical_reactance "Electrical reactance") in a [circuit](https://en.wikipedia.org/wiki/Electrical_circuit "Electrical circuit").
[[formulas#Impedance in a Circuit]]
## Voltage (V)
**Voltage**, **electric potential difference**, **electric pressure** or **electric tension** is the difference in [electric potential](https://en.wikipedia.org/wiki/Electric_potential "Electric potential") between two points.
## Resistance (R)
The **electrical resistance** of an object is a measure of its opposition to the flow of [electric current](https://en.wikipedia.org/wiki/Electric_current "Electric current").
## Capacitance (C)
**Capacitance** is the ability of a component or circuit to collect and store energy in the form of an electrical charge.
## Inductance (L)
**Inductance** is the tendency of an [electrical conductor](https://en.wikipedia.org/wiki/Electrical_conductor "Electrical conductor") to oppose a change in the [electric current](https://en.wikipedia.org/wiki/Electric_current "Electric current") flowing through it.
## Current (I)
How many electrons flow through a circuit in a second
## Polarity
Means if a component is symmetric or not
Polarised means that a component is not symmetric
## LED
Anode - The shorter Leg
Cathode - The longer Leg
## Diode
## Anode
The positive end of a diode
## Cathode
The negative end of a diode
## Conventional Current Flow
When electricity was discovered people thought the electrons flow from the positive terminal to the negative, in actuality they flow in the opposite direction, but it is still possible to calculate the flow with the old way.
## Reactive Components
A component is a **reactive component** when it resists to changes in current or voltage.

View File

@ -1,75 +0,0 @@
## Farad
Measures capacitance, the ability of a body to store an electrical charge.
1 Farad = the ability to store 1 couloumb
Term | Symbol | Weight
-----------|----|------
Picofarad | pW | $10^{-12}$
Nanofarad | nF | $10^{-9}$
Microfarad | $\micro$F | $10^{-6}$
Milifarad | mF | $10^{-3}$
Farad | F | $10^0$
Kilofarad | kF | $10^{3}$
## Couloumb
1 coulomb is the electric charge transported within one second through the cross-section of a conductor in which an electric current of the strength of 1 ampere flows.
## Henry
Measures electrical Inductance
$\displaystyle V(t)=L{\frac {dI}{dt}}$
## Volts
Measures electric potential
## Amperes
Measures electric current
## Ohms
Measures resistance
Term | Symbol | Weight
-----------|----|------
Nanoohm | n$\ohm$ | 10-9
Microohm | $\micro \ohm$ | $10^{-6}$
Milliohm | m$\ohm$ | $10^{-3}$
Ohm | $\ohm$ | $10^{0}$
Kiloohm | k$\ohm$ | $10^{3}$
Megaohm | M$\ohm$ | $10^{6}$
Gigaohm | G$\ohm$ | $10^{9}$
## Hertz
Measures frequency
Term | Symbol | Weight
----------|------- | -----
Hertz | Hz | $10^0$
Kilohertz | kHz | $10^{3}$
Megahertz | mHz | $10^6$
## Watt
Measures Power
$Power = V * I = \frac{V^{2}}{R} = I^{2}R$
Joules per Second
Term | Symbol | Weight
-----------|----|------
Nanowatt | nW | $10^{-9}$
Microwatt | $\micro$W | $10^{-6}$
Milliwatt | mW | $10^{-3}$
Watt | W | $10^{0}$
Kilowatt | kW | $10^{3}$
Megawatt | MW | $10^{6}$
Gigawatt | GW | $10^{9}$
**Examples:**
Device | Power
-------|----------
Arduino| 167mW
Laptop | 1.5W
House | 2.2kW

View File

@ -1,31 +0,0 @@
# Roadblocks
## ~~ Nested tmux sessions ~~
Adding this:
```config
RequestTTY true
RemoteCommand tmux new -A -s ssh
```
to the ssh config if the specific hosts will automatically start tmux when connected
If i ssh into a remote machine with tmux started as well I have some problems:
- ~~ Duplicate tmux bar ~~
- ~~ Shortcuts don't work in remote ~~
- This works by hitting the prefix key twice, e.g. ctrl-a-a
## ~~ Debian Gnome sometimes comma key doesn't work ~~
Has not happened in a while
## ~~ Neovim shortcut to comment out ~~
Fixed this by installing the NerdCommenter Plugin
## ~~ Neovim Auto fix problems shortcut + hover window ~~
## ~~ Better git merging in Neovim, like in VScode ~~
## ~~ Copying between neovim, tmux and ssh sessions does not work ~~
## Learn how to use splits and buffers in neovim
## Fix the dictionary for neovim ltex-ls

View File

@ -1 +0,0 @@
{}