feat: start diode chapter

This commit is contained in:
max_richter 2022-03-20 23:15:38 +01:00
parent fd3141bd70
commit 1eb73d6681
10 changed files with 36 additions and 1 deletions

Binary file not shown.

After

Width:  |  Height:  |  Size: 219 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 11 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 40 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 51 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 219 KiB

Binary file not shown.

View File

@ -33,6 +33,9 @@ $$
***Tip:*** ***Tip:***
If resistors of the same value are in parallel the total resistance is a single resistor divided by the amount if resistors. If resistors of the same value are in parallel the total resistance is a single resistor divided by the amount if resistors.
## Thevenins Theorem
States that it is possible to simplify any linear circuit, no matter how complex, to an equivalent circuit with just a single voltage source and series resistance connected to a load.
# Kirchhoff's Law # Kirchhoff's Law
## Conservation of Charge (First Law) ## Conservation of Charge (First Law)
@ -67,6 +70,7 @@ $\displaystyle \frac{1}{C_{t}} = \frac{1}{C_{1}}+\frac{1}{C_{2}}+\frac{1}{C_{3}}
$$ $$
\begin{flalign} \begin{flalign}
&Z = \sqrt{R^2 + X^2} &\\\ &Z = \sqrt{R^2 + X^2} &\\\
\\
&X = X_{L} - X_{C} \\ &X = X_{L} - X_{C} \\
\end{flalign} \end{flalign}
$$ $$

View File

@ -52,7 +52,7 @@ $$
The Problem is, we can't just simply add up R1 and Xc, because Xc is shifted by 90°. We need to add them up as Vectors: The Problem is, we can't just simply add up R1 and Xc, because Xc is shifted by 90°. We need to add them up as Vectors:
$$ $$
Re = \sqrt{R1^2+Xx^2} R_{e} = \sqrt{R1^2+X_{c}^2}
$$ $$
Lets fill in the numbers from the circuit above and test it out: Lets fill in the numbers from the circuit above and test it out:

View File

@ -0,0 +1,28 @@
# Diode
![[diode.png]]
A perfect diode would only allow current to pass through in one directions, in the real world that is not always the case. Diodes have around three regions in which they operate.
![[diode-regions.png|400]]
Each diode needs a certain amount of voltage across its terminals to transmit any current, this voltage is called the forward voltage $V_{F}$. When the Voltage over the diode is below a certain level (Breakdown Voltage, $V_{BR}$) the diode will allow current to pass from the cathode to the anode.
## Types of Diodes
There are a lot of different types of diodes.
![[diode-symbols.png]]
#### Small Signal Diodes
Silicon/Germanium Diodes
![[diode-regions-germanium.png]]
#### Power Diode
These handle higher voltage and higher current than the small signal diodes. These diodes normally dont handle frequencies above 1Hz.
#### Schottky Diode
These normally have a really small forward voltage drop.
#### Zener Diode
Consists of a silicon PN-Junction

View File

@ -0,0 +1,3 @@
# Diode Example
![[1N4148.pdf]]