From b755d6657162e0073cf466c28a482fe040b03822 Mon Sep 17 00:00:00 2001 From: Max Richter Date: Wed, 11 Oct 2023 15:52:30 +0200 Subject: [PATCH] feat: use different .dtfiles config setup --- configs/.bashrc => .bashrc | 0 {configs => .config}/dunst/dunstrc | 0 {configs => .config}/dunst/scripts/actions | 0 .../dunst/scripts/handle-music | 0 {configs => .config}/dunst/scripts/test | 0 {configs => .config}/helix/.gitignore | 0 {configs => .config}/helix/config.toml | 0 .../helix/themes/catppuccin_mocha.toml | 0 .config/htop/htoprc | 63 + {configs => .config}/hypr/hyprland.conf | 0 {configs => .config}/hypr/scripts/bg-switcher | 0 .../lazydocker/config.yml | 0 {configs => .config}/lazygit/.gitignore | 0 {configs => .config}/lazygit/config.yml | 0 {configs => .config}/mako/config | 0 {configs => .config}/nvim/.gitignore | 0 {configs => .config}/nvim/.luarc.json | 0 .config/nvim/after/ftplugin/gdscript.lua | 9 + .../nvim/ftplugin/TelescopePrompt.vim | 0 {configs => .config}/nvim/ftplugin/http.lua | 0 {configs => .config}/nvim/ftplugin/json.lua | 0 .../nvim/ftplugin/markdown.vim | 0 .../nvim/ftplugin/nvimtree.vim | 0 {configs => .config}/nvim/ftplugin/qf.lua | 0 .../nvim/ftplugin/symboltree.lua | 0 .../nvim/ftplugin/typescriptreact.lua | 0 {configs => .config}/nvim/init.lua | 0 .config/nvim/lazy-lock.json | 71 + .../nvim/lua/max/core/autocommands.lua | 0 .../nvim/lua/max/core/bootstrap.lua | 0 .../nvim/lua/max/core/keymappings.lua | 0 .../nvim/lua/max/core/options.lua | 0 .../nvim/lua/max/core/plugins.lua | 0 .../nvim/lua/max/functions/translate/init.lua | 0 .../lua/max/functions/translate/languages.lua | 0 .../nvim/lua/max/plugins/arduino.lua | 0 .../nvim/lua/max/plugins/autocomplete.lua | 0 .../lua/max/plugins/autocomplete/snippets.lua | 0 .../nvim/lua/max/plugins/autolist.lua | 0 .../nvim/lua/max/plugins/boole.lua | 0 .../nvim/lua/max/plugins/colorizer.lua | 0 .../nvim/lua/max/plugins/dadbod.lua | 0 .../nvim/lua/max/plugins/dap.lua | 0 .../nvim/lua/max/plugins/dashboard.lua | 0 .../nvim/lua/max/plugins/git-conflict.lua | 0 .../nvim/lua/max/plugins/git-signs.lua | 0 .../nvim/lua/max/plugins/jump.lua | 0 .../nvim/lua/max/plugins/lsp.lua | 1 + .../nvim/lua/max/plugins/lsp/glsl.lua | 0 .../nvim/lua/max/plugins/lspsage.lua | 0 .../nvim/lua/max/plugins/lualine.lua | 6 +- .../nvim/lua/max/plugins/mini.lua | 0 .../nvim/lua/max/plugins/neoai.lua | 0 .../nvim/lua/max/plugins/neotest.lua | 1 - .../nvim/lua/max/plugins/neotree.lua | 0 .../nvim/lua/max/plugins/noice.lua | 0 .../nvim/lua/max/plugins/notify.lua | 0 .../nvim/lua/max/plugins/oil.lua | 0 .../nvim/lua/max/plugins/recorder.lua | 0 .../nvim/lua/max/plugins/rest.lua | 0 .../nvim/lua/max/plugins/scrollbar.lua | 0 .../nvim/lua/max/plugins/session.lua | 0 .../nvim/lua/max/plugins/sniprun.lua | 0 .../nvim/lua/max/plugins/statuscolumn.lua | 0 .../nvim/lua/max/plugins/sudoku.lua | 0 .../nvim/lua/max/plugins/tabs.lua | 0 .../nvim/lua/max/plugins/telescope.lua | 0 .../nvim/lua/max/plugins/theme.lua | 0 .../nvim/lua/max/plugins/theme/ayu.lua | 0 .../nvim/lua/max/plugins/theme/catpuccin.lua | 0 .../nvim/lua/max/plugins/theme/everblush.lua | 0 .../nvim/lua/max/plugins/theme/flexoki.lua | 4 + .../nvim/lua/max/plugins/theme/tokyo.lua | 0 .../nvim/lua/max/plugins/theme/tundra.lua | 0 .../nvim/lua/max/plugins/todo-comments.lua | 0 .../nvim/lua/max/plugins/toggleterm.lua | 0 .../nvim/lua/max/plugins/translate.lua | 0 .../nvim/lua/max/plugins/treesitter.lua | 0 .../nvim/lua/max/plugins/trouble.lua | 0 .../nvim/lua/max/plugins/typescript.lua | 1 - .../nvim/lua/max/plugins/undotree.lua | 0 .../nvim/lua/max/plugins/which-key.lua | 0 {configs => .config}/nvim/stylua.toml | 0 {configs => .config}/rofi/config.rasi | 0 {configs => .config}/rofi/slate.rasi | 0 {configs => .config}/sway/config | 0 .../sway/scripts/create-floating | 0 .../sway/scripts/debug-window | 0 {configs => .config}/sway/scripts/grimshot | 0 {configs => .config}/sway/scripts/lock-screen | 0 {configs => .config}/sway/scripts/nohup.out | 0 .../sway/scripts/select-window | 0 {configs => .config}/sway/scripts/toggle-bar | 0 {configs => .config}/sway/scripts/toggle-gaps | 0 .../sway/scripts/toggle-layout | 0 {configs => .config}/sway/scripts/wl-present | 0 {configs => .config}/waybar/.gitignore | 0 {configs => .config}/waybar/config | 0 {configs => .config}/waybar/scripts/nohup.out | 0 .../waybar/scripts/power-consumption | 0 .../waybar/scripts/power-profile | 0 {configs => .config}/waybar/scripts/set-theme | 0 .../waybar/scripts/toggle-hdpi | 0 .../waybar/scripts/toggle-theme | 0 {configs => .config}/waybar/style.css | 0 {configs => .config}/wezterm/colors.lua | 0 {configs => .config}/wezterm/utils.lua | 0 {configs => .config}/wezterm/wezterm.lua | 0 {configs => .config}/wofi/config | 0 .../wofi/scripts/open-localhost | 0 .../wofi/scripts/open-project | 0 {configs => .config}/wofi/scripts/power-menu | 0 .../wofi/scripts/select-emoji | 0 {configs => .config}/wofi/scripts/select-vpn | 0 {configs => .config}/wofi/scripts/select-wifi | 0 {configs => .config}/wofi/scripts/web-search | 0 {configs => .config}/wofi/style.css | 0 {configs => .config}/zathura/zathurarc | 0 {configs => .config}/zsh/antigen.zsh | 0 {configs => .config}/zsh/functions.zsh | 0 {configs => .config}/zsh/functions/cht.zsh | 0 {configs => .config}/zsh/functions/co.zsh | 0 {configs => .config}/zsh/functions/conf.zsh | 0 {configs => .config}/zsh/functions/dv.zsh | 0 {configs => .config}/zsh/functions/fp.zsh | 0 {configs => .config}/zsh/functions/fx.zsh | 0 .../zsh/functions/mv-safe.zsh | 0 {configs => .config}/zsh/functions/myip.zsh | 0 {configs => .config}/zsh/functions/note.zsh | 0 {configs => .config}/zsh/functions/rn.zsh | 0 {configs => .config}/zsh/functions/run.zsh | 0 .../zsh/functions/ssh_selector.zsh | 0 {configs => .config}/zsh/functions/start.zsh | 0 {configs => .config}/zsh/functions/sum.zsh | 0 {configs => .config}/zsh/functions/wp.zsh | 0 {configs => .config}/zsh/update-repo.zsh | 0 {configs => .config}/zsh/wezterm.sh | 0 configs/.dircolors => .dircolors | 0 .luarc.json => .dotfiles/.luarc.json | 0 Dockerfile => .dotfiles/Dockerfile | 0 .../completions}/_arduino-cli | 0 {completions => .dotfiles/completions}/_fx | 0 .../completions}/init.zsh | 0 ...Fira Mono Bold Nerd Font Complete Mono.otf | Bin ...ra Mono Medium Nerd Font Complete Mono.otf | Bin ...a Mono Regular Nerd Font Complete Mono.otf | Bin .../helpers}/asdf-install.sh | 0 {helpers => .dotfiles/helpers}/installer.sh | 0 {helpers => .dotfiles/helpers}/linker.sh | 0 {helpers => .dotfiles/helpers}/multiselect.sh | 0 {helpers => .dotfiles/helpers}/prompt.sh | 0 .dotfiles/helpers/spinner.sh | 0 .../install}/install-asdf.sh | 0 .../install}/install-nvim.sh | 0 {install => .dotfiles/install}/oh-my-zsh.sh | 0 {install => .dotfiles/install}/p10k.sh | 0 .../install}/zsh-autosuggestions.sh | 0 setup.sh => .dotfiles/setup.sh | 0 .gitconfig | 15 + .gitignore | 2 +- configs/.p10k.zsh => .p10k.zsh | 0 configs/zsh/aliases.sh => .profile | 29 +- .ssh/config | 59 + configs/.tmux.conf => .tmux.conf | 0 .tool-versions | 9 + configs/.zshrc => .zshrc | 5 +- configs/.gitignore | 1 - configs/alacritty/alacritty.yml | 811 ---------- configs/kitty/current-theme.conf | 21 - configs/kitty/kitty.conf | 1319 ----------------- configs/kitty/kitty.conf.bak | 1319 ----------------- configs/kitty/themes/Argonaut.conf | 21 - configs/kitty/themes/Atom One Light.conf | 21 - configs/nvim/lazy-lock.json | 71 - install.sh | 5 +- 175 files changed, 268 insertions(+), 3596 deletions(-) rename configs/.bashrc => .bashrc (100%) rename {configs => .config}/dunst/dunstrc (100%) rename {configs => .config}/dunst/scripts/actions (100%) rename {configs => .config}/dunst/scripts/handle-music (100%) rename {configs => .config}/dunst/scripts/test (100%) rename {configs => .config}/helix/.gitignore (100%) rename {configs => .config}/helix/config.toml (100%) rename {configs => .config}/helix/themes/catppuccin_mocha.toml (100%) create mode 100644 .config/htop/htoprc rename {configs => .config}/hypr/hyprland.conf (100%) rename {configs => .config}/hypr/scripts/bg-switcher (100%) rename helpers/spinner.sh => .config/lazydocker/config.yml (100%) rename {configs => .config}/lazygit/.gitignore (100%) rename {configs => .config}/lazygit/config.yml (100%) rename {configs => .config}/mako/config (100%) rename {configs => .config}/nvim/.gitignore (100%) rename {configs => .config}/nvim/.luarc.json (100%) create mode 100644 .config/nvim/after/ftplugin/gdscript.lua rename {configs => .config}/nvim/ftplugin/TelescopePrompt.vim (100%) rename {configs => .config}/nvim/ftplugin/http.lua (100%) rename {configs => .config}/nvim/ftplugin/json.lua (100%) rename {configs => .config}/nvim/ftplugin/markdown.vim (100%) rename {configs => .config}/nvim/ftplugin/nvimtree.vim (100%) rename {configs => .config}/nvim/ftplugin/qf.lua (100%) rename {configs => .config}/nvim/ftplugin/symboltree.lua (100%) rename {configs => .config}/nvim/ftplugin/typescriptreact.lua (100%) rename {configs => .config}/nvim/init.lua (100%) create mode 100644 .config/nvim/lazy-lock.json rename {configs => .config}/nvim/lua/max/core/autocommands.lua (100%) rename {configs => .config}/nvim/lua/max/core/bootstrap.lua (100%) rename {configs => .config}/nvim/lua/max/core/keymappings.lua (100%) rename {configs => .config}/nvim/lua/max/core/options.lua (100%) rename {configs => .config}/nvim/lua/max/core/plugins.lua (100%) rename {configs => .config}/nvim/lua/max/functions/translate/init.lua (100%) rename {configs => .config}/nvim/lua/max/functions/translate/languages.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/arduino.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/autocomplete.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/autocomplete/snippets.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/autolist.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/boole.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/colorizer.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/dadbod.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/dap.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/dashboard.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/git-conflict.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/git-signs.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/jump.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/lsp.lua (99%) rename {configs => .config}/nvim/lua/max/plugins/lsp/glsl.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/lspsage.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/lualine.lua (96%) rename {configs => .config}/nvim/lua/max/plugins/mini.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/neoai.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/neotest.lua (87%) rename {configs => .config}/nvim/lua/max/plugins/neotree.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/noice.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/notify.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/oil.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/recorder.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/rest.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/scrollbar.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/session.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/sniprun.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/statuscolumn.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/sudoku.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/tabs.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/telescope.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/theme.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/theme/ayu.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/theme/catpuccin.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/theme/everblush.lua (100%) create mode 100644 .config/nvim/lua/max/plugins/theme/flexoki.lua rename {configs => .config}/nvim/lua/max/plugins/theme/tokyo.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/theme/tundra.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/todo-comments.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/toggleterm.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/translate.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/treesitter.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/trouble.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/typescript.lua (90%) rename {configs => .config}/nvim/lua/max/plugins/undotree.lua (100%) rename {configs => .config}/nvim/lua/max/plugins/which-key.lua (100%) rename {configs => .config}/nvim/stylua.toml (100%) rename {configs => .config}/rofi/config.rasi (100%) rename {configs => .config}/rofi/slate.rasi (100%) rename {configs => .config}/sway/config (100%) rename {configs => .config}/sway/scripts/create-floating (100%) rename {configs => .config}/sway/scripts/debug-window (100%) rename {configs => .config}/sway/scripts/grimshot (100%) rename {configs => .config}/sway/scripts/lock-screen (100%) rename {configs => .config}/sway/scripts/nohup.out (100%) rename {configs => .config}/sway/scripts/select-window (100%) rename {configs => .config}/sway/scripts/toggle-bar (100%) rename {configs => .config}/sway/scripts/toggle-gaps (100%) rename {configs => .config}/sway/scripts/toggle-layout (100%) rename {configs => .config}/sway/scripts/wl-present (100%) rename {configs => .config}/waybar/.gitignore (100%) rename {configs => .config}/waybar/config (100%) rename {configs => .config}/waybar/scripts/nohup.out (100%) rename {configs => .config}/waybar/scripts/power-consumption (100%) rename {configs => .config}/waybar/scripts/power-profile (100%) rename {configs => .config}/waybar/scripts/set-theme (100%) rename {configs => .config}/waybar/scripts/toggle-hdpi (100%) rename {configs => .config}/waybar/scripts/toggle-theme (100%) rename {configs => .config}/waybar/style.css (100%) rename {configs => .config}/wezterm/colors.lua (100%) rename {configs => .config}/wezterm/utils.lua (100%) rename {configs => .config}/wezterm/wezterm.lua (100%) rename {configs => .config}/wofi/config (100%) rename {configs => .config}/wofi/scripts/open-localhost (100%) rename {configs => .config}/wofi/scripts/open-project (100%) rename {configs => .config}/wofi/scripts/power-menu (100%) rename {configs => .config}/wofi/scripts/select-emoji (100%) rename {configs => .config}/wofi/scripts/select-vpn (100%) rename {configs => .config}/wofi/scripts/select-wifi (100%) rename {configs => .config}/wofi/scripts/web-search (100%) rename {configs => .config}/wofi/style.css (100%) rename {configs => .config}/zathura/zathurarc (100%) rename {configs => .config}/zsh/antigen.zsh (100%) rename {configs => .config}/zsh/functions.zsh (100%) rename {configs => .config}/zsh/functions/cht.zsh (100%) rename {configs => .config}/zsh/functions/co.zsh (100%) rename {configs => .config}/zsh/functions/conf.zsh (100%) rename {configs => .config}/zsh/functions/dv.zsh (100%) rename {configs => .config}/zsh/functions/fp.zsh (100%) rename {configs => .config}/zsh/functions/fx.zsh (100%) rename {configs => .config}/zsh/functions/mv-safe.zsh (100%) rename {configs => .config}/zsh/functions/myip.zsh (100%) rename {configs => .config}/zsh/functions/note.zsh (100%) rename {configs => .config}/zsh/functions/rn.zsh (100%) rename {configs => .config}/zsh/functions/run.zsh (100%) rename {configs => .config}/zsh/functions/ssh_selector.zsh (100%) rename {configs => .config}/zsh/functions/start.zsh (100%) rename {configs => .config}/zsh/functions/sum.zsh (100%) rename {configs => .config}/zsh/functions/wp.zsh (100%) rename {configs => .config}/zsh/update-repo.zsh (100%) rename {configs => .config}/zsh/wezterm.sh (100%) rename configs/.dircolors => .dircolors (100%) rename .luarc.json => .dotfiles/.luarc.json (100%) rename Dockerfile => .dotfiles/Dockerfile (100%) rename {completions => .dotfiles/completions}/_arduino-cli (100%) rename {completions => .dotfiles/completions}/_fx (100%) rename {completions => .dotfiles/completions}/init.zsh (100%) rename {fonts => .dotfiles/fonts}/Fira Mono Bold Nerd Font Complete Mono.otf (100%) rename {fonts => .dotfiles/fonts}/Fira Mono Medium Nerd Font Complete Mono.otf (100%) rename {fonts => .dotfiles/fonts}/Fira Mono Regular Nerd Font Complete Mono.otf (100%) rename {helpers => .dotfiles/helpers}/asdf-install.sh (100%) rename {helpers => .dotfiles/helpers}/installer.sh (100%) rename {helpers => .dotfiles/helpers}/linker.sh (100%) rename {helpers => .dotfiles/helpers}/multiselect.sh (100%) rename {helpers => .dotfiles/helpers}/prompt.sh (100%) create mode 100644 .dotfiles/helpers/spinner.sh rename {install => .dotfiles/install}/install-asdf.sh (100%) rename {install => .dotfiles/install}/install-nvim.sh (100%) rename {install => .dotfiles/install}/oh-my-zsh.sh (100%) rename {install => .dotfiles/install}/p10k.sh (100%) rename {install => .dotfiles/install}/zsh-autosuggestions.sh (100%) rename setup.sh => .dotfiles/setup.sh (100%) create mode 100644 .gitconfig rename configs/.p10k.zsh => .p10k.zsh (100%) rename configs/zsh/aliases.sh => .profile (69%) create mode 100644 .ssh/config rename configs/.tmux.conf => .tmux.conf (100%) create mode 100644 .tool-versions rename configs/.zshrc => .zshrc (97%) delete mode 100644 configs/.gitignore delete mode 100644 configs/alacritty/alacritty.yml delete mode 100644 configs/kitty/current-theme.conf delete mode 100644 configs/kitty/kitty.conf delete mode 100644 configs/kitty/kitty.conf.bak delete mode 100644 configs/kitty/themes/Argonaut.conf delete mode 100644 configs/kitty/themes/Atom One Light.conf delete mode 100644 configs/nvim/lazy-lock.json diff --git a/configs/.bashrc b/.bashrc similarity index 100% rename from configs/.bashrc rename to .bashrc diff --git a/configs/dunst/dunstrc b/.config/dunst/dunstrc similarity index 100% rename from configs/dunst/dunstrc rename to .config/dunst/dunstrc diff --git a/configs/dunst/scripts/actions b/.config/dunst/scripts/actions similarity index 100% rename from configs/dunst/scripts/actions rename to .config/dunst/scripts/actions diff --git a/configs/dunst/scripts/handle-music b/.config/dunst/scripts/handle-music similarity index 100% rename from configs/dunst/scripts/handle-music rename to .config/dunst/scripts/handle-music diff --git a/configs/dunst/scripts/test b/.config/dunst/scripts/test similarity index 100% rename from configs/dunst/scripts/test rename to .config/dunst/scripts/test diff --git a/configs/helix/.gitignore b/.config/helix/.gitignore similarity index 100% rename from configs/helix/.gitignore rename to .config/helix/.gitignore diff --git a/configs/helix/config.toml b/.config/helix/config.toml similarity index 100% rename from configs/helix/config.toml rename to .config/helix/config.toml diff --git a/configs/helix/themes/catppuccin_mocha.toml b/.config/helix/themes/catppuccin_mocha.toml similarity index 100% rename from configs/helix/themes/catppuccin_mocha.toml rename to .config/helix/themes/catppuccin_mocha.toml diff --git a/.config/htop/htoprc b/.config/htop/htoprc new file mode 100644 index 0000000..07bf52d --- /dev/null +++ b/.config/htop/htoprc @@ -0,0 +1,63 @@ +# Beware! This file is rewritten by htop when settings are changed in the interface. +# The parser is also very primitive, and not human-friendly. +htop_version=3.2.2 +config_reader_min_version=3 +fields=0 48 17 18 38 39 40 2 46 47 49 1 +hide_kernel_threads=1 +hide_userland_threads=0 +hide_running_in_container=0 +shadow_other_users=0 +show_thread_names=0 +show_program_path=1 +highlight_base_name=0 +highlight_deleted_exe=1 +shadow_distribution_path_prefix=0 +highlight_megabytes=1 +highlight_threads=1 +highlight_changes=0 +highlight_changes_delay_secs=5 +find_comm_in_cmdline=1 +strip_exe_from_cmdline=1 +show_merged_command=0 +header_margin=1 +screen_tabs=1 +detailed_cpu_time=0 +cpu_count_from_one=0 +show_cpu_usage=1 +show_cpu_frequency=0 +show_cpu_temperature=0 +degree_fahrenheit=0 +update_process_names=0 +account_guest_in_cpu_meter=0 +color_scheme=0 +enable_mouse=1 +delay=15 +hide_function_bar=0 +header_layout=two_50_50 +column_meters_0=LeftCPUs Memory Swap +column_meter_modes_0=1 1 1 +column_meters_1=RightCPUs Tasks LoadAverage Uptime +column_meter_modes_1=1 2 2 2 +tree_view=0 +sort_key=46 +tree_sort_key=0 +sort_direction=-1 +tree_sort_direction=1 +tree_view_always_by_pid=0 +all_branches_collapsed=0 +screen:Main=PID USER PRIORITY NICE M_VIRT M_RESIDENT M_SHARE STATE PERCENT_CPU PERCENT_MEM TIME Command +.sort_key=PERCENT_CPU +.tree_sort_key=PID +.tree_view=0 +.tree_view_always_by_pid=0 +.sort_direction=-1 +.tree_sort_direction=1 +.all_branches_collapsed=0 +screen:I/O=PID USER IO_PRIORITY IO_RATE IO_READ_RATE IO_WRITE_RATE PERCENT_SWAP_DELAY PERCENT_IO_DELAY Command +.sort_key=IO_RATE +.tree_sort_key=PID +.tree_view=0 +.tree_view_always_by_pid=0 +.sort_direction=-1 +.tree_sort_direction=1 +.all_branches_collapsed=0 diff --git a/configs/hypr/hyprland.conf b/.config/hypr/hyprland.conf similarity index 100% rename from configs/hypr/hyprland.conf rename to .config/hypr/hyprland.conf diff --git a/configs/hypr/scripts/bg-switcher b/.config/hypr/scripts/bg-switcher similarity index 100% rename from configs/hypr/scripts/bg-switcher rename to .config/hypr/scripts/bg-switcher diff --git a/helpers/spinner.sh b/.config/lazydocker/config.yml similarity index 100% rename from helpers/spinner.sh rename to .config/lazydocker/config.yml diff --git a/configs/lazygit/.gitignore b/.config/lazygit/.gitignore similarity index 100% rename from configs/lazygit/.gitignore rename to .config/lazygit/.gitignore diff --git a/configs/lazygit/config.yml b/.config/lazygit/config.yml similarity index 100% rename from configs/lazygit/config.yml rename to .config/lazygit/config.yml diff --git a/configs/mako/config b/.config/mako/config similarity index 100% rename from configs/mako/config rename to .config/mako/config diff --git a/configs/nvim/.gitignore b/.config/nvim/.gitignore similarity index 100% rename from configs/nvim/.gitignore rename to .config/nvim/.gitignore diff --git a/configs/nvim/.luarc.json b/.config/nvim/.luarc.json similarity index 100% rename from configs/nvim/.luarc.json rename to .config/nvim/.luarc.json diff --git a/.config/nvim/after/ftplugin/gdscript.lua b/.config/nvim/after/ftplugin/gdscript.lua new file mode 100644 index 0000000..8c1eece --- /dev/null +++ b/.config/nvim/after/ftplugin/gdscript.lua @@ -0,0 +1,9 @@ +local cmd = vim.lsp.rpc.connect('172.29.144.1', 6005) +local util = require 'lspconfig.util' +local lsp = require 'lspconfig' + +lsp.gdscript.setup { + cmd = cmd, + filetypes = { 'gd', 'gdscript', 'gdscript3' }, + root_dir = util.root_pattern('project.godot', '.git'), +} diff --git a/configs/nvim/ftplugin/TelescopePrompt.vim b/.config/nvim/ftplugin/TelescopePrompt.vim similarity index 100% rename from configs/nvim/ftplugin/TelescopePrompt.vim rename to .config/nvim/ftplugin/TelescopePrompt.vim diff --git a/configs/nvim/ftplugin/http.lua b/.config/nvim/ftplugin/http.lua similarity index 100% rename from configs/nvim/ftplugin/http.lua rename to .config/nvim/ftplugin/http.lua diff --git a/configs/nvim/ftplugin/json.lua b/.config/nvim/ftplugin/json.lua similarity index 100% rename from configs/nvim/ftplugin/json.lua rename to .config/nvim/ftplugin/json.lua diff --git a/configs/nvim/ftplugin/markdown.vim b/.config/nvim/ftplugin/markdown.vim similarity index 100% rename from configs/nvim/ftplugin/markdown.vim rename to .config/nvim/ftplugin/markdown.vim diff --git a/configs/nvim/ftplugin/nvimtree.vim b/.config/nvim/ftplugin/nvimtree.vim similarity index 100% rename from configs/nvim/ftplugin/nvimtree.vim rename to .config/nvim/ftplugin/nvimtree.vim diff --git a/configs/nvim/ftplugin/qf.lua b/.config/nvim/ftplugin/qf.lua similarity index 100% rename from configs/nvim/ftplugin/qf.lua rename to .config/nvim/ftplugin/qf.lua diff --git a/configs/nvim/ftplugin/symboltree.lua b/.config/nvim/ftplugin/symboltree.lua similarity index 100% rename from configs/nvim/ftplugin/symboltree.lua rename to .config/nvim/ftplugin/symboltree.lua diff --git a/configs/nvim/ftplugin/typescriptreact.lua b/.config/nvim/ftplugin/typescriptreact.lua similarity index 100% rename from configs/nvim/ftplugin/typescriptreact.lua rename to .config/nvim/ftplugin/typescriptreact.lua diff --git a/configs/nvim/init.lua b/.config/nvim/init.lua similarity index 100% rename from configs/nvim/init.lua rename to .config/nvim/init.lua diff --git a/.config/nvim/lazy-lock.json b/.config/nvim/lazy-lock.json new file mode 100644 index 0000000..5fe3a11 --- /dev/null +++ b/.config/nvim/lazy-lock.json @@ -0,0 +1,71 @@ +{ + "LuaSnip": { "branch": "master", "commit": "cdbf6f41381e5ee4810b4b09284b603d8f18365d" }, + "alpha-nvim": { "branch": "main", "commit": "234822140b265ec4ba3203e3e0be0e0bb826dff5" }, + "arduino-helper.nvim": { "branch": "master", "commit": "5ec57de680a94f8e948e2e0c6328939b9b63a598" }, + "autolist.nvim": { "branch": "main", "commit": "5f70a5f99e96c8fe3069de042abd2a8ed2deb855" }, + "barbar.nvim": { "branch": "master", "commit": "283bceab39f549c5e5228212661750704fcfcd9e" }, + "boole.nvim": { "branch": "main", "commit": "7b4a3dae28e3b2497747aa840439e9493cabdc49" }, + "catppuccin": { "branch": "main", "commit": "fc537040147f0374a22b88142a20eb6781141f0b" }, + "cmp-buffer": { "branch": "main", "commit": "3022dbc9166796b644a841a02de8dd1cc1d311fa" }, + "cmp-emoji": { "branch": "main", "commit": "19075c36d5820253d32e2478b6aaf3734aeaafa0" }, + "cmp-nvim-lsp": { "branch": "main", "commit": "44b16d11215dce86f253ce0c30949813c0a90765" }, + "cmp-nvim-lua": { "branch": "main", "commit": "f12408bdb54c39c23e67cab726264c10db33ada8" }, + "cmp-path": { "branch": "main", "commit": "91ff86cd9c29299a64f968ebb45846c485725f23" }, + "cmp_luasnip": { "branch": "master", "commit": "05a9ab28b53f71d1aece421ef32fee2cb857a843" }, + "copilot-cmp": { "branch": "master", "commit": "72fbaa03695779f8349be3ac54fa8bd77eed3ee3" }, + "copilot.lua": { "branch": "master", "commit": "1a8032ae496916ccc7a7a52ee79194fbef29f462" }, + "flit.nvim": { "branch": "main", "commit": "498b3a4864e697f1ed1145e518c4c78c776c55d8" }, + "friendly-snippets": { "branch": "main", "commit": "43727c2ff84240e55d4069ec3e6158d74cb534b6" }, + "git-conflict.nvim": { "branch": "main", "commit": "4e0191c9a0ae05d7fbdcdc7f15cd358f56d23bfb" }, + "gitsigns.nvim": { "branch": "main", "commit": "ff01d34daaed72f271a8ffa088a7e839a60c640f" }, + "lazy.nvim": { "branch": "main", "commit": "84d13c1d7e9a887a89525196dababdaad5021c93" }, + "leap.nvim": { "branch": "main", "commit": "5efe985cf68fac3b6a6dfe7a75fbfaca8db2af9c" }, + "lsp-format.nvim": { "branch": "master", "commit": "e8782a5468a4849ae440a1531be559d85aebe142" }, + "lspkind.nvim": { "branch": "master", "commit": "57610d5ab560c073c465d6faf0c19f200cb67e6e" }, + "lspsaga.nvim": { "branch": "main", "commit": "79f80724f5b47cb6f515d96b5b4c176feacfb677" }, + "lualine-lsp-progress": { "branch": "master", "commit": "56842d097245a08d77912edf5f2a69ba29f275d7" }, + "lualine.nvim": { "branch": "master", "commit": "45e27ca739c7be6c49e5496d14fcf45a303c3a63" }, + "mason-lspconfig.nvim": { "branch": "main", "commit": "ddefe5ab051e7ca6a7b374754f0920c44668b54f" }, + "mason.nvim": { "branch": "main", "commit": "cd7835b15f5a4204fc37e0aa739347472121a54c" }, + "mini.nvim": { "branch": "main", "commit": "8b43796d93b09c9f63076c69664e585d7ef28b62" }, + "neo-tree.nvim": { "branch": "main", "commit": "6f8c49956c89e9fefae6acdfe1d57c6293b0a03d" }, + "neoai.nvim": { "branch": "main", "commit": "248c2001d0b24e58049eeb6884a79860923cfe13" }, + "neotest": { "branch": "master", "commit": "1e67a504d03def3a6a1125d934cb511680f72555" }, + "neotest-jest": { "branch": "main", "commit": "ae559fbd405084ee38dd711eede6d74f3dc1d463" }, + "neotest-vitest": { "branch": "main", "commit": "d6577b191e16c174bffbec1eadfcd65c22fdcc0d" }, + "noice.nvim": { "branch": "main", "commit": "fcd01710ff6918d4d3ef90c8e36f3addacba13bf" }, + "nui.nvim": { "branch": "main", "commit": "c0c8e347ceac53030f5c1ece1c5a5b6a17a25b32" }, + "null-ls.nvim": { "branch": "main", "commit": "0010ea927ab7c09ef0ce9bf28c2b573fc302f5a7" }, + "nvim-cmp": { "branch": "main", "commit": "5dce1b778b85c717f6614e3f4da45e9f19f54435" }, + "nvim-colorizer.lua": { "branch": "master", "commit": "36c610a9717cc9ec426a07c8e6bf3b3abcb139d6" }, + "nvim-dap": { "branch": "master", "commit": "e79007c6d7a24db3ad19ea9196f1f0b2840e8ae7" }, + "nvim-dap-ui": { "branch": "master", "commit": "34160a7ce6072ef332f350ae1d4a6a501daf0159" }, + "nvim-lspconfig": { "branch": "master", "commit": "2b361e043810d5587d9af0787f8ce40da92ec5e9" }, + "nvim-notify": { "branch": "master", "commit": "e4a2022f4fec2d5ebc79afa612f96d8b11c627b3" }, + "nvim-recorder": { "branch": "main", "commit": "e6ecc8ba0b950df9ac0ef7507dc95cb0037bead1" }, + "nvim-scrollbar": { "branch": "main", "commit": "35f99d559041c7c0eff3a41f9093581ceea534e8" }, + "nvim-toggleterm.lua": { "branch": "main", "commit": "c80844fd52ba76f48fabf83e2b9f9b93273f418d" }, + "nvim-treesitter": { "branch": "master", "commit": "0eb1a0ad1c82e080e77e7b9d7a5e42632cefb543" }, + "nvim-treesitter-textobjects": { "branch": "master", "commit": "76c7a89b41de77a4f83fb77fa072c5ad7605fe3b" }, + "nvim-ts-autotag": { "branch": "main", "commit": "6be1192965df35f94b8ea6d323354f7dc7a557e4" }, + "nvim-ts-context-commentstring": { "branch": "main", "commit": "7241635869b7a8115893ffa67bab3907756caf4f" }, + "nvim-web-devicons": { "branch": "master", "commit": "a1e6268779411048a87f767a27380089362a0ce2" }, + "oil.nvim": { "branch": "master", "commit": "f72b9b2637eec2b3db8255c196aa4bf11231af81" }, + "persisted.nvim": { "branch": "main", "commit": "315cd1a8a501ca8e0c1d55f0c245b9cc0e1ffa01" }, + "plenary.nvim": { "branch": "master", "commit": "9ce85b0f7dcfe5358c0be937ad23e456907d410b" }, + "popup.nvim": { "branch": "master", "commit": "b7404d35d5d3548a82149238289fa71f7f6de4ac" }, + "rest.nvim": { "branch": "main", "commit": "8b62563cfb19ffe939a260504944c5975796a682" }, + "sniprun": { "branch": "master", "commit": "1c152ee5d883db7233e3891012bc4f0f9437a82b" }, + "statuscol.nvim": { "branch": "main", "commit": "98d02fc90ebd7c4674ec935074d1d09443d49318" }, + "telescope-fzf-native.nvim": { "branch": "main", "commit": "6c921ca12321edaa773e324ef64ea301a1d0da62" }, + "telescope.nvim": { "branch": "master", "commit": "5a747a9587e4bfc4ae086a38cc679fe54f983b69" }, + "todo-comments.nvim": { "branch": "main", "commit": "3094ead8edfa9040de2421deddec55d3762f64d1" }, + "translate.nvim": { "branch": "main", "commit": "30cc9e9f339b61e7bd40bc1ba7af73ea193bf589" }, + "trouble.nvim": { "branch": "main", "commit": "02219b557d4726a789be58c5d6bd6e139c46a9fe" }, + "typescript-tools.nvim": { "branch": "master", "commit": "ebddb35900bbf5fa41fffa0463b676bf08e474e6" }, + "undotree": { "branch": "master", "commit": "0e11ba7325efbbb3f3bebe06213afa3e7ec75131" }, + "vim-dadbod": { "branch": "master", "commit": "ee7e3bb5377d43cb31a101718dd0cfc09bb87d4b" }, + "vim-dadbod-completion": { "branch": "master", "commit": "fc7321a17f4c55db11fae89a884ddf4724020bae" }, + "vim-dadbod-ui": { "branch": "master", "commit": "95fd22469507e86b78aa55d868c14108adee2881" }, + "which-key.nvim": { "branch": "main", "commit": "7ccf476ebe0445a741b64e36c78a682c1c6118b7" } +} \ No newline at end of file diff --git a/configs/nvim/lua/max/core/autocommands.lua b/.config/nvim/lua/max/core/autocommands.lua similarity index 100% rename from configs/nvim/lua/max/core/autocommands.lua rename to .config/nvim/lua/max/core/autocommands.lua diff --git a/configs/nvim/lua/max/core/bootstrap.lua b/.config/nvim/lua/max/core/bootstrap.lua similarity index 100% rename from configs/nvim/lua/max/core/bootstrap.lua rename to .config/nvim/lua/max/core/bootstrap.lua diff --git a/configs/nvim/lua/max/core/keymappings.lua b/.config/nvim/lua/max/core/keymappings.lua similarity index 100% rename from configs/nvim/lua/max/core/keymappings.lua rename to .config/nvim/lua/max/core/keymappings.lua diff --git a/configs/nvim/lua/max/core/options.lua b/.config/nvim/lua/max/core/options.lua similarity index 100% rename from configs/nvim/lua/max/core/options.lua rename to .config/nvim/lua/max/core/options.lua diff --git a/configs/nvim/lua/max/core/plugins.lua b/.config/nvim/lua/max/core/plugins.lua similarity index 100% rename from configs/nvim/lua/max/core/plugins.lua rename to .config/nvim/lua/max/core/plugins.lua diff --git a/configs/nvim/lua/max/functions/translate/init.lua b/.config/nvim/lua/max/functions/translate/init.lua similarity index 100% rename from configs/nvim/lua/max/functions/translate/init.lua rename to .config/nvim/lua/max/functions/translate/init.lua diff --git a/configs/nvim/lua/max/functions/translate/languages.lua b/.config/nvim/lua/max/functions/translate/languages.lua similarity index 100% rename from configs/nvim/lua/max/functions/translate/languages.lua rename to .config/nvim/lua/max/functions/translate/languages.lua diff --git a/configs/nvim/lua/max/plugins/arduino.lua b/.config/nvim/lua/max/plugins/arduino.lua similarity index 100% rename from configs/nvim/lua/max/plugins/arduino.lua rename to .config/nvim/lua/max/plugins/arduino.lua diff --git a/configs/nvim/lua/max/plugins/autocomplete.lua b/.config/nvim/lua/max/plugins/autocomplete.lua similarity index 100% rename from configs/nvim/lua/max/plugins/autocomplete.lua rename to .config/nvim/lua/max/plugins/autocomplete.lua diff --git a/configs/nvim/lua/max/plugins/autocomplete/snippets.lua b/.config/nvim/lua/max/plugins/autocomplete/snippets.lua similarity index 100% rename from configs/nvim/lua/max/plugins/autocomplete/snippets.lua rename to .config/nvim/lua/max/plugins/autocomplete/snippets.lua diff --git a/configs/nvim/lua/max/plugins/autolist.lua b/.config/nvim/lua/max/plugins/autolist.lua similarity index 100% rename from configs/nvim/lua/max/plugins/autolist.lua rename to .config/nvim/lua/max/plugins/autolist.lua diff --git a/configs/nvim/lua/max/plugins/boole.lua b/.config/nvim/lua/max/plugins/boole.lua similarity index 100% rename from configs/nvim/lua/max/plugins/boole.lua rename to .config/nvim/lua/max/plugins/boole.lua diff --git a/configs/nvim/lua/max/plugins/colorizer.lua b/.config/nvim/lua/max/plugins/colorizer.lua similarity index 100% rename from configs/nvim/lua/max/plugins/colorizer.lua rename to .config/nvim/lua/max/plugins/colorizer.lua diff --git a/configs/nvim/lua/max/plugins/dadbod.lua b/.config/nvim/lua/max/plugins/dadbod.lua similarity index 100% rename from configs/nvim/lua/max/plugins/dadbod.lua rename to .config/nvim/lua/max/plugins/dadbod.lua diff --git a/configs/nvim/lua/max/plugins/dap.lua b/.config/nvim/lua/max/plugins/dap.lua similarity index 100% rename from configs/nvim/lua/max/plugins/dap.lua rename to .config/nvim/lua/max/plugins/dap.lua diff --git a/configs/nvim/lua/max/plugins/dashboard.lua b/.config/nvim/lua/max/plugins/dashboard.lua similarity index 100% rename from configs/nvim/lua/max/plugins/dashboard.lua rename to .config/nvim/lua/max/plugins/dashboard.lua diff --git a/configs/nvim/lua/max/plugins/git-conflict.lua b/.config/nvim/lua/max/plugins/git-conflict.lua similarity index 100% rename from configs/nvim/lua/max/plugins/git-conflict.lua rename to .config/nvim/lua/max/plugins/git-conflict.lua diff --git a/configs/nvim/lua/max/plugins/git-signs.lua b/.config/nvim/lua/max/plugins/git-signs.lua similarity index 100% rename from configs/nvim/lua/max/plugins/git-signs.lua rename to .config/nvim/lua/max/plugins/git-signs.lua diff --git a/configs/nvim/lua/max/plugins/jump.lua b/.config/nvim/lua/max/plugins/jump.lua similarity index 100% rename from configs/nvim/lua/max/plugins/jump.lua rename to .config/nvim/lua/max/plugins/jump.lua diff --git a/configs/nvim/lua/max/plugins/lsp.lua b/.config/nvim/lua/max/plugins/lsp.lua similarity index 99% rename from configs/nvim/lua/max/plugins/lsp.lua rename to .config/nvim/lua/max/plugins/lsp.lua index 39befac..f8111c5 100644 --- a/configs/nvim/lua/max/plugins/lsp.lua +++ b/.config/nvim/lua/max/plugins/lsp.lua @@ -65,6 +65,7 @@ return { -- dynamicRegistration = false, -- lineFoldingOnly = true, -- } + -- capabilities.textDocument.completion.completionItem.snippetSupport = true local custom_lsp = {} diff --git a/configs/nvim/lua/max/plugins/lsp/glsl.lua b/.config/nvim/lua/max/plugins/lsp/glsl.lua similarity index 100% rename from configs/nvim/lua/max/plugins/lsp/glsl.lua rename to .config/nvim/lua/max/plugins/lsp/glsl.lua diff --git a/configs/nvim/lua/max/plugins/lspsage.lua b/.config/nvim/lua/max/plugins/lspsage.lua similarity index 100% rename from configs/nvim/lua/max/plugins/lspsage.lua rename to .config/nvim/lua/max/plugins/lspsage.lua diff --git a/configs/nvim/lua/max/plugins/lualine.lua b/.config/nvim/lua/max/plugins/lualine.lua similarity index 96% rename from configs/nvim/lua/max/plugins/lualine.lua rename to .config/nvim/lua/max/plugins/lualine.lua index 9b13cdd..ae0b5ef 100644 --- a/configs/nvim/lua/max/plugins/lualine.lua +++ b/.config/nvim/lua/max/plugins/lualine.lua @@ -53,7 +53,7 @@ return { component_separators = "", section_separators = "", globalstatus = true, - theme = require("max.plugins.theme").name, + -- theme = require("max.plugins.theme").name, }, -- These are to remove the defaults sections = { @@ -131,8 +131,8 @@ return { shorting_target = 100, -- Shortens path to leave 40 spaces in the window -- for other components. (terrible name, any suggestions?) symbols = { - modified = "  ", -- Text to show when the file is modified. - readonly = " ", -- Text to show when the file is non-modifiable or readonly. + modified = "  ", -- Text to show when the file is modified. + readonly = " ", -- Text to show when the file is non-modifiable or readonly. unnamed = "[No Name]", -- Text to show for unnamed buffers. }, }) diff --git a/configs/nvim/lua/max/plugins/mini.lua b/.config/nvim/lua/max/plugins/mini.lua similarity index 100% rename from configs/nvim/lua/max/plugins/mini.lua rename to .config/nvim/lua/max/plugins/mini.lua diff --git a/configs/nvim/lua/max/plugins/neoai.lua b/.config/nvim/lua/max/plugins/neoai.lua similarity index 100% rename from configs/nvim/lua/max/plugins/neoai.lua rename to .config/nvim/lua/max/plugins/neoai.lua diff --git a/configs/nvim/lua/max/plugins/neotest.lua b/.config/nvim/lua/max/plugins/neotest.lua similarity index 87% rename from configs/nvim/lua/max/plugins/neotest.lua rename to .config/nvim/lua/max/plugins/neotest.lua index d04dff7..293f6c5 100644 --- a/configs/nvim/lua/max/plugins/neotest.lua +++ b/.config/nvim/lua/max/plugins/neotest.lua @@ -11,6 +11,5 @@ return { dependencies = { "haydenmeade/neotest-jest", "KaiSpencer/neotest-vitest", - "antoinemadec/FixCursorHold.nvim", }, } diff --git a/configs/nvim/lua/max/plugins/neotree.lua b/.config/nvim/lua/max/plugins/neotree.lua similarity index 100% rename from configs/nvim/lua/max/plugins/neotree.lua rename to .config/nvim/lua/max/plugins/neotree.lua diff --git a/configs/nvim/lua/max/plugins/noice.lua b/.config/nvim/lua/max/plugins/noice.lua similarity index 100% rename from configs/nvim/lua/max/plugins/noice.lua rename to .config/nvim/lua/max/plugins/noice.lua diff --git a/configs/nvim/lua/max/plugins/notify.lua b/.config/nvim/lua/max/plugins/notify.lua similarity index 100% rename from configs/nvim/lua/max/plugins/notify.lua rename to .config/nvim/lua/max/plugins/notify.lua diff --git a/configs/nvim/lua/max/plugins/oil.lua b/.config/nvim/lua/max/plugins/oil.lua similarity index 100% rename from configs/nvim/lua/max/plugins/oil.lua rename to .config/nvim/lua/max/plugins/oil.lua diff --git a/configs/nvim/lua/max/plugins/recorder.lua b/.config/nvim/lua/max/plugins/recorder.lua similarity index 100% rename from configs/nvim/lua/max/plugins/recorder.lua rename to .config/nvim/lua/max/plugins/recorder.lua diff --git a/configs/nvim/lua/max/plugins/rest.lua b/.config/nvim/lua/max/plugins/rest.lua similarity index 100% rename from configs/nvim/lua/max/plugins/rest.lua rename to .config/nvim/lua/max/plugins/rest.lua diff --git a/configs/nvim/lua/max/plugins/scrollbar.lua b/.config/nvim/lua/max/plugins/scrollbar.lua similarity index 100% rename from configs/nvim/lua/max/plugins/scrollbar.lua rename to .config/nvim/lua/max/plugins/scrollbar.lua diff --git a/configs/nvim/lua/max/plugins/session.lua b/.config/nvim/lua/max/plugins/session.lua similarity index 100% rename from configs/nvim/lua/max/plugins/session.lua rename to .config/nvim/lua/max/plugins/session.lua diff --git a/configs/nvim/lua/max/plugins/sniprun.lua b/.config/nvim/lua/max/plugins/sniprun.lua similarity index 100% rename from configs/nvim/lua/max/plugins/sniprun.lua rename to .config/nvim/lua/max/plugins/sniprun.lua diff --git a/configs/nvim/lua/max/plugins/statuscolumn.lua b/.config/nvim/lua/max/plugins/statuscolumn.lua similarity index 100% rename from configs/nvim/lua/max/plugins/statuscolumn.lua rename to .config/nvim/lua/max/plugins/statuscolumn.lua diff --git a/configs/nvim/lua/max/plugins/sudoku.lua b/.config/nvim/lua/max/plugins/sudoku.lua similarity index 100% rename from configs/nvim/lua/max/plugins/sudoku.lua rename to .config/nvim/lua/max/plugins/sudoku.lua diff --git a/configs/nvim/lua/max/plugins/tabs.lua b/.config/nvim/lua/max/plugins/tabs.lua similarity index 100% rename from configs/nvim/lua/max/plugins/tabs.lua rename to .config/nvim/lua/max/plugins/tabs.lua diff --git a/configs/nvim/lua/max/plugins/telescope.lua b/.config/nvim/lua/max/plugins/telescope.lua similarity index 100% rename from configs/nvim/lua/max/plugins/telescope.lua rename to .config/nvim/lua/max/plugins/telescope.lua diff --git a/configs/nvim/lua/max/plugins/theme.lua b/.config/nvim/lua/max/plugins/theme.lua similarity index 100% rename from configs/nvim/lua/max/plugins/theme.lua rename to .config/nvim/lua/max/plugins/theme.lua diff --git a/configs/nvim/lua/max/plugins/theme/ayu.lua b/.config/nvim/lua/max/plugins/theme/ayu.lua similarity index 100% rename from configs/nvim/lua/max/plugins/theme/ayu.lua rename to .config/nvim/lua/max/plugins/theme/ayu.lua diff --git a/configs/nvim/lua/max/plugins/theme/catpuccin.lua b/.config/nvim/lua/max/plugins/theme/catpuccin.lua similarity index 100% rename from configs/nvim/lua/max/plugins/theme/catpuccin.lua rename to .config/nvim/lua/max/plugins/theme/catpuccin.lua diff --git a/configs/nvim/lua/max/plugins/theme/everblush.lua b/.config/nvim/lua/max/plugins/theme/everblush.lua similarity index 100% rename from configs/nvim/lua/max/plugins/theme/everblush.lua rename to .config/nvim/lua/max/plugins/theme/everblush.lua diff --git a/.config/nvim/lua/max/plugins/theme/flexoki.lua b/.config/nvim/lua/max/plugins/theme/flexoki.lua new file mode 100644 index 0000000..68e3d44 --- /dev/null +++ b/.config/nvim/lua/max/plugins/theme/flexoki.lua @@ -0,0 +1,4 @@ +return { + 'stevedylandev/flexoki-nvim', + name = 'flexoki' +} diff --git a/configs/nvim/lua/max/plugins/theme/tokyo.lua b/.config/nvim/lua/max/plugins/theme/tokyo.lua similarity index 100% rename from configs/nvim/lua/max/plugins/theme/tokyo.lua rename to .config/nvim/lua/max/plugins/theme/tokyo.lua diff --git a/configs/nvim/lua/max/plugins/theme/tundra.lua b/.config/nvim/lua/max/plugins/theme/tundra.lua similarity index 100% rename from configs/nvim/lua/max/plugins/theme/tundra.lua rename to .config/nvim/lua/max/plugins/theme/tundra.lua diff --git a/configs/nvim/lua/max/plugins/todo-comments.lua b/.config/nvim/lua/max/plugins/todo-comments.lua similarity index 100% rename from configs/nvim/lua/max/plugins/todo-comments.lua rename to .config/nvim/lua/max/plugins/todo-comments.lua diff --git a/configs/nvim/lua/max/plugins/toggleterm.lua b/.config/nvim/lua/max/plugins/toggleterm.lua similarity index 100% rename from configs/nvim/lua/max/plugins/toggleterm.lua rename to .config/nvim/lua/max/plugins/toggleterm.lua diff --git a/configs/nvim/lua/max/plugins/translate.lua b/.config/nvim/lua/max/plugins/translate.lua similarity index 100% rename from configs/nvim/lua/max/plugins/translate.lua rename to .config/nvim/lua/max/plugins/translate.lua diff --git a/configs/nvim/lua/max/plugins/treesitter.lua b/.config/nvim/lua/max/plugins/treesitter.lua similarity index 100% rename from configs/nvim/lua/max/plugins/treesitter.lua rename to .config/nvim/lua/max/plugins/treesitter.lua diff --git a/configs/nvim/lua/max/plugins/trouble.lua b/.config/nvim/lua/max/plugins/trouble.lua similarity index 100% rename from configs/nvim/lua/max/plugins/trouble.lua rename to .config/nvim/lua/max/plugins/trouble.lua diff --git a/configs/nvim/lua/max/plugins/typescript.lua b/.config/nvim/lua/max/plugins/typescript.lua similarity index 90% rename from configs/nvim/lua/max/plugins/typescript.lua rename to .config/nvim/lua/max/plugins/typescript.lua index 0a97a1c..ca468ae 100644 --- a/configs/nvim/lua/max/plugins/typescript.lua +++ b/.config/nvim/lua/max/plugins/typescript.lua @@ -1,7 +1,6 @@ return { "pmizio/typescript-tools.nvim", ft = { "typescript", "typescriptreact" }, - enabled = false, dependencies = { "nvim-lua/plenary.nvim", "neovim/nvim-lspconfig" }, opts = {}, } diff --git a/configs/nvim/lua/max/plugins/undotree.lua b/.config/nvim/lua/max/plugins/undotree.lua similarity index 100% rename from configs/nvim/lua/max/plugins/undotree.lua rename to .config/nvim/lua/max/plugins/undotree.lua diff --git a/configs/nvim/lua/max/plugins/which-key.lua b/.config/nvim/lua/max/plugins/which-key.lua similarity index 100% rename from configs/nvim/lua/max/plugins/which-key.lua rename to .config/nvim/lua/max/plugins/which-key.lua diff --git a/configs/nvim/stylua.toml b/.config/nvim/stylua.toml similarity index 100% rename from configs/nvim/stylua.toml rename to .config/nvim/stylua.toml diff --git a/configs/rofi/config.rasi b/.config/rofi/config.rasi similarity index 100% rename from configs/rofi/config.rasi rename to .config/rofi/config.rasi diff --git a/configs/rofi/slate.rasi b/.config/rofi/slate.rasi similarity index 100% rename from configs/rofi/slate.rasi rename to .config/rofi/slate.rasi diff --git a/configs/sway/config b/.config/sway/config similarity index 100% rename from configs/sway/config rename to .config/sway/config diff --git a/configs/sway/scripts/create-floating b/.config/sway/scripts/create-floating similarity index 100% rename from configs/sway/scripts/create-floating rename to .config/sway/scripts/create-floating diff --git a/configs/sway/scripts/debug-window b/.config/sway/scripts/debug-window similarity index 100% rename from configs/sway/scripts/debug-window rename to .config/sway/scripts/debug-window diff --git a/configs/sway/scripts/grimshot b/.config/sway/scripts/grimshot similarity index 100% rename from configs/sway/scripts/grimshot rename to .config/sway/scripts/grimshot diff --git a/configs/sway/scripts/lock-screen b/.config/sway/scripts/lock-screen similarity index 100% rename from configs/sway/scripts/lock-screen rename to .config/sway/scripts/lock-screen diff --git a/configs/sway/scripts/nohup.out b/.config/sway/scripts/nohup.out similarity index 100% rename from configs/sway/scripts/nohup.out rename to .config/sway/scripts/nohup.out diff --git a/configs/sway/scripts/select-window b/.config/sway/scripts/select-window similarity index 100% rename from configs/sway/scripts/select-window rename to .config/sway/scripts/select-window diff --git a/configs/sway/scripts/toggle-bar b/.config/sway/scripts/toggle-bar similarity index 100% rename from configs/sway/scripts/toggle-bar rename to .config/sway/scripts/toggle-bar diff --git a/configs/sway/scripts/toggle-gaps b/.config/sway/scripts/toggle-gaps similarity index 100% rename from configs/sway/scripts/toggle-gaps rename to .config/sway/scripts/toggle-gaps diff --git a/configs/sway/scripts/toggle-layout b/.config/sway/scripts/toggle-layout similarity index 100% rename from configs/sway/scripts/toggle-layout rename to .config/sway/scripts/toggle-layout diff --git a/configs/sway/scripts/wl-present b/.config/sway/scripts/wl-present similarity index 100% rename from configs/sway/scripts/wl-present rename to .config/sway/scripts/wl-present diff --git a/configs/waybar/.gitignore b/.config/waybar/.gitignore similarity index 100% rename from configs/waybar/.gitignore rename to .config/waybar/.gitignore diff --git a/configs/waybar/config b/.config/waybar/config similarity index 100% rename from configs/waybar/config rename to .config/waybar/config diff --git a/configs/waybar/scripts/nohup.out b/.config/waybar/scripts/nohup.out similarity index 100% rename from configs/waybar/scripts/nohup.out rename to .config/waybar/scripts/nohup.out diff --git a/configs/waybar/scripts/power-consumption b/.config/waybar/scripts/power-consumption similarity index 100% rename from configs/waybar/scripts/power-consumption rename to .config/waybar/scripts/power-consumption diff --git a/configs/waybar/scripts/power-profile b/.config/waybar/scripts/power-profile similarity index 100% rename from configs/waybar/scripts/power-profile rename to .config/waybar/scripts/power-profile diff --git a/configs/waybar/scripts/set-theme b/.config/waybar/scripts/set-theme similarity index 100% rename from configs/waybar/scripts/set-theme rename to .config/waybar/scripts/set-theme diff --git a/configs/waybar/scripts/toggle-hdpi b/.config/waybar/scripts/toggle-hdpi similarity index 100% rename from configs/waybar/scripts/toggle-hdpi rename to .config/waybar/scripts/toggle-hdpi diff --git a/configs/waybar/scripts/toggle-theme b/.config/waybar/scripts/toggle-theme similarity index 100% rename from configs/waybar/scripts/toggle-theme rename to .config/waybar/scripts/toggle-theme diff --git a/configs/waybar/style.css b/.config/waybar/style.css similarity index 100% rename from configs/waybar/style.css rename to .config/waybar/style.css diff --git a/configs/wezterm/colors.lua b/.config/wezterm/colors.lua similarity index 100% rename from configs/wezterm/colors.lua rename to .config/wezterm/colors.lua diff --git a/configs/wezterm/utils.lua b/.config/wezterm/utils.lua similarity index 100% rename from configs/wezterm/utils.lua rename to .config/wezterm/utils.lua diff --git a/configs/wezterm/wezterm.lua b/.config/wezterm/wezterm.lua similarity index 100% rename from configs/wezterm/wezterm.lua rename to .config/wezterm/wezterm.lua diff --git a/configs/wofi/config b/.config/wofi/config similarity index 100% rename from configs/wofi/config rename to .config/wofi/config diff --git a/configs/wofi/scripts/open-localhost b/.config/wofi/scripts/open-localhost similarity index 100% rename from configs/wofi/scripts/open-localhost rename to .config/wofi/scripts/open-localhost diff --git a/configs/wofi/scripts/open-project b/.config/wofi/scripts/open-project similarity index 100% rename from configs/wofi/scripts/open-project rename to .config/wofi/scripts/open-project diff --git a/configs/wofi/scripts/power-menu b/.config/wofi/scripts/power-menu similarity index 100% rename from configs/wofi/scripts/power-menu rename to .config/wofi/scripts/power-menu diff --git a/configs/wofi/scripts/select-emoji b/.config/wofi/scripts/select-emoji similarity index 100% rename from configs/wofi/scripts/select-emoji rename to .config/wofi/scripts/select-emoji diff --git a/configs/wofi/scripts/select-vpn b/.config/wofi/scripts/select-vpn similarity index 100% rename from configs/wofi/scripts/select-vpn rename to .config/wofi/scripts/select-vpn diff --git a/configs/wofi/scripts/select-wifi b/.config/wofi/scripts/select-wifi similarity index 100% rename from configs/wofi/scripts/select-wifi rename to .config/wofi/scripts/select-wifi diff --git a/configs/wofi/scripts/web-search b/.config/wofi/scripts/web-search similarity index 100% rename from configs/wofi/scripts/web-search rename to .config/wofi/scripts/web-search diff --git a/configs/wofi/style.css b/.config/wofi/style.css similarity index 100% rename from configs/wofi/style.css rename to .config/wofi/style.css diff --git a/configs/zathura/zathurarc b/.config/zathura/zathurarc similarity index 100% rename from configs/zathura/zathurarc rename to .config/zathura/zathurarc diff --git a/configs/zsh/antigen.zsh b/.config/zsh/antigen.zsh similarity index 100% rename from configs/zsh/antigen.zsh rename to .config/zsh/antigen.zsh diff --git a/configs/zsh/functions.zsh b/.config/zsh/functions.zsh similarity index 100% rename from configs/zsh/functions.zsh rename to .config/zsh/functions.zsh diff --git a/configs/zsh/functions/cht.zsh b/.config/zsh/functions/cht.zsh similarity index 100% rename from configs/zsh/functions/cht.zsh rename to .config/zsh/functions/cht.zsh diff --git a/configs/zsh/functions/co.zsh b/.config/zsh/functions/co.zsh similarity index 100% rename from configs/zsh/functions/co.zsh rename to .config/zsh/functions/co.zsh diff --git a/configs/zsh/functions/conf.zsh b/.config/zsh/functions/conf.zsh similarity index 100% rename from configs/zsh/functions/conf.zsh rename to .config/zsh/functions/conf.zsh diff --git a/configs/zsh/functions/dv.zsh b/.config/zsh/functions/dv.zsh similarity index 100% rename from configs/zsh/functions/dv.zsh rename to .config/zsh/functions/dv.zsh diff --git a/configs/zsh/functions/fp.zsh b/.config/zsh/functions/fp.zsh similarity index 100% rename from configs/zsh/functions/fp.zsh rename to .config/zsh/functions/fp.zsh diff --git a/configs/zsh/functions/fx.zsh b/.config/zsh/functions/fx.zsh similarity index 100% rename from configs/zsh/functions/fx.zsh rename to .config/zsh/functions/fx.zsh diff --git a/configs/zsh/functions/mv-safe.zsh b/.config/zsh/functions/mv-safe.zsh similarity index 100% rename from configs/zsh/functions/mv-safe.zsh rename to .config/zsh/functions/mv-safe.zsh diff --git a/configs/zsh/functions/myip.zsh b/.config/zsh/functions/myip.zsh similarity index 100% rename from configs/zsh/functions/myip.zsh rename to .config/zsh/functions/myip.zsh diff --git a/configs/zsh/functions/note.zsh b/.config/zsh/functions/note.zsh similarity index 100% rename from configs/zsh/functions/note.zsh rename to .config/zsh/functions/note.zsh diff --git a/configs/zsh/functions/rn.zsh b/.config/zsh/functions/rn.zsh similarity index 100% rename from configs/zsh/functions/rn.zsh rename to .config/zsh/functions/rn.zsh diff --git a/configs/zsh/functions/run.zsh b/.config/zsh/functions/run.zsh similarity index 100% rename from configs/zsh/functions/run.zsh rename to .config/zsh/functions/run.zsh diff --git a/configs/zsh/functions/ssh_selector.zsh b/.config/zsh/functions/ssh_selector.zsh similarity index 100% rename from configs/zsh/functions/ssh_selector.zsh rename to .config/zsh/functions/ssh_selector.zsh diff --git a/configs/zsh/functions/start.zsh b/.config/zsh/functions/start.zsh similarity index 100% rename from configs/zsh/functions/start.zsh rename to .config/zsh/functions/start.zsh diff --git a/configs/zsh/functions/sum.zsh b/.config/zsh/functions/sum.zsh similarity index 100% rename from configs/zsh/functions/sum.zsh rename to .config/zsh/functions/sum.zsh diff --git a/configs/zsh/functions/wp.zsh b/.config/zsh/functions/wp.zsh similarity index 100% rename from configs/zsh/functions/wp.zsh rename to .config/zsh/functions/wp.zsh diff --git a/configs/zsh/update-repo.zsh b/.config/zsh/update-repo.zsh similarity index 100% rename from configs/zsh/update-repo.zsh rename to .config/zsh/update-repo.zsh diff --git a/configs/zsh/wezterm.sh b/.config/zsh/wezterm.sh similarity index 100% rename from configs/zsh/wezterm.sh rename to .config/zsh/wezterm.sh diff --git a/configs/.dircolors b/.dircolors similarity index 100% rename from configs/.dircolors rename to .dircolors diff --git a/.luarc.json b/.dotfiles/.luarc.json similarity index 100% rename from .luarc.json rename to .dotfiles/.luarc.json diff --git a/Dockerfile b/.dotfiles/Dockerfile similarity index 100% rename from Dockerfile rename to .dotfiles/Dockerfile diff --git a/completions/_arduino-cli b/.dotfiles/completions/_arduino-cli similarity index 100% rename from completions/_arduino-cli rename to .dotfiles/completions/_arduino-cli diff --git a/completions/_fx b/.dotfiles/completions/_fx similarity index 100% rename from completions/_fx rename to .dotfiles/completions/_fx diff --git a/completions/init.zsh b/.dotfiles/completions/init.zsh similarity index 100% rename from completions/init.zsh rename to .dotfiles/completions/init.zsh diff --git a/fonts/Fira Mono Bold Nerd Font Complete Mono.otf b/.dotfiles/fonts/Fira Mono Bold Nerd Font Complete Mono.otf similarity index 100% rename from fonts/Fira Mono Bold Nerd Font Complete Mono.otf rename to .dotfiles/fonts/Fira Mono Bold Nerd Font Complete Mono.otf diff --git a/fonts/Fira Mono Medium Nerd Font Complete Mono.otf b/.dotfiles/fonts/Fira Mono Medium Nerd Font Complete Mono.otf similarity index 100% rename from fonts/Fira Mono Medium Nerd Font Complete Mono.otf rename to .dotfiles/fonts/Fira Mono Medium Nerd Font Complete Mono.otf diff --git a/fonts/Fira Mono Regular Nerd Font Complete Mono.otf b/.dotfiles/fonts/Fira Mono Regular Nerd Font Complete Mono.otf similarity index 100% rename from fonts/Fira Mono Regular Nerd Font Complete Mono.otf rename to .dotfiles/fonts/Fira Mono Regular Nerd Font Complete Mono.otf diff --git a/helpers/asdf-install.sh b/.dotfiles/helpers/asdf-install.sh similarity index 100% rename from helpers/asdf-install.sh rename to .dotfiles/helpers/asdf-install.sh diff --git a/helpers/installer.sh b/.dotfiles/helpers/installer.sh similarity index 100% rename from helpers/installer.sh rename to .dotfiles/helpers/installer.sh diff --git a/helpers/linker.sh b/.dotfiles/helpers/linker.sh similarity index 100% rename from helpers/linker.sh rename to .dotfiles/helpers/linker.sh diff --git a/helpers/multiselect.sh b/.dotfiles/helpers/multiselect.sh similarity index 100% rename from helpers/multiselect.sh rename to .dotfiles/helpers/multiselect.sh diff --git a/helpers/prompt.sh b/.dotfiles/helpers/prompt.sh similarity index 100% rename from helpers/prompt.sh rename to .dotfiles/helpers/prompt.sh diff --git a/.dotfiles/helpers/spinner.sh b/.dotfiles/helpers/spinner.sh new file mode 100644 index 0000000..e69de29 diff --git a/install/install-asdf.sh b/.dotfiles/install/install-asdf.sh similarity index 100% rename from install/install-asdf.sh rename to .dotfiles/install/install-asdf.sh diff --git a/install/install-nvim.sh b/.dotfiles/install/install-nvim.sh similarity index 100% rename from install/install-nvim.sh rename to .dotfiles/install/install-nvim.sh diff --git a/install/oh-my-zsh.sh b/.dotfiles/install/oh-my-zsh.sh similarity index 100% rename from install/oh-my-zsh.sh rename to .dotfiles/install/oh-my-zsh.sh diff --git a/install/p10k.sh b/.dotfiles/install/p10k.sh similarity index 100% rename from install/p10k.sh rename to .dotfiles/install/p10k.sh diff --git a/install/zsh-autosuggestions.sh b/.dotfiles/install/zsh-autosuggestions.sh similarity index 100% rename from install/zsh-autosuggestions.sh rename to .dotfiles/install/zsh-autosuggestions.sh diff --git a/setup.sh b/.dotfiles/setup.sh similarity index 100% rename from setup.sh rename to .dotfiles/setup.sh diff --git a/.gitconfig b/.gitconfig new file mode 100644 index 0000000..0e68f76 --- /dev/null +++ b/.gitconfig @@ -0,0 +1,15 @@ +[user] + name = Max Richter + email = jim-x@web.de + +[init] + defaultBranch = main + +[push] + autoSetupRemote = true + +[filter "lfs"] + clean = git-lfs clean -- %f + smudge = git-lfs smudge -- %f + process = git-lfs filter-process + required = true diff --git a/.gitignore b/.gitignore index ef62189..72e8ffc 100644 --- a/.gitignore +++ b/.gitignore @@ -1 +1 @@ -.pnpm-debug.log +* diff --git a/configs/.p10k.zsh b/.p10k.zsh similarity index 100% rename from configs/.p10k.zsh rename to .p10k.zsh diff --git a/configs/zsh/aliases.sh b/.profile similarity index 69% rename from configs/zsh/aliases.sh rename to .profile index 2be1057..ca8f168 100644 --- a/configs/zsh/aliases.sh +++ b/.profile @@ -1,4 +1,31 @@ -## ALIASIES ## +# ~/.profile: executed by the command interpreter for login shells. +# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login +# exists. +# see /usr/share/doc/bash/examples/startup-files for examples. +# the files are located in the bash-doc package. + +# the default umask is set in /etc/profile; for setting the umask +# for ssh logins, install and configure the libpam-umask package. +#umask 022 + +# if running bash +if [ -n "$BASH_VERSION" ]; then + # include .bashrc if it exists + if [ -f "$HOME/.bashrc" ]; then + . "$HOME/.bashrc" + fi +fi + +# set PATH so it includes user's private bin if it exists +if [ -d "$HOME/bin" ] ; then + PATH="$HOME/bin:$PATH" +fi + +# set PATH so it includes user's private bin if it exists +if [ -d "$HOME/.local/bin" ] ; then + PATH="$HOME/.local/bin:$PATH" +fi + # This function emits an OSC 1337 sequence to set a user var # associated with the current terminal pane. diff --git a/.ssh/config b/.ssh/config new file mode 100644 index 0000000..10a1794 --- /dev/null +++ b/.ssh/config @@ -0,0 +1,59 @@ +Host c.h.main + HostName 78.47.148.93 + Port 2222 + User root + +Host c.d.main + HostName 67.205.144.75 + User root + +Host c.h.odm + HostName 168.119.225.237 + User root + +Host c.h.apps + User root + HostName 167.235.31.193 + Port 22 + +Host c.h.minecraft + HostName 195.201.132.215 + User root + RequestTTY true + RemoteCommand tmux new -A -s ssh + +Host c.h.mc + HostName 116.203.90.147 + User root + +Host c.d.main + Hostname 143.198.161.36 + User root + +Host l.pi-01 + HostName l-p-01 + User jim + RequestTTY true + RemoteCommand tmux new -A -s ssh + +Host git.max-richter.dev + HostName 192.168.178.56 + User git + Port 2222 + +Host l.macmachine + User max + HostName 192.168.178.56 + +Host c.o.main + HostName 129.158.60.238 + User opc + +Host l.pi-02 + HostName 192.168.0.157 + User root + +Host c.a.plant-api + User admin + Hostname plant-api.jim-fx.com + IdentityFile ~/.ssh/first-key.pem diff --git a/configs/.tmux.conf b/.tmux.conf similarity index 100% rename from configs/.tmux.conf rename to .tmux.conf diff --git a/.tool-versions b/.tool-versions new file mode 100644 index 0000000..85da0d6 --- /dev/null +++ b/.tool-versions @@ -0,0 +1,9 @@ +neovim 0.9.2 +zig 0.10.1 +deno 1.37.1 +nodejs 20.5.0 +pnpm 7.33.5 +golang 1.20.6 +hugo 0.117.0 +rust 1.72.0 +bun 1.0.1 diff --git a/configs/.zshrc b/.zshrc similarity index 97% rename from configs/.zshrc rename to .zshrc index e00a709..543091f 100644 --- a/configs/.zshrc +++ b/.zshrc @@ -68,10 +68,7 @@ export ZSH=~/.oh-my-zsh source $ZSH/oh-my-zsh.sh ## FUNCTIONS ## -source $HOME/.dotfiles/configs/zsh/functions.zsh - -## ALIASES ## -source $HOME/.dotfiles/configs/zsh/aliases.sh +source $HOME/.configs/zsh/functions.zsh ## WEZTERM INTEGRATIONS ## source $HOME/.dotfiles/configs/zsh/wezterm.sh diff --git a/configs/.gitignore b/configs/.gitignore deleted file mode 100644 index f717976..0000000 --- a/configs/.gitignore +++ /dev/null @@ -1 +0,0 @@ -.gitconfig* diff --git a/configs/alacritty/alacritty.yml b/configs/alacritty/alacritty.yml deleted file mode 100644 index 4833a53..0000000 --- a/configs/alacritty/alacritty.yml +++ /dev/null @@ -1,811 +0,0 @@ -#env: - #TERM: alacritty - #dimensions: - # columns: 0 - # lines: 0 - #position: - # x: 0 - # y: 0 -window: - padding: - x: 10 - y: 10 - dynamic_padding: false - - # Window decorations - # - # Values for `decorations`: - # - full: Borders and title bar - # - none: Neither borders nor title bar - # - # Values for `decorations` (macOS only): - # - transparent: Title bar, transparent background and title bar buttons - # - buttonless: Title bar, transparent background and no title bar buttons - decorations: none - - # Startup Mode (changes require restart) - # - # Values for `startup_mode`: - # - Windowed - # - Maximized - # - Fullscreen - # - # Values for `startup_mode` (macOS only): - # - SimpleFullscreen - #startup_mode: Windowed - - # Window title - #title: Alacritty - - # Allow terminal applications to change Alacritty's window title. - dynamic_title: true - - # Window class (Linux/BSD only): - #class: - # Application instance name - #instance: Alacritty - # General application class - #general: Alacritty - - # GTK theme variant (Linux/BSD only) - # - # Override the variant of the GTK theme. Commonly supported values are `dark` - # and `light`. Set this to `None` to use the default theme variant. - #gtk_theme_variant: None - -#scrolling: - # Maximum number of lines in the scrollback buffer. - # Specifying '0' will disable scrolling. - #history: 10000 - - # Scrolling distance multiplier. - #multiplier: 3 - -# Font configuration -font: - # Normal (roman) font face - normal: - # Font family - # - # Default: - # - (macOS) Menlo - # - (Linux/BSD) monospace - # - (Windows) Consolas - family: FiraMono Nerd Font - - # The `style` can be specified to pick a specific face. - #style: Regular - - # Bold font face - #bold: - # Font family - # - # If the bold family is not specified, it will fall back to the - # value specified for the normal font. - #family: monospace - - # The `style` can be specified to pick a specific face. - #style: Bold - - # Italic font face - #italic: - # Font family - # - # If the italic family is not specified, it will fall back to the - # value specified for the normal font. - #family: monospace - - # The `style` can be specified to pick a specific face. - #style: Italic - - # Bold italic font face - #bold_italic: - # Font family - # - # If the bold italic family is not specified, it will fall back to the - # value specified for the normal font. - #family: monospace - - # The `style` can be specified to pick a specific face. - #style: Bold Italic - - # Point size - size: 13.0 - - # Offset is the extra space around each character. `offset.y` can be thought - # of as modifying the line spacing, and `offset.x` as modifying the letter - # spacing. - #offset: - # x: 0 - # y: 0 - - # Glyph offset determines the locations of the glyphs within their cells with - # the default being at the bottom. Increasing `x` moves the glyph to the - # right, increasing `y` moves the glyph upward. - #glyph_offset: - # x: 0 - # y: 0 - - # Thin stroke font rendering (macOS only) - # - # Thin strokes are suitable for retina displays, but for non-retina screens - # it is recommended to set `use_thin_strokes` to `false`. - #use_thin_strokes: true - -# If `true`, bold text is drawn using the bright color variants. -#draw_bold_text_with_bright_colors: false - -# Colors (Tomorrow Night) -colors: - primary: - background: '#000000' - foreground: '#c5c8c6' - - # Bright and dim foreground colors - # - # The dimmed foreground color is calculated automatically if it is not - # present. If the bright foreground color is not set, or - # `draw_bold_text_with_bright_colors` is `false`, the normal foreground - # color will be used. - #dim_foreground: '#828482' - #bright_foreground: '#eaeaea' - - # Cursor colors - # - # Colors which should be used to draw the terminal cursor. - # - # Allowed values are CellForeground/CellBackground, which reference the - # affected cell, or hexadecimal colors like #ff00ff. - #cursor: - # text: CellBackground - # cursor: CellForeground - - # Vi mode cursor colors - # - # Colors for the cursor when the vi mode is active. - # - # Allowed values are CellForeground/CellBackground, which reference the - # affected cell, or hexadecimal colors like #ff00ff. - vi_mode_cursor: - text: CellBackground - cursor: CellForeground - - # Search colors - # - # Colors used for the search bar and match highlighting. - #search: - # Allowed values are CellForeground/CellBackground, which reference the - # affected cell, or hexadecimal colors like #ff00ff. - #matches: - # foreground: '#000000' - # background: '#ffffff' - #focused_match: - # foreground: '#ffffff' - # background: '#000000' - - #bar: - # background: '#c5c8c6' - # foreground: '#1d1f21' - - # Keyboard regex hints - #hints: - # First character in the hint label - # - # Allowed values are CellForeground/CellBackground, which reference the - # affected cell, or hexadecimal colors like #ff00ff. - #start: - # foreground: '#1d1f21' - # background: '#e9ff5e' - - # All characters after the first one in the hint label - # - # Allowed values are CellForeground/CellBackground, which reference the - # affected cell, or hexadecimal colors like #ff00ff. - #end: - # foreground: '#e9ff5e' - # background: '#1d1f21' - - # Line indicator - # - # Color used for the indicator displaying the position in history during - # search and vi mode. - # - # By default, these will use the opposing primary color. - #line_indicator: - # foreground: None - # background: None - - # Selection colors - # - # Colors which should be used to draw the selection area. - # - # Allowed values are CellForeground/CellBackground, which reference the - # affected cell, or hexadecimal colors like #ff00ff. - #selection: - # text: CellBackground - # background: CellForeground - - # Normal colors - #normal: - # black: '#1d1f21' - # red: '#cc6666' - # green: '#b5bd68' - # yellow: '#f0c674' - # blue: '#81a2be' - # magenta: '#b294bb' - # cyan: '#8abeb7' - # white: '#c5c8c6' - - # Bright colors - #bright: - # black: '#666666' - # red: '#d54e53' - # green: '#b9ca4a' - # yellow: '#e7c547' - # blue: '#7aa6da' - # magenta: '#c397d8' - # cyan: '#70c0b1' - # white: '#eaeaea' - - # Dim colors - # - # If the dim colors are not set, they will be calculated automatically based - # on the `normal` colors. - #dim: - # black: '#131415' - # red: '#864343' - # green: '#777c44' - # yellow: '#9e824c' - # blue: '#556a7d' - # magenta: '#75617b' - # cyan: '#5b7d78' - # white: '#828482' - - # Indexed Colors - # - # The indexed colors include all colors from 16 to 256. - # When these are not set, they're filled with sensible defaults. - # - # Example: - # `- { index: 16, color: '#ff00ff' }` - # - #indexed_colors: [] - -# Bell -# -# The bell is rung every time the BEL control character is received. -#bell: - # Visual Bell Animation - # - # Animation effect for flashing the screen when the visual bell is rung. - # - # Values for `animation`: - # - Ease - # - EaseOut - # - EaseOutSine - # - EaseOutQuad - # - EaseOutCubic - # - EaseOutQuart - # - EaseOutQuint - # - EaseOutExpo - # - EaseOutCirc - # - Linear - #animation: EaseOutExpo - - # Duration of the visual bell flash in milliseconds. A `duration` of `0` will - # disable the visual bell animation. - #duration: 0 - - # Visual bell animation color. - #color: '#ffffff' - - # Bell Command - # - # This program is executed whenever the bell is rung. - # - # When set to `command: None`, no command will be executed. - # - # Example: - # command: - # program: notify-send - # args: ["Hello, World!"] - # - #command: None - -# Background opacity -# -# Window opacity as a floating point number from `0.0` to `1.0`. -# The value `0.0` is completely transparent and `1.0` is opaque. -#background_opacity: 1.0 - -#selection: - # This string contains all characters that are used as separators for - # "semantic words" in Alacritty. - #semantic_escape_chars: ",│`|:\"' ()[]{}<>\t" - - # When set to `true`, selected text will be copied to the primary clipboard. - #save_to_clipboard: false - -#cursor: - # Cursor style - #style: - # Cursor shape - # - # Values for `shape`: - # - ▇ Block - # - _ Underline - # - | Beam - #shape: Block - - # Cursor blinking state - # - # Values for `blinking`: - # - Never: Prevent the cursor from ever blinking - # - Off: Disable blinking by default - # - On: Enable blinking by default - # - Always: Force the cursor to always blink - #blinking: Off - - # Vi mode cursor style - # - # If the vi mode cursor style is `None` or not specified, it will fall back to - # the style of the active value of the normal cursor. - # - # See `cursor.style` for available options. - #vi_mode_style: None - - # Cursor blinking interval in milliseconds. - #blink_interval: 750 - - # If this is `true`, the cursor will be rendered as a hollow box when the - # window is not focused. - #unfocused_hollow: true - - # Thickness of the cursor relative to the cell width as floating point number - # from `0.0` to `1.0`. - #thickness: 0.15 - -# Live config reload (changes require restart) -#live_config_reload: true - -# Shell -# -# You can set `shell.program` to the path of your favorite shell, e.g. -# `/bin/fish`. Entries in `shell.args` are passed unmodified as arguments to the -# shell. -# -# Default: -# - (macOS) /bin/bash --login -# - (Linux/BSD) user login shell -# - (Windows) powershell -#shell: -# program: /bin/bash -# args: -# - --login - -# Startup directory -# -# Directory the shell is started in. If this is unset, or `None`, the working -# directory of the parent process will be used. -#working_directory: None - -# Send ESC (\x1b) before characters when alt is pressed. -alt_send_esc: true - -#mouse: - # Click settings - # - # The `double_click` and `triple_click` settings control the time - # alacritty should wait for accepting multiple clicks as one double - # or triple click. - #double_click: { threshold: 300 } - #triple_click: { threshold: 300 } - - # If this is `true`, the cursor is temporarily hidden when typing. - #hide_when_typing: false - -# Regex hints -# -# Terminal hints can be used to find text in the visible part of the terminal -# and pipe it to other applications. -#hints: - # Keys used for the hint labels. - #alphabet: "jfkdls;ahgurieowpq" - - # List with all available hints - # - # Each hint must have a `regex` and either an `action` or a `command` field. - # The fields `mouse`, `binding` and `post_processing` are optional. - # - # The fields `command`, `binding.key`, `binding.mods`, `binding.mode` and - # `mouse.mods` accept the same values as they do in the `key_bindings` section. - # - # The `mouse.enabled` field controls if the hint should be underlined while - # the mouse with all `mouse.mods` keys held or the vi mode cursor is above it. - # - # If the `post_processing` field is set to `true`, heuristics will be used to - # shorten the match if there are characters likely not to be part of the hint - # (e.g. a trailing `.`). This is most useful for URIs. - # - # Values for `action`: - # - Copy - # Copy the hint's text to the clipboard. - # - Paste - # Paste the hint's text to the terminal or search. - # - Select - # Select the hint's text. - # - MoveViModeCursor - # Move the vi mode cursor to the beginning of the hint. - #enabled: - # - regex: "(ipfs:|ipns:|magnet:|mailto:|gemini:|gopher:|https:|http:|news:|file:|git:|ssh:|ftp:)\ - # [^\u0000-\u001F\u007F-\u009F<>\"\\s{-}\\^⟨⟩`]+" - # command: xdg-open - # post_processing: true - # mouse: - # enabled: true - # mods: None - # binding: - # key: U - # mods: Control|Shift - -# Mouse bindings -# -# Mouse bindings are specified as a list of objects, much like the key -# bindings further below. -# -# To trigger mouse bindings when an application running within Alacritty -# captures the mouse, the `Shift` modifier is automatically added as a -# requirement. -# -# Each mouse binding will specify a: -# -# - `mouse`: -# -# - Middle -# - Left -# - Right -# - Numeric identifier such as `5` -# -# - `action` (see key bindings) -# -# And optionally: -# -# - `mods` (see key bindings) -#mouse_bindings: -# - { mouse: Middle, action: PasteSelection } - -# Key bindings -# -# Key bindings are specified as a list of objects. For example, this is the -# default paste binding: -# -# `- { key: V, mods: Control|Shift, action: Paste }` -# -# Each key binding will specify a: -# -# - `key`: Identifier of the key pressed -# -# - A-Z -# - F1-F24 -# - Key0-Key9 -# -# A full list with available key codes can be found here: -# https://docs.rs/glutin/*/glutin/event/enum.VirtualKeyCode.html#variants -# -# Instead of using the name of the keys, the `key` field also supports using -# the scancode of the desired key. Scancodes have to be specified as a -# decimal number. This command will allow you to display the hex scancodes -# for certain keys: -# -# `showkey --scancodes`. -# -# Then exactly one of: -# -# - `chars`: Send a byte sequence to the running application -# -# The `chars` field writes the specified string to the terminal. This makes -# it possible to pass escape sequences. To find escape codes for bindings -# like `PageUp` (`"\x1b[5~"`), you can run the command `showkey -a` outside -# of tmux. Note that applications use terminfo to map escape sequences back -# to keys. It is therefore required to update the terminfo when changing an -# escape sequence. -# -# - `action`: Execute a predefined action -# -# - ToggleViMode -# - SearchForward -# Start searching toward the right of the search origin. -# - SearchBackward -# Start searching toward the left of the search origin. -# - Copy -# - Paste -# - IncreaseFontSize -# - DecreaseFontSize -# - ResetFontSize -# - ScrollPageUp -# - ScrollPageDown -# - ScrollHalfPageUp -# - ScrollHalfPageDown -# - ScrollLineUp -# - ScrollLineDown -# - ScrollToTop -# - ScrollToBottom -# - ClearHistory -# Remove the terminal's scrollback history. -# - Hide -# Hide the Alacritty window. -# - Minimize -# Minimize the Alacritty window. -# - Quit -# Quit Alacritty. -# - ToggleFullscreen -# - SpawnNewInstance -# Spawn a new instance of Alacritty. -# - ClearLogNotice -# Clear Alacritty's UI warning and error notice. -# - ClearSelection -# Remove the active selection. -# - ReceiveChar -# - None -# -# - Vi mode exclusive actions: -# -# - Open -# Perform the action of the first matching hint under the vi mode cursor -# with `mouse.enabled` set to `true`. -# - ToggleNormalSelection -# - ToggleLineSelection -# - ToggleBlockSelection -# - ToggleSemanticSelection -# Toggle semantic selection based on `selection.semantic_escape_chars`. -# -# - Vi mode exclusive cursor motion actions: -# -# - Up -# One line up. -# - Down -# One line down. -# - Left -# One character left. -# - Right -# One character right. -# - First -# First column, or beginning of the line when already at the first column. -# - Last -# Last column, or beginning of the line when already at the last column. -# - FirstOccupied -# First non-empty cell in this terminal row, or first non-empty cell of -# the line when already at the first cell of the row. -# - High -# Top of the screen. -# - Middle -# Center of the screen. -# - Low -# Bottom of the screen. -# - SemanticLeft -# Start of the previous semantically separated word. -# - SemanticRight -# Start of the next semantically separated word. -# - SemanticLeftEnd -# End of the previous semantically separated word. -# - SemanticRightEnd -# End of the next semantically separated word. -# - WordLeft -# Start of the previous whitespace separated word. -# - WordRight -# Start of the next whitespace separated word. -# - WordLeftEnd -# End of the previous whitespace separated word. -# - WordRightEnd -# End of the next whitespace separated word. -# - Bracket -# Character matching the bracket at the cursor's location. -# - SearchNext -# Beginning of the next match. -# - SearchPrevious -# Beginning of the previous match. -# - SearchStart -# Start of the match to the left of the vi mode cursor. -# - SearchEnd -# End of the match to the right of the vi mode cursor. -# -# - Search mode exclusive actions: -# - SearchFocusNext -# Move the focus to the next search match. -# - SearchFocusPrevious -# Move the focus to the previous search match. -# - SearchConfirm -# - SearchCancel -# - SearchClear -# Reset the search regex. -# - SearchDeleteWord -# Delete the last word in the search regex. -# - SearchHistoryPrevious -# Go to the previous regex in the search history. -# - SearchHistoryNext -# Go to the next regex in the search history. -# -# - macOS exclusive actions: -# - ToggleSimpleFullscreen -# Enter fullscreen without occupying another space. -# -# - Linux/BSD exclusive actions: -# -# - CopySelection -# Copy from the selection buffer. -# - PasteSelection -# Paste from the selection buffer. -# -# - `command`: Fork and execute a specified command plus arguments -# -# The `command` field must be a map containing a `program` string and an -# `args` array of command line parameter strings. For example: -# `{ program: "alacritty", args: ["-e", "vttest"] }` -# -# And optionally: -# -# - `mods`: Key modifiers to filter binding actions -# -# - Command -# - Control -# - Option -# - Super -# - Shift -# - Alt -# -# Multiple `mods` can be combined using `|` like this: -# `mods: Control|Shift`. -# Whitespace and capitalization are relevant and must match the example. -# -# - `mode`: Indicate a binding for only specific terminal reported modes -# -# This is mainly used to send applications the correct escape sequences -# when in different modes. -# -# - AppCursor -# - AppKeypad -# - Search -# - Alt -# - Vi -# -# A `~` operator can be used before a mode to apply the binding whenever -# the mode is *not* active, e.g. `~Alt`. -# -# Bindings are always filled by default, but will be replaced when a new -# binding with the same triggers is defined. To unset a default binding, it can -# be mapped to the `ReceiveChar` action. Alternatively, you can use `None` for -# a no-op if you do not wish to receive input characters for that binding. -# -# If the same trigger is assigned to multiple actions, all of them are executed -# in the order they were defined in. -#key_bindings: - #- { key: Paste, action: Paste } - #- { key: Copy, action: Copy } - #- { key: L, mods: Control, action: ClearLogNotice } - #- { key: L, mods: Control, mode: ~Vi|~Search, chars: "\x0c" } - #- { key: PageUp, mods: Shift, mode: ~Alt, action: ScrollPageUp, } - #- { key: PageDown, mods: Shift, mode: ~Alt, action: ScrollPageDown } - #- { key: Home, mods: Shift, mode: ~Alt, action: ScrollToTop, } - #- { key: End, mods: Shift, mode: ~Alt, action: ScrollToBottom } - - # Vi Mode - #- { key: Space, mods: Shift|Control, mode: ~Search, action: ToggleViMode } - #- { key: Space, mods: Shift|Control, mode: Vi|~Search, action: ScrollToBottom } - #- { key: Escape, mode: Vi|~Search, action: ClearSelection } - #- { key: I, mode: Vi|~Search, action: ToggleViMode } - #- { key: I, mode: Vi|~Search, action: ScrollToBottom } - #- { key: C, mods: Control, mode: Vi|~Search, action: ToggleViMode } - #- { key: Y, mods: Control, mode: Vi|~Search, action: ScrollLineUp } - #- { key: E, mods: Control, mode: Vi|~Search, action: ScrollLineDown } - #- { key: G, mode: Vi|~Search, action: ScrollToTop } - #- { key: G, mods: Shift, mode: Vi|~Search, action: ScrollToBottom } - #- { key: B, mods: Control, mode: Vi|~Search, action: ScrollPageUp } - #- { key: F, mods: Control, mode: Vi|~Search, action: ScrollPageDown } - #- { key: U, mods: Control, mode: Vi|~Search, action: ScrollHalfPageUp } - #- { key: D, mods: Control, mode: Vi|~Search, action: ScrollHalfPageDown } - #- { key: Y, mode: Vi|~Search, action: Copy } - #- { key: Y, mode: Vi|~Search, action: ClearSelection } - #- { key: Copy, mode: Vi|~Search, action: ClearSelection } - #- { key: V, mode: Vi|~Search, action: ToggleNormalSelection } - #- { key: V, mods: Shift, mode: Vi|~Search, action: ToggleLineSelection } - #- { key: V, mods: Control, mode: Vi|~Search, action: ToggleBlockSelection } - #- { key: V, mods: Alt, mode: Vi|~Search, action: ToggleSemanticSelection } - #- { key: Return, mode: Vi|~Search, action: Open } - #- { key: K, mode: Vi|~Search, action: Up } - #- { key: J, mode: Vi|~Search, action: Down } - #- { key: H, mode: Vi|~Search, action: Left } - #- { key: L, mode: Vi|~Search, action: Right } - #- { key: Up, mode: Vi|~Search, action: Up } - #- { key: Down, mode: Vi|~Search, action: Down } - #- { key: Left, mode: Vi|~Search, action: Left } - #- { key: Right, mode: Vi|~Search, action: Right } - #- { key: Key0, mode: Vi|~Search, action: First } - #- { key: Key4, mods: Shift, mode: Vi|~Search, action: Last } - #- { key: Key6, mods: Shift, mode: Vi|~Search, action: FirstOccupied } - #- { key: H, mods: Shift, mode: Vi|~Search, action: High } - #- { key: M, mods: Shift, mode: Vi|~Search, action: Middle } - #- { key: L, mods: Shift, mode: Vi|~Search, action: Low } - #- { key: B, mode: Vi|~Search, action: SemanticLeft } - #- { key: W, mode: Vi|~Search, action: SemanticRight } - #- { key: E, mode: Vi|~Search, action: SemanticRightEnd } - #- { key: B, mods: Shift, mode: Vi|~Search, action: WordLeft } - #- { key: W, mods: Shift, mode: Vi|~Search, action: WordRight } - #- { key: E, mods: Shift, mode: Vi|~Search, action: WordRightEnd } - #- { key: Key5, mods: Shift, mode: Vi|~Search, action: Bracket } - #- { key: Slash, mode: Vi|~Search, action: SearchForward } - #- { key: Slash, mods: Shift, mode: Vi|~Search, action: SearchBackward } - #- { key: N, mode: Vi|~Search, action: SearchNext } - #- { key: N, mods: Shift, mode: Vi|~Search, action: SearchPrevious } - - # Search Mode - #- { key: Return, mode: Search|Vi, action: SearchConfirm } - #- { key: Escape, mode: Search, action: SearchCancel } - #- { key: C, mods: Control, mode: Search, action: SearchCancel } - #- { key: U, mods: Control, mode: Search, action: SearchClear } - #- { key: W, mods: Control, mode: Search, action: SearchDeleteWord } - #- { key: P, mods: Control, mode: Search, action: SearchHistoryPrevious } - #- { key: N, mods: Control, mode: Search, action: SearchHistoryNext } - #- { key: Up, mode: Search, action: SearchHistoryPrevious } - #- { key: Down, mode: Search, action: SearchHistoryNext } - #- { key: Return, mode: Search|~Vi, action: SearchFocusNext } - #- { key: Return, mods: Shift, mode: Search|~Vi, action: SearchFocusPrevious } - - # (Windows, Linux, and BSD only) - #- { key: V, mods: Control|Shift, mode: ~Vi, action: Paste } - #- { key: C, mods: Control|Shift, action: Copy } - #- { key: F, mods: Control|Shift, mode: ~Search, action: SearchForward } - #- { key: B, mods: Control|Shift, mode: ~Search, action: SearchBackward } - #- { key: C, mods: Control|Shift, mode: Vi|~Search, action: ClearSelection } - #- { key: Insert, mods: Shift, action: PasteSelection } - #- { key: Key0, mods: Control, action: ResetFontSize } - #- { key: Equals, mods: Control, action: IncreaseFontSize } - #- { key: Plus, mods: Control, action: IncreaseFontSize } - #- { key: NumpadAdd, mods: Control, action: IncreaseFontSize } - #- { key: Minus, mods: Control, action: DecreaseFontSize } - #- { key: NumpadSubtract, mods: Control, action: DecreaseFontSize } - - # (Windows only) - #- { key: Return, mods: Alt, action: ToggleFullscreen } - - # (macOS only) - #- { key: K, mods: Command, mode: ~Vi|~Search, chars: "\x0c" } - #- { key: K, mods: Command, mode: ~Vi|~Search, action: ClearHistory } - #- { key: Key0, mods: Command, action: ResetFontSize } - #- { key: Equals, mods: Command, action: IncreaseFontSize } - #- { key: Plus, mods: Command, action: IncreaseFontSize } - #- { key: NumpadAdd, mods: Command, action: IncreaseFontSize } - #- { key: Minus, mods: Command, action: DecreaseFontSize } - #- { key: NumpadSubtract, mods: Command, action: DecreaseFontSize } - #- { key: V, mods: Command, action: Paste } - #- { key: C, mods: Command, action: Copy } - #- { key: C, mods: Command, mode: Vi|~Search, action: ClearSelection } - #- { key: H, mods: Command, action: Hide } - #- { key: H, mods: Command|Alt, action: HideOtherApplications } - #- { key: M, mods: Command, action: Minimize } - #- { key: Q, mods: Command, action: Quit } - #- { key: W, mods: Command, action: Quit } - #- { key: N, mods: Command, action: SpawnNewInstance } - #- { key: F, mods: Command|Control, action: ToggleFullscreen } - #- { key: F, mods: Command, mode: ~Search, action: SearchForward } - #- { key: B, mods: Command, mode: ~Search, action: SearchBackward } - -#debug: - # Display the time it takes to redraw each frame. - #render_timer: false - - # Keep the log file after quitting Alacritty. - #persistent_logging: false - - # Log level - # - # Values for `log_level`: - # - Off - # - Error - # - Warn - # - Info - # - Debug - # - Trace - #log_level: Warn - - # Print all received window events. - #print_events: false diff --git a/configs/kitty/current-theme.conf b/configs/kitty/current-theme.conf deleted file mode 100644 index 29f8f9e..0000000 --- a/configs/kitty/current-theme.conf +++ /dev/null @@ -1,21 +0,0 @@ -background #000000 -foreground #fffaf3 -cursor #ffffff -selection_background #002a3a -color0 #222222 -color8 #444444 -color1 #ff000f -color9 #ff273f -color2 #8ce00a -color10 #abe05a -color3 #ffb900 -color11 #ffd141 -color4 #008df8 -color12 #0092ff -color5 #6c43a5 -color13 #9a5feb -color6 #00d7eb -color14 #67ffef -color7 #ffffff -color15 #ffffff -selection_foreground #0d0f18 diff --git a/configs/kitty/kitty.conf b/configs/kitty/kitty.conf deleted file mode 100644 index c625178..0000000 --- a/configs/kitty/kitty.conf +++ /dev/null @@ -1,1319 +0,0 @@ -# vim:fileencoding=utf-8:ft=conf:foldmethod=marker - -#: Fonts {{{ - -#: kitty has very powerful font management. You can configure -#: individual font faces and even specify special fonts for particular -#: characters. - -font_family FiraCode Nerd Font Mono -# bold_font auto -# italic_font auto -# bold_italic_font auto -# - -#: You can specify different fonts for the bold/italic/bold-italic -#: variants. To get a full list of supported fonts use the `kitty -#: list-fonts` command. By default they are derived automatically, by -#: the OSes font system. Setting them manually is useful for font -#: families that have many weight variants like Book, Medium, Thick, -#: etc. For example:: - -#: font_family Operator Mono Book -#: bold_font Operator Mono Medium -#: italic_font Operator Mono Book Italic -#: bold_italic_font Operator Mono Medium Italic - -font_size 13.0 - -#: Font size (in pts) - -# force_ltr no - -#: kitty does not support BIDI (bidirectional text), however, for RTL -#: scripts, words are automatically displayed in RTL. That is to say, -#: in an RTL script, the words "HELLO WORLD" display in kitty as -#: "WORLD HELLO", and if you try to select a substring of an RTL- -#: shaped string, you will get the character that would be there had -#: the the string been LTR. For example, assuming the Hebrew word -#: ירושלים, selecting the character that on the screen appears to be ם -#: actually writes into the selection buffer the character י. - -#: kitty's default behavior is useful in conjunction with a filter to -#: reverse the word order, however, if you wish to manipulate RTL -#: glyphs, it can be very challenging to work with, so this option is -#: provided to turn it off. Furthermore, this option can be used with -#: the command line program GNU FriBidi -#: to get BIDI -#: support, because it will force kitty to always treat the text as -#: LTR, which FriBidi expects for terminals. - -# adjust_line_height 0 -# adjust_column_width 0 - -#: Change the size of each character cell kitty renders. You can use -#: either numbers, which are interpreted as pixels or percentages -#: (number followed by %), which are interpreted as percentages of the -#: unmodified values. You can use negative pixels or percentages less -#: than 100% to reduce sizes (but this might cause rendering -#: artifacts). - -# symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols - -#: Map the specified unicode codepoints to a particular font. Useful -#: if you need special rendering for some symbols, such as for -#: Powerline. Avoids the need for patched fonts. Each unicode code -#: point is specified in the form U+. You -#: can specify multiple code points, separated by commas and ranges -#: separated by hyphens. symbol_map itself can be specified multiple -#: times. Syntax is:: - -#: symbol_map codepoints Font Family Name - -disable_ligatures never - -#: Choose how you want to handle multi-character ligatures. The -#: default is to always render them. You can tell kitty to not render -#: them when the cursor is over them by using cursor to make editing -#: easier, or have kitty never render them at all by using always, if -#: you don't like them. The ligature strategy can be set per-window -#: either using the kitty remote control facility or by defining -#: shortcuts for it in kitty.conf, for example:: - -#: map alt+1 disable_ligatures_in active always -#: map alt+2 disable_ligatures_in all never -#: map alt+3 disable_ligatures_in tab cursor - -#: Note that this refers to programming ligatures, typically -#: implemented using the calt OpenType feature. For disabling general -#: ligatures, use the font_features setting. - -# font_features none - -#: Choose exactly which OpenType features to enable or disable. This -#: is useful as some fonts might have features worthwhile in a -#: terminal. For example, Fira Code Retina includes a discretionary -#: feature, zero, which in that font changes the appearance of the -#: zero (0), to make it more easily distinguishable from Ø. Fira Code -#: Retina also includes other discretionary features known as -#: Stylistic Sets which have the tags ss01 through ss20. - -#: Note that this code is indexed by PostScript name, and not the font -#: family. This allows you to define very precise feature settings; -#: e.g. you can disable a feature in the italic font but not in the -#: regular font. - -#: On Linux, these are read from the FontConfig database first and -#: then this, setting is applied, so they can be configured in a -#: single, central place. - -#: To get the PostScript name for a font, use kitty + list-fonts -#: --psnames: - -#: .. code-block:: sh - -#: $ kitty + list-fonts --psnames | grep Fira -#: Fira Code -#: Fira Code Bold (FiraCode-Bold) -#: Fira Code Light (FiraCode-Light) -#: Fira Code Medium (FiraCode-Medium) -#: Fira Code Regular (FiraCode-Regular) -#: Fira Code Retina (FiraCode-Retina) - -#: The part in brackets is the PostScript name. - -#: Enable alternate zero and oldstyle numerals:: - -#: font_features FiraCode-Retina +zero +onum - -#: Enable only alternate zero:: - -#: font_features FiraCode-Retina +zero - -#: Disable the normal ligatures, but keep the calt feature which (in -#: this font) breaks up monotony:: - -#: font_features TT2020StyleB-Regular -liga +calt - -#: In conjunction with force_ltr, you may want to disable Arabic -#: shaping entirely, and only look at their isolated forms if they -#: show up in a document. You can do this with e.g.:: - -#: font_features UnifontMedium +isol -medi -fina -init - -# box_drawing_scale 0.001, 1, 1.5, 2 - -#: Change the sizes of the lines used for the box drawing unicode -#: characters These values are in pts. They will be scaled by the -#: monitor DPI to arrive at a pixel value. There must be four values -#: corresponding to thin, normal, thick, and very thick lines. - -#: }}} - -#: Cursor customization {{{ - -# cursor #cccccc - -#: Default cursor color - -# cursor_text_color #111111 - -#: Choose the color of text under the cursor. If you want it rendered -#: with the background color of the cell underneath instead, use the -#: special keyword: background - -# cursor_shape block - -#: The cursor shape can be one of (block, beam, underline) - -# cursor_beam_thickness 1.5 - -#: Defines the thickness of the beam cursor (in pts) - -# cursor_underline_thickness 2.0 - -#: Defines the thickness of the underline cursor (in pts) - -# cursor_blink_interval -1 - -#: The interval (in seconds) at which to blink the cursor. Set to zero -#: to disable blinking. Negative values mean use system default. Note -#: that numbers smaller than repaint_delay will be limited to -#: repaint_delay. - -# cursor_stop_blinking_after 15.0 - -#: Stop blinking cursor after the specified number of seconds of -#: keyboard inactivity. Set to zero to never stop blinking. - -#: }}} - -#: Scrollback {{{ - -# scrollback_lines 2000 - -#: Number of lines of history to keep in memory for scrolling back. -#: Memory is allocated on demand. Negative numbers are (effectively) -#: infinite scrollback. Note that using very large scrollback is not -#: recommended as it can slow down performance of the terminal and -#: also use large amounts of RAM. Instead, consider using -#: scrollback_pager_history_size. - -# scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER - -#: Program with which to view scrollback in a new window. The -#: scrollback buffer is passed as STDIN to this program. If you change -#: it, make sure the program you use can handle ANSI escape sequences -#: for colors and text formatting. INPUT_LINE_NUMBER in the command -#: line above will be replaced by an integer representing which line -#: should be at the top of the screen. Similarly CURSOR_LINE and -#: CURSOR_COLUMN will be replaced by the current cursor position. - -# scrollback_pager_history_size 0 - -#: Separate scrollback history size, used only for browsing the -#: scrollback buffer (in MB). This separate buffer is not available -#: for interactive scrolling but will be piped to the pager program -#: when viewing scrollback buffer in a separate window. The current -#: implementation stores the data in UTF-8, so approximatively 10000 -#: lines per megabyte at 100 chars per line, for pure ASCII text, -#: unformatted text. A value of zero or less disables this feature. -#: The maximum allowed size is 4GB. - -# wheel_scroll_multiplier 5.0 - -#: Modify the amount scrolled by the mouse wheel. Note this is only -#: used for low precision scrolling devices, not for high precision -#: scrolling on platforms such as macOS and Wayland. Use negative -#: numbers to change scroll direction. - -# touch_scroll_multiplier 1.0 - -#: Modify the amount scrolled by a touchpad. Note this is only used -#: for high precision scrolling devices on platforms such as macOS and -#: Wayland. Use negative numbers to change scroll direction. - -#: }}} - -#: Mouse {{{ - -# mouse_hide_wait 3.0 - -#: Hide mouse cursor after the specified number of seconds of the -#: mouse not being used. Set to zero to disable mouse cursor hiding. -#: Set to a negative value to hide the mouse cursor immediately when -#: typing text. Disabled by default on macOS as getting it to work -#: robustly with the ever-changing sea of bugs that is Cocoa is too -#: much effort. - -# url_color #0087bd -# url_style curly - -#: The color and style for highlighting URLs on mouse-over. url_style -#: can be one of: none, single, double, curly - -# open_url_modifiers kitty_mod - -#: The modifier keys to press when clicking with the mouse on URLs to -#: open the URL - -# open_url_with default - -#: The program with which to open URLs that are clicked on. The -#: special value default means to use the operating system's default -#: URL handler. - -# url_prefixes http https file ftp - -#: The set of URL prefixes to look for when detecting a URL under the -#: mouse cursor. - -# detect_urls yes - -#: Detect URLs under the mouse. Detected URLs are highlighted with an -#: underline and the mouse cursor becomes a hand over them. Even if -#: this option is disabled, URLs are still clickable. - -# copy_on_select no - -#: Copy to clipboard or a private buffer on select. With this set to -#: clipboard, simply selecting text with the mouse will cause the text -#: to be copied to clipboard. Useful on platforms such as macOS that -#: do not have the concept of primary selections. You can instead -#: specify a name such as a1 to copy to a private kitty buffer -#: instead. Map a shortcut with the paste_from_buffer action to paste -#: from this private buffer. For example:: - -#: map cmd+shift+v paste_from_buffer a1 - -#: Note that copying to the clipboard is a security risk, as all -#: programs, including websites open in your browser can read the -#: contents of the system clipboard. - -# strip_trailing_spaces never - -#: Remove spaces at the end of lines when copying to clipboard. A -#: value of smart will do it when using normal selections, but not -#: rectangle selections. always will always do it. - -# rectangle_select_modifiers ctrl+alt - -#: The modifiers to use rectangular selection (i.e. to select text in -#: a rectangular block with the mouse) - -# terminal_select_modifiers shift - -#: The modifiers to override mouse selection even when a terminal -#: application has grabbed the mouse - -# select_by_word_characters @-./_~?&=%+# - -#: Characters considered part of a word when double clicking. In -#: addition to these characters any character that is marked as an -#: alphanumeric character in the unicode database will be matched. - -# click_interval -1.0 - -#: The interval between successive clicks to detect double/triple -#: clicks (in seconds). Negative numbers will use the system default -#: instead, if available, or fallback to 0.5. - -# focus_follows_mouse no - -#: Set the active window to the window under the mouse when moving the -#: mouse around - -# pointer_shape_when_grabbed arrow - -#: The shape of the mouse pointer when the program running in the -#: terminal grabs the mouse. Valid values are: arrow, beam and hand - -# default_pointer_shape beam - -#: The default shape of the mouse pointer. Valid values are: arrow, -#: beam and hand - -# pointer_shape_when_dragging beam - -#: The default shape of the mouse pointer when dragging across text. -#: Valid values are: arrow, beam and hand - -#: }}} - -#: Performance tuning {{{ - -# repaint_delay 10 - -#: Delay (in milliseconds) between screen updates. Decreasing it, -#: increases frames-per-second (FPS) at the cost of more CPU usage. -#: The default value yields ~100 FPS which is more than sufficient for -#: most uses. Note that to actually achieve 100 FPS you have to either -#: set sync_to_monitor to no or use a monitor with a high refresh -#: rate. Also, to minimize latency when there is pending input to be -#: processed, repaint_delay is ignored. - -# input_delay 3 - -#: Delay (in milliseconds) before input from the program running in -#: the terminal is processed. Note that decreasing it will increase -#: responsiveness, but also increase CPU usage and might cause flicker -#: in full screen programs that redraw the entire screen on each loop, -#: because kitty is so fast that partial screen updates will be drawn. - -# sync_to_monitor yes - -#: Sync screen updates to the refresh rate of the monitor. This -#: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing) -#: when scrolling. However, it limits the rendering speed to the -#: refresh rate of your monitor. With a very high speed mouse/high -#: keyboard repeat rate, you may notice some slight input latency. If -#: so, set this to no. - -#: }}} - -#: Terminal bell {{{ - -enable_audio_bell no - -#: Enable/disable the audio bell. Useful in environments that requir -#: silence. - -# visual_bell_duration 0.0 - -#: Visual bell duration. Flash the screen when a bell occurs for the -#: specified number of seconds. Set to zero to disable. - -# window_alert_on_bell yes - -#: Request window attention on bell. Makes the dock icon bounce on -#: macOS or the taskbar flash on linux. - -# bell_on_tab yes - -#: Show a bell symbol on the tab if a bell occurs in one of the -#: windows in the tab and the window is not the currently focused -#: window - -# command_on_bell none - -#: Program to run when a bell occurs. - -#: }}} - -#: Window layout {{{ - -# remember_window_size yes -# initial_window_width 640 -# initial_window_height 400 - -#: If enabled, the window size will be remembered so that new -#: instances of kitty will have the same size as the previous -#: instance. If disabled, the window will initially have size -#: configured by initial_window_width/height, in pixels. You can use a -#: suffix of "c" on the width/height values to have them interpreted -#: as number of cells instead of pixels. - -# enabled_layouts * - -#: The enabled window layouts. A comma separated list of layout names. -#: The special value all means all layouts. The first listed layout -#: will be used as the startup layout. Default configuration is all -#: layouts in alphabetical order. For a list of available layouts, see -#: the https://sw.kovidgoyal.net/kitty/index.html#layouts. - -# window_resize_step_cells 2 -# window_resize_step_lines 2 - -#: The step size (in units of cell width/cell height) to use when -#: resizing windows. The cells value is used for horizontal resizing -#: and the lines value for vertical resizing. - -# window_border_width 0.5pt - -#: The width of window borders. Can be either in pixels (px) or pts -#: (pt). Values in pts will be rounded to the nearest number of pixels -#: based on screen resolution. If not specified the unit is assumed to -#: be pts. Note that borders are displayed only when more than one -#: window is visible. They are meant to separate multiple windows. - -draw_minimal_borders yes - -#: Draw only the minimum borders needed. This means that only the -#: minimum needed borders for inactive windows are drawn. That is only -#: the borders that separate the inactive window from a neighbor. Note -#: that setting a non-zero window margin overrides this and causes all -#: borders to be drawn. - -# window_margin_width 0 - -#: The window margin (in pts) (blank area outside the border). A -#: single value sets all four sides. Two values set the vertical and -#: horizontal sides. Three values set top, horizontal and bottom. Four -#: values set top, right, bottom and left. - -# single_window_margin_width -1 - -#: The window margin (in pts) to use when only a single window is -#: visible. Negative values will cause the value of -#: window_margin_width to be used instead. A single value sets all -#: four sides. Two values set the vertical and horizontal sides. Three -#: values set top, horizontal and bottom. Four values set top, right, -#: bottom and left. - -window_padding_width 10 - -#: The window padding (in pts) (blank area between the text and the -#: window border). A single value sets all four sides. Two values set -#: the vertical and horizontal sides. Three values set top, horizontal -#: and bottom. Four values set top, right, bottom and left. - -# placement_strategy center - -#: When the window size is not an exact multiple of the cell size, the -#: cell area of the terminal window will have some extra padding on -#: the sides. You can control how that padding is distributed with -#: this option. Using a value of center means the cell area will be -#: placed centrally. A value of top-left means the padding will be on -#: only the bottom and right edges. - -# active_border_color #00ff00 - -#: The color for the border of the active window. Set this to none to -#: not draw borders around the active window. - -# inactive_border_color #cccccc - -#: The color for the border of inactive windows - -# bell_border_color #ff5a00 - -#: The color for the border of inactive windows in which a bell has -#: occurred - -# inactive_text_alpha 1.0 - -#: Fade the text in inactive windows by the specified amount (a number -#: between zero and one, with zero being fully faded). - -hide_window_decorations yes - -#: Hide the window decorations (title-bar and window borders) with -#: yes. On macOS, titlebar-only can be used to only hide the titlebar. -#: Whether this works and exactly what effect it has depends on the -#: window manager/operating system. - -# resize_debounce_time 0.1 - -#: The time (in seconds) to wait before redrawing the screen when a -#: resize event is received. On platforms such as macOS, where the -#: operating system sends events corresponding to the start and end of -#: a resize, this number is ignored. - -# resize_draw_strategy static - -#: Choose how kitty draws a window while a resize is in progress. A -#: value of static means draw the current window contents, mostly -#: unchanged. A value of scale means draw the current window contents -#: scaled. A value of blank means draw a blank window. A value of size -#: means show the window size in cells. - -# resize_in_steps no - -#: Resize the OS window in steps as large as the cells, instead of -#: with the usual pixel accuracy. Combined with an -#: initial_window_width and initial_window_height in number of cells, -#: this option can be used to keep the margins as small as possible -#: when resizing the OS window. Note that this does not currently work -#: on Wayland. - -# confirm_os_window_close 0 - -#: Ask for confirmation when closing an OS window or a tab that has at -#: least this number of kitty windows in it. A value of zero disables -#: confirmation. This confirmation also applies to requests to quit -#: the entire application (all OS windows, via the quit action). - -#: }}} - -#: Tab bar {{{ - -# tab_bar_edge bottom - -#: Which edge to show the tab bar on, top or bottom - -# tab_bar_margin_width 0.0 - -#: The margin to the left and right of the tab bar (in pts) - -# tab_bar_style fade - -#: The tab bar style, can be one of: fade, separator, powerline, or -#: hidden. In the fade style, each tab's edges fade into the -#: background color, in the separator style, tabs are separated by a -#: configurable separator, and the powerline shows the tabs as a -#: continuous line. If you use the hidden style, you might want to -#: create a mapping for the select_tab action which presents you with -#: a list of tabs and allows for easy switching to a tab. - -# tab_bar_min_tabs 2 - -#: The minimum number of tabs that must exist before the tab bar is -#: shown - -# tab_switch_strategy previous - -#: The algorithm to use when switching to a tab when the current tab -#: is closed. The default of previous will switch to the last used -#: tab. A value of left will switch to the tab to the left of the -#: closed tab. A value of right will switch to the tab to the right of -#: the closed tab. A value of last will switch to the right-most tab. - -# tab_fade 0.25 0.5 0.75 1 - -#: Control how each tab fades into the background when using fade for -#: the tab_bar_style. Each number is an alpha (between zero and one) -#: that controls how much the corresponding cell fades into the -#: background, with zero being no fade and one being full fade. You -#: can change the number of cells used by adding/removing entries to -#: this list. - -# tab_separator " ┇" - -#: The separator between tabs in the tab bar when using separator as -#: the tab_bar_style. - -# tab_activity_symbol none - -#: Some text or a unicode symbol to show on the tab if a window in the -#: tab that does not have focus has some activity. - -# tab_title_template "{title}" - -#: A template to render the tab title. The default just renders the -#: title. If you wish to include the tab-index as well, use something -#: like: {index}: {title}. Useful if you have shortcuts mapped for -#: goto_tab N. In addition you can use {layout_name} for the current -#: layout name and {num_windows} for the number of windows in the tab. -#: Note that formatting is done by Python's string formatting -#: machinery, so you can use, for instance, {layout_name[:2].upper()} -#: to show only the first two letters of the layout name, upper-cased. -#: If you want to style the text, you can use styling directives, for -#: example: {fmt.fg.red}red{fmt.fg.default}normal{fmt.bg._00FF00}green -#: bg{fmt.bg.normal}. Similarly, for bold and italic: -#: {fmt.bold}bold{fmt.nobold}normal{fmt.italic}italic{fmt.noitalic}. - -# active_tab_title_template none - -#: Template to use for active tabs, if not specified falls back to -#: tab_title_template. - -# active_tab_foreground #000 -# active_tab_background #eee -# active_tab_font_style bold-italic -# inactive_tab_foreground #444 -# inactive_tab_background #999 -# inactive_tab_font_style normal - -#: Tab bar colors and styles - -# tab_bar_background none - -#: Background color for the tab bar. Defaults to using the terminal -#: background color. - -#: }}} - -#: Color scheme {{{ -# -# foreground #dddddd -# background #000000 - -#: The foreground and background colors - -# background_opacity 1.0 - -#: The opacity of the background. A number between 0 and 1, where 1 is -#: opaque and 0 is fully transparent. This will only work if -#: supported by the OS (for instance, when using a compositor under -#: X11). Note that it only sets the background color's opacity in -#: cells that have the same background color as the default terminal -#: background. This is so that things like the status bar in vim, -#: powerline prompts, etc. still look good. But it means that if you -#: use a color theme with a background color in your editor, it will -#: not be rendered as transparent. Instead you should change the -#: default background color in your kitty config and not use a -#: background color in the editor color scheme. Or use the escape -#: codes to set the terminals default colors in a shell script to -#: launch your editor. Be aware that using a value less than 1.0 is a -#: (possibly significant) performance hit. If you want to dynamically -#: change transparency of windows set dynamic_background_opacity to -#: yes (this is off by default as it has a performance cost) - -# background_image none - -#: Path to a background image. Must be in PNG format. - -# background_image_layout tiled - -#: Whether to tile or scale the background image. - -# background_image_linear no - -#: When background image is scaled, whether linear interpolation -#: should be used. - -# dynamic_background_opacity no - -#: Allow changing of the background_opacity dynamically, using either -#: keyboard shortcuts (increase_background_opacity and -#: decrease_background_opacity) or the remote control facility. - -# background_tint 0.0 - -#: How much to tint the background image by the background color. The -#: tint is applied only under the text area, not margin/borders. Makes -#: it easier to read the text. Tinting is done using the current -#: background color for each window. This setting applies only if -#: background_opacity is set and transparent windows are supported or -#: background_image is set. - -# dim_opacity 0.75 - -#: How much to dim text that has the DIM/FAINT attribute set. One -#: means no dimming and zero means fully dimmed (i.e. invisible). - -# selection_foreground #000000 - -#: The foreground for text selected with the mouse. A value of none -#: means to leave the color unchanged. - -# selection_background #fffacd - -#: The background for text selected with the mouse. - - -#: The 16 terminal colors. There are 8 basic colors, each color has a -#: dull and bright version. You can also set the remaining colors from -#: the 256 color table as color16 to color255. - -# color0 #000000 -# color8 #767676 - -#: black - -# color1 #cc0403 -# color9 #f2201f - -#: red - -# color2 #19cb00 -# color10 #23fd00 - -#: green - -# color3 #cecb00 -# color11 #fffd00 - -#: yellow - -# color4 #0d73cc -# color12 #1a8fff - -#: blue - -# color5 #cb1ed1 -# color13 #fd28ff - -#: magenta - -# color6 #0dcdcd -# color14 #14ffff - -#: cyan - -# color7 #dddddd -# color15 #ffffff - -#: white - -# mark1_foreground black - -#: Color for marks of type 1 - -# mark1_background #98d3cb - -#: Color for marks of type 1 (light steel blue) - -# mark2_foreground black - -#: Color for marks of type 2 - -# mark2_background #f2dcd3 - -#: Color for marks of type 1 (beige) - -# mark3_foreground black - -#: Color for marks of type 3 - -# mark3_background #f274bc - -#: Color for marks of type 1 (violet) - -#: }}} - -#: Advanced {{{ - -# shell . - -#: The shell program to execute. The default value of . means to use -#: whatever shell is set as the default shell for the current user. -#: Note that on macOS if you change this, you might need to add -#: --login to ensure that the shell starts in interactive mode and -#: reads its startup rc files. - -# editor . - -#: The console editor to use when editing the kitty config file or -#: similar tasks. A value of . means to use the environment variables -#: VISUAL and EDITOR in that order. Note that this environment -#: variable has to be set not just in your shell startup scripts but -#: system-wide, otherwise kitty will not see it. - -# close_on_child_death no - -#: Close the window when the child process (shell) exits. If no (the -#: default), the terminal will remain open when the child exits as -#: long as there are still processes outputting to the terminal (for -#: example disowned or backgrounded processes). If yes, the window -#: will close as soon as the child process exits. Note that setting it -#: to yes means that any background processes still using the terminal -#: can fail silently because their stdout/stderr/stdin no longer work. - -allow_remote_control yes - -#: Allow other programs to control kitty. If you turn this on other -#: programs can control all aspects of kitty, including sending text -#: to kitty windows, opening new windows, closing windows, reading the -#: content of windows, etc. Note that this even works over ssh -#: connections. You can chose to either allow any program running -#: within kitty to control it, with yes or only programs that connect -#: to the socket specified with the kitty --listen-on command line -#: option, if you use the value socket-only. The latter is useful if -#: you want to prevent programs running on a remote computer over ssh -#: from controlling kitty. - -listen_on unix:/tmp/kitty-socket - -#: Tell kitty to listen to the specified unix/tcp socket for remote -#: control connections. Note that this will apply to all kitty -#: instances. It can be overridden by the kitty --listen-on command -#: line flag. This option accepts only UNIX sockets, such as -#: unix:${TEMP}/mykitty or (on Linux) unix:@mykitty. Environment -#: variables are expanded. If {kitty_pid} is present then it is -#: replaced by the PID of the kitty process, otherwise the PID of the -#: kitty process is appended to the value, with a hyphen. This option -#: is ignored unless you also set allow_remote_control to enable -#: remote control. See the help for kitty --listen-on for more -#: details. - -# env - -#: Specify environment variables to set in all child processes. Note -#: that environment variables are expanded recursively, so if you -#: use:: - -#: env MYVAR1=a -#: env MYVAR2=${MYVAR1}/${HOME}/b - -#: The value of MYVAR2 will be a//b. - -# update_check_interval 24 - -#: Periodically check if an update to kitty is available. If an update -#: is found a system notification is displayed informing you of the -#: available update. The default is to check every 24 hrs, set to zero -#: to disable. - -# startup_session none - -#: Path to a session file to use for all kitty instances. Can be -#: overridden by using the kitty --session command line option for -#: individual instances. See -#: https://sw.kovidgoyal.net/kitty/index.html#sessions in the kitty -#: documentation for details. Note that relative paths are interpreted -#: with respect to the kitty config directory. Environment variables -#: in the path are expanded. - -# clipboard_control write-clipboard write-primary - -#: Allow programs running in kitty to read and write from the -#: clipboard. You can control exactly which actions are allowed. The -#: set of possible actions is: write-clipboard read-clipboard write- -#: primary read-primary. You can additionally specify no-append to -#: disable kitty's protocol extension for clipboard concatenation. The -#: default is to allow writing to the clipboard and primary selection -#: with concatenation enabled. Note that enabling the read -#: functionality is a security risk as it means that any program, even -#: one running on a remote server via SSH can read your clipboard. - -# allow_hyperlinks yes - -#: Process hyperlink (OSC 8) escape sequences. If disabled OSC 8 -#: escape sequences are ignored. Otherwise they become clickable -#: links, that you can click by holding down ctrl+shift and clicking -#: with the mouse. The special value of ``ask`` means that kitty will -#: ask before opening the link. - -# term xterm-kitty - -#: The value of the TERM environment variable to set. Changing this -#: can break many terminal programs, only change it if you know what -#: you are doing, not because you read some advice on Stack Overflow -#: to change it. The TERM variable is used by various programs to get -#: information about the capabilities and behavior of the terminal. If -#: you change it, depending on what programs you run, and how -#: different the terminal you are changing it to is, various things -#: from key-presses, to colors, to various advanced features may not -#: work. - -#: }}} - -#: OS specific tweaks {{{ - -# macos_titlebar_color system - -#: Change the color of the kitty window's titlebar on macOS. A value -#: of system means to use the default system color, a value of -#: background means to use the background color of the currently -#: active window and finally you can use an arbitrary color, such as -#: #12af59 or red. WARNING: This option works by using a hack, as -#: there is no proper Cocoa API for it. It sets the background color -#: of the entire window and makes the titlebar transparent. As such it -#: is incompatible with background_opacity. If you want to use both, -#: you are probably better off just hiding the titlebar with -#: hide_window_decorations. - -# macos_option_as_alt no - -#: Use the option key as an alt key. With this set to no, kitty will -#: use the macOS native Option+Key = unicode character behavior. This -#: will break any Alt+key keyboard shortcuts in your terminal -#: programs, but you can use the macOS unicode input technique. You -#: can use the values: left, right, or both to use only the left, -#: right or both Option keys as Alt, instead. - -# macos_hide_from_tasks no - -#: Hide the kitty window from running tasks (Option+Tab) on macOS. - -# macos_quit_when_last_window_closed no - -#: Have kitty quit when all the top-level windows are closed. By -#: default, kitty will stay running, even with no open windows, as is -#: the expected behavior on macOS. - -# macos_window_resizable yes - -#: Disable this if you want kitty top-level (OS) windows to not be -#: resizable on macOS. - -# macos_thicken_font 0 - -#: Draw an extra border around the font with the given width, to -#: increase legibility at small font sizes. For example, a value of -#: 0.75 will result in rendering that looks similar to sub-pixel -#: antialiasing at common font sizes. - -# macos_traditional_fullscreen no - -#: Use the traditional full-screen transition, that is faster, but -#: less pretty. - -# macos_show_window_title_in all - -#: Show or hide the window title in the macOS window or menu-bar. A -#: value of window will show the title of the currently active window -#: at the top of the macOS window. A value of menubar will show the -#: title of the currently active window in the macOS menu-bar, making -#: use of otherwise wasted space. all will show the title everywhere -#: and none hides the title in the window and the menu-bar. - -# macos_custom_beam_cursor no - -#: Enable/disable custom mouse cursor for macOS that is easier to see -#: on both light and dark backgrounds. WARNING: this might make your -#: mouse cursor invisible on dual GPU machines. - -# linux_display_server auto - -#: Choose between Wayland and X11 backends. By default, an appropriate -#: backend based on the system state is chosen automatically. Set it -#: to x11 or wayland to force the choice. - -#: }}} - -#: Keyboard shortcuts {{{ - -#: For a list of key names, see: the GLFW key macros -#: . -#: The name to use is the part after the GLFW_KEY_ prefix. For a list -#: of modifier names, see: GLFW mods -#: - -#: On Linux you can also use XKB key names to bind keys that are not -#: supported by GLFW. See XKB keys -#: for a list of key names. The name to use is the part -#: after the XKB_KEY_ prefix. Note that you can only use an XKB key -#: name for keys that are not known as GLFW keys. - -#: Finally, you can use raw system key codes to map keys, again only -#: for keys that are not known as GLFW keys. To see the system key -#: code for a key, start kitty with the kitty --debug-keyboard option. -#: Then kitty will output some debug text for every key event. In that -#: text look for ``native_code`` the value of that becomes the key -#: name in the shortcut. For example: - -#: .. code-block:: none - -#: on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a' - -#: Here, the key name for the A key is 0x61 and you can use it with:: - -#: map ctrl+0x61 something - -#: to map ctrl+a to something. - -#: You can use the special action no_op to unmap a keyboard shortcut -#: that is assigned in the default configuration:: - -#: map kitty_mod+space no_op - -#: You can combine multiple actions to be triggered by a single -#: shortcut, using the syntax below:: - -#: map key combine action1 action2 action3 ... - -#: For example:: - -#: map kitty_mod+e combine : new_window : next_layout - -#: this will create a new window and switch to the next available -#: layout - -#: You can use multi-key shortcuts using the syntax shown below:: - -#: map key1>key2>key3 action - -#: For example:: - -#: map ctrl+f>2 set_font_size 20 - -kitty_mod ctrl+shift - -#: The value of kitty_mod is used as the modifier for all default -#: shortcuts, you can change it in your kitty.conf to change the -#: modifiers for all the default shortcuts. - -# clear_all_shortcuts no - -#: You can have kitty remove all shortcut definition seen up to this -#: point. Useful, for instance, to remove the default shortcuts. - -# kitten_alias hints hints --hints-offset=0 - -#: You can create aliases for kitten names, this allows overriding the -#: defaults for kitten options and can also be used to shorten -#: repeated mappings of the same kitten with a specific group of -#: options. For example, the above alias changes the default value of -#: kitty +kitten hints --hints-offset to zero for all mappings, -#: including the builtin ones. - -#: Clipboard {{{ - -# map kitty_mod+c copy_to_clipboard - -#: There is also a copy_or_interrupt action that can be optionally -#: mapped to Ctrl+c. It will copy only if there is a selection and -#: send an interrupt otherwise. Similarly, copy_and_clear_or_interrupt -#: will copy and clear the selection or send an interrupt if there is -#: no selection. - -# map kitty_mod+v paste_from_clipboard -# map kitty_mod+s paste_from_selection -# map shift+insert paste_from_selection -# map kitty_mod+o pass_selection_to_program - -#: You can also pass the contents of the current selection to any -#: program using pass_selection_to_program. By default, the system's -#: open program is used, but you can specify your own, the selection -#: will be passed as a command line argument to the program, for -#: example:: - -#: map kitty_mod+o pass_selection_to_program firefox - -#: You can pass the current selection to a terminal program running in -#: a new kitty window, by using the @selection placeholder:: - -#: map kitty_mod+y new_window less @selection - -#: }}} - -#: Scrolling {{{ - -# map kitty_mod+up scroll_line_up -# map kitty_mod+k scroll_line_up -# map kitty_mod+down scroll_line_down -# map kitty_mod+j scroll_line_down -# map kitty_mod+page_up scroll_page_up -# map kitty_mod+page_down scroll_page_down -# map kitty_mod+home scroll_home -# map kitty_mod+end scroll_end -# map kitty_mod+h show_scrollback - -#: You can pipe the contents of the current screen + history buffer as -#: STDIN to an arbitrary program using the ``launch`` function. For -#: example, the following opens the scrollback buffer in less in an -#: overlay window:: - -#: map f1 launch --stdin-source=@screen_scrollback --stdin-add-formatting --type=overlay less +G -R - -#: For more details on piping screen and buffer contents to external -#: programs, see launch. - -#: }}} - -#: Window management {{{ - -# map kitty_mod+enter new_window - -#: You can open a new window running an arbitrary program, for -#: example:: - -#: map kitty_mod+y launch mutt - -#: You can open a new window with the current working directory set to -#: the working directory of the current window using:: - -#: map ctrl+alt+enter launch --cwd=current - -#: You can open a new window that is allowed to control kitty via the -#: kitty remote control facility by prefixing the command line with @. -#: Any programs running in that window will be allowed to control -#: kitty. For example:: - -#: map ctrl+enter launch --allow-remote-control some_program - -#: You can open a new window next to the currently active window or as -#: the first window, with:: - -#: map ctrl+n launch --location=neighbor some_program -#: map ctrl+f launch --location=first some_program - -#: For more details, see launch. - -# map kitty_mod+n new_os_window - -#: Works like new_window above, except that it opens a top level OS -#: kitty window. In particular you can use new_os_window_with_cwd to -#: open a window with the current working directory. - -# map kitty_mod+w close_window -# map kitty_mod+] next_window -# map kitty_mod+[ previous_window -# map kitty_mod+f move_window_forward -# map kitty_mod+b move_window_backward -# map kitty_mod+` move_window_to_top -# map kitty_mod+r start_resizing_window -# map kitty_mod+1 first_window -# map kitty_mod+2 second_window -# map kitty_mod+3 third_window -# map kitty_mod+4 fourth_window -# map kitty_mod+5 fifth_window -# map kitty_mod+6 sixth_window -# map kitty_mod+7 seventh_window -# map kitty_mod+8 eighth_window -# map kitty_mod+9 ninth_window -# map kitty_mod+0 tenth_window -#: }}} - -#: Tab management {{{ - -# map kitty_mod+right next_tab -# map kitty_mod+left previous_tab -# map kitty_mod+t new_tab -# map kitty_mod+q close_tab -# map kitty_mod+. move_tab_forward -# map kitty_mod+, move_tab_backward -# map kitty_mod+alt+t set_tab_title - -#: You can also create shortcuts to go to specific tabs, with 1 being -#: the first tab, 2 the second tab and -1 being the previously active -#: tab, and any number larger than the last tab being the last tab:: - -#: map ctrl+alt+1 goto_tab 1 -#: map ctrl+alt+2 goto_tab 2 - -#: Just as with new_window above, you can also pass the name of -#: arbitrary commands to run when using new_tab and use -#: new_tab_with_cwd. Finally, if you want the new tab to open next to -#: the current tab rather than at the end of the tabs list, use:: - -#: map ctrl+t new_tab !neighbor [optional cmd to run] -#: }}} - -#: Layout management {{{ - -# map kitty_mod+l next_layout - -#: You can also create shortcuts to switch to specific layouts:: - -#: map ctrl+alt+t goto_layout tall -#: map ctrl+alt+s goto_layout stack - -#: Similarly, to switch back to the previous layout:: - -#: map ctrl+alt+p last_used_layout -#: }}} - -#: Font sizes {{{ - -#: You can change the font size for all top-level kitty OS windows at -#: a time or only the current one. - -map kitty_mod+plus change_font_size all +2.0 -map kitty_mod+minus change_font_size all -2.0 -# map kitty_mod+backspace change_font_size all 0 - -#: To setup shortcuts for specific font sizes:: - -#: map kitty_mod+f6 change_font_size all 10.0 - -#: To setup shortcuts to change only the current OS window's font -#: size:: - -#: map kitty_mod+f6 change_font_size current 10.0 -#: }}} - -#: Select and act on visible text {{{ - -#: Use the hints kitten to select text and either pass it to an -#: external program or insert it into the terminal or copy it to the -#: clipboard. - -# map kitty_mod+e kitten hints - -#: Open a currently visible URL using the keyboard. The program used -#: to open the URL is specified in open_url_with. - -# map kitty_mod+p>f kitten hints --type path --program - - -#: Select a path/filename and insert it into the terminal. Useful, for -#: instance to run git commands on a filename output from a previous -#: git command. - -# map kitty_mod+p>shift+f kitten hints --type path - -#: Select a path/filename and open it with the default open program. - -# map kitty_mod+p>l kitten hints --type line --program - - -#: Select a line of text and insert it into the terminal. Use for the -#: output of things like: ls -1 - -# map kitty_mod+p>w kitten hints --type word --program - - -#: Select words and insert into terminal. - -# map kitty_mod+p>h kitten hints --type hash --program - - -#: Select something that looks like a hash and insert it into the -#: terminal. Useful with git, which uses sha1 hashes to identify -#: commits - -# map kitty_mod+p>n kitten hints --type linenum - -#: Select something that looks like filename:linenum and open it in -#: vim at the specified line number. - -# map kitty_mod+p>y kitten hints --type hyperlink - -#: Select a hyperlink (i.e. a URL that has been marked as such by the -#: terminal program, for example, by ls --hyperlink=auto). - - -#: The hints kitten has many more modes of operation that you can map -#: to different shortcuts. For a full description see kittens/hints. -#: }}} - -#: Miscellaneous {{{ - -# map kitty_mod+f11 toggle_fullscreen -# map kitty_mod+f10 toggle_maximized -# map kitty_mod+u kitten unicode_input -# map kitty_mod+f2 edit_config_file -# map kitty_mod+escape kitty_shell window - -#: Open the kitty shell in a new window/tab/overlay/os_window to -#: control kitty using commands. - -# map kitty_mod+a>m set_background_opacity +0.1 -# map kitty_mod+a>l set_background_opacity -0.1 -# map kitty_mod+a>1 set_background_opacity 1 -# map kitty_mod+a>d set_background_opacity default -# map kitty_mod+delete clear_terminal reset active - -#: You can create shortcuts to clear/reset the terminal. For example:: - -#: # Reset the terminal -#: map kitty_mod+f9 clear_terminal reset active -#: # Clear the terminal screen by erasing all contents -#: map kitty_mod+f10 clear_terminal clear active -#: # Clear the terminal scrollback by erasing it -#: map kitty_mod+f11 clear_terminal scrollback active -#: # Scroll the contents of the screen into the scrollback -#: map kitty_mod+f12 clear_terminal scroll active - -#: If you want to operate on all windows instead of just the current -#: one, use all instead of active. - -#: It is also possible to remap Ctrl+L to both scroll the current -#: screen contents into the scrollback buffer and clear the screen, -#: instead of just clearing the screen:: - -#: map ctrl+l combine : clear_terminal scroll active : send_text normal,application \x0c - - -#: You can tell kitty to send arbitrary (UTF-8) encoded text to the -#: client program when pressing specified shortcut keys. For example:: - -#: map ctrl+alt+a send_text all Special text - -#: This will send "Special text" when you press the ctrl+alt+a key -#: combination. The text to be sent is a python string literal so you -#: can use escapes like \x1b to send control codes or \u21fb to send -#: unicode characters (or you can just input the unicode characters -#: directly as UTF-8 text). The first argument to send_text is the -#: keyboard modes in which to activate the shortcut. The possible -#: values are normal or application or kitty or a comma separated -#: combination of them. The special keyword all means all modes. The -#: modes normal and application refer to the DECCKM cursor key mode -#: for terminals, and kitty refers to the special kitty extended -#: keyboard protocol. - -#: Another example, that outputs a word and then moves the cursor to -#: the start of the line (same as pressing the Home key):: - -#: map ctrl+alt+a send_text normal Word\x1b[H -#: map ctrl+alt+a send_text application Word\x1bOH - -#: }}} - -# }}} - - -# BEGIN_KITTY_THEME -# Argonaut -include current-theme.conf -# END_KITTY_THEME diff --git a/configs/kitty/kitty.conf.bak b/configs/kitty/kitty.conf.bak deleted file mode 100644 index 8c61916..0000000 --- a/configs/kitty/kitty.conf.bak +++ /dev/null @@ -1,1319 +0,0 @@ -# vim:fileencoding=utf-8:ft=conf:foldmethod=marker - -#: Fonts {{{ - -#: kitty has very powerful font management. You can configure -#: individual font faces and even specify special fonts for particular -#: characters. - -font_family FiraCode Nerd Font Mono -# bold_font auto -# italic_font auto -# bold_italic_font auto -# - -#: You can specify different fonts for the bold/italic/bold-italic -#: variants. To get a full list of supported fonts use the `kitty -#: list-fonts` command. By default they are derived automatically, by -#: the OSes font system. Setting them manually is useful for font -#: families that have many weight variants like Book, Medium, Thick, -#: etc. For example:: - -#: font_family Operator Mono Book -#: bold_font Operator Mono Medium -#: italic_font Operator Mono Book Italic -#: bold_italic_font Operator Mono Medium Italic - -font_size 13.0 - -#: Font size (in pts) - -# force_ltr no - -#: kitty does not support BIDI (bidirectional text), however, for RTL -#: scripts, words are automatically displayed in RTL. That is to say, -#: in an RTL script, the words "HELLO WORLD" display in kitty as -#: "WORLD HELLO", and if you try to select a substring of an RTL- -#: shaped string, you will get the character that would be there had -#: the the string been LTR. For example, assuming the Hebrew word -#: ירושלים, selecting the character that on the screen appears to be ם -#: actually writes into the selection buffer the character י. - -#: kitty's default behavior is useful in conjunction with a filter to -#: reverse the word order, however, if you wish to manipulate RTL -#: glyphs, it can be very challenging to work with, so this option is -#: provided to turn it off. Furthermore, this option can be used with -#: the command line program GNU FriBidi -#: to get BIDI -#: support, because it will force kitty to always treat the text as -#: LTR, which FriBidi expects for terminals. - -# adjust_line_height 0 -# adjust_column_width 0 - -#: Change the size of each character cell kitty renders. You can use -#: either numbers, which are interpreted as pixels or percentages -#: (number followed by %), which are interpreted as percentages of the -#: unmodified values. You can use negative pixels or percentages less -#: than 100% to reduce sizes (but this might cause rendering -#: artifacts). - -# symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols - -#: Map the specified unicode codepoints to a particular font. Useful -#: if you need special rendering for some symbols, such as for -#: Powerline. Avoids the need for patched fonts. Each unicode code -#: point is specified in the form U+. You -#: can specify multiple code points, separated by commas and ranges -#: separated by hyphens. symbol_map itself can be specified multiple -#: times. Syntax is:: - -#: symbol_map codepoints Font Family Name - -disable_ligatures never - -#: Choose how you want to handle multi-character ligatures. The -#: default is to always render them. You can tell kitty to not render -#: them when the cursor is over them by using cursor to make editing -#: easier, or have kitty never render them at all by using always, if -#: you don't like them. The ligature strategy can be set per-window -#: either using the kitty remote control facility or by defining -#: shortcuts for it in kitty.conf, for example:: - -#: map alt+1 disable_ligatures_in active always -#: map alt+2 disable_ligatures_in all never -#: map alt+3 disable_ligatures_in tab cursor - -#: Note that this refers to programming ligatures, typically -#: implemented using the calt OpenType feature. For disabling general -#: ligatures, use the font_features setting. - -# font_features none - -#: Choose exactly which OpenType features to enable or disable. This -#: is useful as some fonts might have features worthwhile in a -#: terminal. For example, Fira Code Retina includes a discretionary -#: feature, zero, which in that font changes the appearance of the -#: zero (0), to make it more easily distinguishable from Ø. Fira Code -#: Retina also includes other discretionary features known as -#: Stylistic Sets which have the tags ss01 through ss20. - -#: Note that this code is indexed by PostScript name, and not the font -#: family. This allows you to define very precise feature settings; -#: e.g. you can disable a feature in the italic font but not in the -#: regular font. - -#: On Linux, these are read from the FontConfig database first and -#: then this, setting is applied, so they can be configured in a -#: single, central place. - -#: To get the PostScript name for a font, use kitty + list-fonts -#: --psnames: - -#: .. code-block:: sh - -#: $ kitty + list-fonts --psnames | grep Fira -#: Fira Code -#: Fira Code Bold (FiraCode-Bold) -#: Fira Code Light (FiraCode-Light) -#: Fira Code Medium (FiraCode-Medium) -#: Fira Code Regular (FiraCode-Regular) -#: Fira Code Retina (FiraCode-Retina) - -#: The part in brackets is the PostScript name. - -#: Enable alternate zero and oldstyle numerals:: - -#: font_features FiraCode-Retina +zero +onum - -#: Enable only alternate zero:: - -#: font_features FiraCode-Retina +zero - -#: Disable the normal ligatures, but keep the calt feature which (in -#: this font) breaks up monotony:: - -#: font_features TT2020StyleB-Regular -liga +calt - -#: In conjunction with force_ltr, you may want to disable Arabic -#: shaping entirely, and only look at their isolated forms if they -#: show up in a document. You can do this with e.g.:: - -#: font_features UnifontMedium +isol -medi -fina -init - -# box_drawing_scale 0.001, 1, 1.5, 2 - -#: Change the sizes of the lines used for the box drawing unicode -#: characters These values are in pts. They will be scaled by the -#: monitor DPI to arrive at a pixel value. There must be four values -#: corresponding to thin, normal, thick, and very thick lines. - -#: }}} - -#: Cursor customization {{{ - -# cursor #cccccc - -#: Default cursor color - -# cursor_text_color #111111 - -#: Choose the color of text under the cursor. If you want it rendered -#: with the background color of the cell underneath instead, use the -#: special keyword: background - -# cursor_shape block - -#: The cursor shape can be one of (block, beam, underline) - -# cursor_beam_thickness 1.5 - -#: Defines the thickness of the beam cursor (in pts) - -# cursor_underline_thickness 2.0 - -#: Defines the thickness of the underline cursor (in pts) - -# cursor_blink_interval -1 - -#: The interval (in seconds) at which to blink the cursor. Set to zero -#: to disable blinking. Negative values mean use system default. Note -#: that numbers smaller than repaint_delay will be limited to -#: repaint_delay. - -# cursor_stop_blinking_after 15.0 - -#: Stop blinking cursor after the specified number of seconds of -#: keyboard inactivity. Set to zero to never stop blinking. - -#: }}} - -#: Scrollback {{{ - -# scrollback_lines 2000 - -#: Number of lines of history to keep in memory for scrolling back. -#: Memory is allocated on demand. Negative numbers are (effectively) -#: infinite scrollback. Note that using very large scrollback is not -#: recommended as it can slow down performance of the terminal and -#: also use large amounts of RAM. Instead, consider using -#: scrollback_pager_history_size. - -# scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER - -#: Program with which to view scrollback in a new window. The -#: scrollback buffer is passed as STDIN to this program. If you change -#: it, make sure the program you use can handle ANSI escape sequences -#: for colors and text formatting. INPUT_LINE_NUMBER in the command -#: line above will be replaced by an integer representing which line -#: should be at the top of the screen. Similarly CURSOR_LINE and -#: CURSOR_COLUMN will be replaced by the current cursor position. - -# scrollback_pager_history_size 0 - -#: Separate scrollback history size, used only for browsing the -#: scrollback buffer (in MB). This separate buffer is not available -#: for interactive scrolling but will be piped to the pager program -#: when viewing scrollback buffer in a separate window. The current -#: implementation stores the data in UTF-8, so approximatively 10000 -#: lines per megabyte at 100 chars per line, for pure ASCII text, -#: unformatted text. A value of zero or less disables this feature. -#: The maximum allowed size is 4GB. - -# wheel_scroll_multiplier 5.0 - -#: Modify the amount scrolled by the mouse wheel. Note this is only -#: used for low precision scrolling devices, not for high precision -#: scrolling on platforms such as macOS and Wayland. Use negative -#: numbers to change scroll direction. - -# touch_scroll_multiplier 1.0 - -#: Modify the amount scrolled by a touchpad. Note this is only used -#: for high precision scrolling devices on platforms such as macOS and -#: Wayland. Use negative numbers to change scroll direction. - -#: }}} - -#: Mouse {{{ - -# mouse_hide_wait 3.0 - -#: Hide mouse cursor after the specified number of seconds of the -#: mouse not being used. Set to zero to disable mouse cursor hiding. -#: Set to a negative value to hide the mouse cursor immediately when -#: typing text. Disabled by default on macOS as getting it to work -#: robustly with the ever-changing sea of bugs that is Cocoa is too -#: much effort. - -# url_color #0087bd -# url_style curly - -#: The color and style for highlighting URLs on mouse-over. url_style -#: can be one of: none, single, double, curly - -# open_url_modifiers kitty_mod - -#: The modifier keys to press when clicking with the mouse on URLs to -#: open the URL - -# open_url_with default - -#: The program with which to open URLs that are clicked on. The -#: special value default means to use the operating system's default -#: URL handler. - -# url_prefixes http https file ftp - -#: The set of URL prefixes to look for when detecting a URL under the -#: mouse cursor. - -# detect_urls yes - -#: Detect URLs under the mouse. Detected URLs are highlighted with an -#: underline and the mouse cursor becomes a hand over them. Even if -#: this option is disabled, URLs are still clickable. - -# copy_on_select no - -#: Copy to clipboard or a private buffer on select. With this set to -#: clipboard, simply selecting text with the mouse will cause the text -#: to be copied to clipboard. Useful on platforms such as macOS that -#: do not have the concept of primary selections. You can instead -#: specify a name such as a1 to copy to a private kitty buffer -#: instead. Map a shortcut with the paste_from_buffer action to paste -#: from this private buffer. For example:: - -#: map cmd+shift+v paste_from_buffer a1 - -#: Note that copying to the clipboard is a security risk, as all -#: programs, including websites open in your browser can read the -#: contents of the system clipboard. - -# strip_trailing_spaces never - -#: Remove spaces at the end of lines when copying to clipboard. A -#: value of smart will do it when using normal selections, but not -#: rectangle selections. always will always do it. - -# rectangle_select_modifiers ctrl+alt - -#: The modifiers to use rectangular selection (i.e. to select text in -#: a rectangular block with the mouse) - -# terminal_select_modifiers shift - -#: The modifiers to override mouse selection even when a terminal -#: application has grabbed the mouse - -# select_by_word_characters @-./_~?&=%+# - -#: Characters considered part of a word when double clicking. In -#: addition to these characters any character that is marked as an -#: alphanumeric character in the unicode database will be matched. - -# click_interval -1.0 - -#: The interval between successive clicks to detect double/triple -#: clicks (in seconds). Negative numbers will use the system default -#: instead, if available, or fallback to 0.5. - -# focus_follows_mouse no - -#: Set the active window to the window under the mouse when moving the -#: mouse around - -# pointer_shape_when_grabbed arrow - -#: The shape of the mouse pointer when the program running in the -#: terminal grabs the mouse. Valid values are: arrow, beam and hand - -# default_pointer_shape beam - -#: The default shape of the mouse pointer. Valid values are: arrow, -#: beam and hand - -# pointer_shape_when_dragging beam - -#: The default shape of the mouse pointer when dragging across text. -#: Valid values are: arrow, beam and hand - -#: }}} - -#: Performance tuning {{{ - -# repaint_delay 10 - -#: Delay (in milliseconds) between screen updates. Decreasing it, -#: increases frames-per-second (FPS) at the cost of more CPU usage. -#: The default value yields ~100 FPS which is more than sufficient for -#: most uses. Note that to actually achieve 100 FPS you have to either -#: set sync_to_monitor to no or use a monitor with a high refresh -#: rate. Also, to minimize latency when there is pending input to be -#: processed, repaint_delay is ignored. - -# input_delay 3 - -#: Delay (in milliseconds) before input from the program running in -#: the terminal is processed. Note that decreasing it will increase -#: responsiveness, but also increase CPU usage and might cause flicker -#: in full screen programs that redraw the entire screen on each loop, -#: because kitty is so fast that partial screen updates will be drawn. - -# sync_to_monitor yes - -#: Sync screen updates to the refresh rate of the monitor. This -#: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing) -#: when scrolling. However, it limits the rendering speed to the -#: refresh rate of your monitor. With a very high speed mouse/high -#: keyboard repeat rate, you may notice some slight input latency. If -#: so, set this to no. - -#: }}} - -#: Terminal bell {{{ - -enable_audio_bell no - -#: Enable/disable the audio bell. Useful in environments that requir -#: silence. - -# visual_bell_duration 0.0 - -#: Visual bell duration. Flash the screen when a bell occurs for the -#: specified number of seconds. Set to zero to disable. - -# window_alert_on_bell yes - -#: Request window attention on bell. Makes the dock icon bounce on -#: macOS or the taskbar flash on linux. - -# bell_on_tab yes - -#: Show a bell symbol on the tab if a bell occurs in one of the -#: windows in the tab and the window is not the currently focused -#: window - -# command_on_bell none - -#: Program to run when a bell occurs. - -#: }}} - -#: Window layout {{{ - -# remember_window_size yes -# initial_window_width 640 -# initial_window_height 400 - -#: If enabled, the window size will be remembered so that new -#: instances of kitty will have the same size as the previous -#: instance. If disabled, the window will initially have size -#: configured by initial_window_width/height, in pixels. You can use a -#: suffix of "c" on the width/height values to have them interpreted -#: as number of cells instead of pixels. - -# enabled_layouts * - -#: The enabled window layouts. A comma separated list of layout names. -#: The special value all means all layouts. The first listed layout -#: will be used as the startup layout. Default configuration is all -#: layouts in alphabetical order. For a list of available layouts, see -#: the https://sw.kovidgoyal.net/kitty/index.html#layouts. - -# window_resize_step_cells 2 -# window_resize_step_lines 2 - -#: The step size (in units of cell width/cell height) to use when -#: resizing windows. The cells value is used for horizontal resizing -#: and the lines value for vertical resizing. - -# window_border_width 0.5pt - -#: The width of window borders. Can be either in pixels (px) or pts -#: (pt). Values in pts will be rounded to the nearest number of pixels -#: based on screen resolution. If not specified the unit is assumed to -#: be pts. Note that borders are displayed only when more than one -#: window is visible. They are meant to separate multiple windows. - -draw_minimal_borders yes - -#: Draw only the minimum borders needed. This means that only the -#: minimum needed borders for inactive windows are drawn. That is only -#: the borders that separate the inactive window from a neighbor. Note -#: that setting a non-zero window margin overrides this and causes all -#: borders to be drawn. - -# window_margin_width 0 - -#: The window margin (in pts) (blank area outside the border). A -#: single value sets all four sides. Two values set the vertical and -#: horizontal sides. Three values set top, horizontal and bottom. Four -#: values set top, right, bottom and left. - -# single_window_margin_width -1 - -#: The window margin (in pts) to use when only a single window is -#: visible. Negative values will cause the value of -#: window_margin_width to be used instead. A single value sets all -#: four sides. Two values set the vertical and horizontal sides. Three -#: values set top, horizontal and bottom. Four values set top, right, -#: bottom and left. - -window_padding_width 10 - -#: The window padding (in pts) (blank area between the text and the -#: window border). A single value sets all four sides. Two values set -#: the vertical and horizontal sides. Three values set top, horizontal -#: and bottom. Four values set top, right, bottom and left. - -# placement_strategy center - -#: When the window size is not an exact multiple of the cell size, the -#: cell area of the terminal window will have some extra padding on -#: the sides. You can control how that padding is distributed with -#: this option. Using a value of center means the cell area will be -#: placed centrally. A value of top-left means the padding will be on -#: only the bottom and right edges. - -# active_border_color #00ff00 - -#: The color for the border of the active window. Set this to none to -#: not draw borders around the active window. - -# inactive_border_color #cccccc - -#: The color for the border of inactive windows - -# bell_border_color #ff5a00 - -#: The color for the border of inactive windows in which a bell has -#: occurred - -# inactive_text_alpha 1.0 - -#: Fade the text in inactive windows by the specified amount (a number -#: between zero and one, with zero being fully faded). - -hide_window_decorations yes - -#: Hide the window decorations (title-bar and window borders) with -#: yes. On macOS, titlebar-only can be used to only hide the titlebar. -#: Whether this works and exactly what effect it has depends on the -#: window manager/operating system. - -# resize_debounce_time 0.1 - -#: The time (in seconds) to wait before redrawing the screen when a -#: resize event is received. On platforms such as macOS, where the -#: operating system sends events corresponding to the start and end of -#: a resize, this number is ignored. - -# resize_draw_strategy static - -#: Choose how kitty draws a window while a resize is in progress. A -#: value of static means draw the current window contents, mostly -#: unchanged. A value of scale means draw the current window contents -#: scaled. A value of blank means draw a blank window. A value of size -#: means show the window size in cells. - -# resize_in_steps no - -#: Resize the OS window in steps as large as the cells, instead of -#: with the usual pixel accuracy. Combined with an -#: initial_window_width and initial_window_height in number of cells, -#: this option can be used to keep the margins as small as possible -#: when resizing the OS window. Note that this does not currently work -#: on Wayland. - -# confirm_os_window_close 0 - -#: Ask for confirmation when closing an OS window or a tab that has at -#: least this number of kitty windows in it. A value of zero disables -#: confirmation. This confirmation also applies to requests to quit -#: the entire application (all OS windows, via the quit action). - -#: }}} - -#: Tab bar {{{ - -# tab_bar_edge bottom - -#: Which edge to show the tab bar on, top or bottom - -# tab_bar_margin_width 0.0 - -#: The margin to the left and right of the tab bar (in pts) - -# tab_bar_style fade - -#: The tab bar style, can be one of: fade, separator, powerline, or -#: hidden. In the fade style, each tab's edges fade into the -#: background color, in the separator style, tabs are separated by a -#: configurable separator, and the powerline shows the tabs as a -#: continuous line. If you use the hidden style, you might want to -#: create a mapping for the select_tab action which presents you with -#: a list of tabs and allows for easy switching to a tab. - -# tab_bar_min_tabs 2 - -#: The minimum number of tabs that must exist before the tab bar is -#: shown - -# tab_switch_strategy previous - -#: The algorithm to use when switching to a tab when the current tab -#: is closed. The default of previous will switch to the last used -#: tab. A value of left will switch to the tab to the left of the -#: closed tab. A value of right will switch to the tab to the right of -#: the closed tab. A value of last will switch to the right-most tab. - -# tab_fade 0.25 0.5 0.75 1 - -#: Control how each tab fades into the background when using fade for -#: the tab_bar_style. Each number is an alpha (between zero and one) -#: that controls how much the corresponding cell fades into the -#: background, with zero being no fade and one being full fade. You -#: can change the number of cells used by adding/removing entries to -#: this list. - -# tab_separator " ┇" - -#: The separator between tabs in the tab bar when using separator as -#: the tab_bar_style. - -# tab_activity_symbol none - -#: Some text or a unicode symbol to show on the tab if a window in the -#: tab that does not have focus has some activity. - -# tab_title_template "{title}" - -#: A template to render the tab title. The default just renders the -#: title. If you wish to include the tab-index as well, use something -#: like: {index}: {title}. Useful if you have shortcuts mapped for -#: goto_tab N. In addition you can use {layout_name} for the current -#: layout name and {num_windows} for the number of windows in the tab. -#: Note that formatting is done by Python's string formatting -#: machinery, so you can use, for instance, {layout_name[:2].upper()} -#: to show only the first two letters of the layout name, upper-cased. -#: If you want to style the text, you can use styling directives, for -#: example: {fmt.fg.red}red{fmt.fg.default}normal{fmt.bg._00FF00}green -#: bg{fmt.bg.normal}. Similarly, for bold and italic: -#: {fmt.bold}bold{fmt.nobold}normal{fmt.italic}italic{fmt.noitalic}. - -# active_tab_title_template none - -#: Template to use for active tabs, if not specified falls back to -#: tab_title_template. - -# active_tab_foreground #000 -# active_tab_background #eee -# active_tab_font_style bold-italic -# inactive_tab_foreground #444 -# inactive_tab_background #999 -# inactive_tab_font_style normal - -#: Tab bar colors and styles - -# tab_bar_background none - -#: Background color for the tab bar. Defaults to using the terminal -#: background color. - -#: }}} - -#: Color scheme {{{ -# -# foreground #dddddd -# background #000000 - -#: The foreground and background colors - -# background_opacity 1.0 - -#: The opacity of the background. A number between 0 and 1, where 1 is -#: opaque and 0 is fully transparent. This will only work if -#: supported by the OS (for instance, when using a compositor under -#: X11). Note that it only sets the background color's opacity in -#: cells that have the same background color as the default terminal -#: background. This is so that things like the status bar in vim, -#: powerline prompts, etc. still look good. But it means that if you -#: use a color theme with a background color in your editor, it will -#: not be rendered as transparent. Instead you should change the -#: default background color in your kitty config and not use a -#: background color in the editor color scheme. Or use the escape -#: codes to set the terminals default colors in a shell script to -#: launch your editor. Be aware that using a value less than 1.0 is a -#: (possibly significant) performance hit. If you want to dynamically -#: change transparency of windows set dynamic_background_opacity to -#: yes (this is off by default as it has a performance cost) - -# background_image none - -#: Path to a background image. Must be in PNG format. - -# background_image_layout tiled - -#: Whether to tile or scale the background image. - -# background_image_linear no - -#: When background image is scaled, whether linear interpolation -#: should be used. - -# dynamic_background_opacity no - -#: Allow changing of the background_opacity dynamically, using either -#: keyboard shortcuts (increase_background_opacity and -#: decrease_background_opacity) or the remote control facility. - -# background_tint 0.0 - -#: How much to tint the background image by the background color. The -#: tint is applied only under the text area, not margin/borders. Makes -#: it easier to read the text. Tinting is done using the current -#: background color for each window. This setting applies only if -#: background_opacity is set and transparent windows are supported or -#: background_image is set. - -# dim_opacity 0.75 - -#: How much to dim text that has the DIM/FAINT attribute set. One -#: means no dimming and zero means fully dimmed (i.e. invisible). - -# selection_foreground #000000 - -#: The foreground for text selected with the mouse. A value of none -#: means to leave the color unchanged. - -# selection_background #fffacd - -#: The background for text selected with the mouse. - - -#: The 16 terminal colors. There are 8 basic colors, each color has a -#: dull and bright version. You can also set the remaining colors from -#: the 256 color table as color16 to color255. - -# color0 #000000 -# color8 #767676 - -#: black - -# color1 #cc0403 -# color9 #f2201f - -#: red - -# color2 #19cb00 -# color10 #23fd00 - -#: green - -# color3 #cecb00 -# color11 #fffd00 - -#: yellow - -# color4 #0d73cc -# color12 #1a8fff - -#: blue - -# color5 #cb1ed1 -# color13 #fd28ff - -#: magenta - -# color6 #0dcdcd -# color14 #14ffff - -#: cyan - -# color7 #dddddd -# color15 #ffffff - -#: white - -# mark1_foreground black - -#: Color for marks of type 1 - -# mark1_background #98d3cb - -#: Color for marks of type 1 (light steel blue) - -# mark2_foreground black - -#: Color for marks of type 2 - -# mark2_background #f2dcd3 - -#: Color for marks of type 1 (beige) - -# mark3_foreground black - -#: Color for marks of type 3 - -# mark3_background #f274bc - -#: Color for marks of type 1 (violet) - -#: }}} - -#: Advanced {{{ - -# shell . - -#: The shell program to execute. The default value of . means to use -#: whatever shell is set as the default shell for the current user. -#: Note that on macOS if you change this, you might need to add -#: --login to ensure that the shell starts in interactive mode and -#: reads its startup rc files. - -# editor . - -#: The console editor to use when editing the kitty config file or -#: similar tasks. A value of . means to use the environment variables -#: VISUAL and EDITOR in that order. Note that this environment -#: variable has to be set not just in your shell startup scripts but -#: system-wide, otherwise kitty will not see it. - -# close_on_child_death no - -#: Close the window when the child process (shell) exits. If no (the -#: default), the terminal will remain open when the child exits as -#: long as there are still processes outputting to the terminal (for -#: example disowned or backgrounded processes). If yes, the window -#: will close as soon as the child process exits. Note that setting it -#: to yes means that any background processes still using the terminal -#: can fail silently because their stdout/stderr/stdin no longer work. - -allow_remote_control yes - -#: Allow other programs to control kitty. If you turn this on other -#: programs can control all aspects of kitty, including sending text -#: to kitty windows, opening new windows, closing windows, reading the -#: content of windows, etc. Note that this even works over ssh -#: connections. You can chose to either allow any program running -#: within kitty to control it, with yes or only programs that connect -#: to the socket specified with the kitty --listen-on command line -#: option, if you use the value socket-only. The latter is useful if -#: you want to prevent programs running on a remote computer over ssh -#: from controlling kitty. - -listen_on unix:/tmp/kitty-socket - -#: Tell kitty to listen to the specified unix/tcp socket for remote -#: control connections. Note that this will apply to all kitty -#: instances. It can be overridden by the kitty --listen-on command -#: line flag. This option accepts only UNIX sockets, such as -#: unix:${TEMP}/mykitty or (on Linux) unix:@mykitty. Environment -#: variables are expanded. If {kitty_pid} is present then it is -#: replaced by the PID of the kitty process, otherwise the PID of the -#: kitty process is appended to the value, with a hyphen. This option -#: is ignored unless you also set allow_remote_control to enable -#: remote control. See the help for kitty --listen-on for more -#: details. - -# env - -#: Specify environment variables to set in all child processes. Note -#: that environment variables are expanded recursively, so if you -#: use:: - -#: env MYVAR1=a -#: env MYVAR2=${MYVAR1}/${HOME}/b - -#: The value of MYVAR2 will be a//b. - -# update_check_interval 24 - -#: Periodically check if an update to kitty is available. If an update -#: is found a system notification is displayed informing you of the -#: available update. The default is to check every 24 hrs, set to zero -#: to disable. - -# startup_session none - -#: Path to a session file to use for all kitty instances. Can be -#: overridden by using the kitty --session command line option for -#: individual instances. See -#: https://sw.kovidgoyal.net/kitty/index.html#sessions in the kitty -#: documentation for details. Note that relative paths are interpreted -#: with respect to the kitty config directory. Environment variables -#: in the path are expanded. - -# clipboard_control write-clipboard write-primary - -#: Allow programs running in kitty to read and write from the -#: clipboard. You can control exactly which actions are allowed. The -#: set of possible actions is: write-clipboard read-clipboard write- -#: primary read-primary. You can additionally specify no-append to -#: disable kitty's protocol extension for clipboard concatenation. The -#: default is to allow writing to the clipboard and primary selection -#: with concatenation enabled. Note that enabling the read -#: functionality is a security risk as it means that any program, even -#: one running on a remote server via SSH can read your clipboard. - -# allow_hyperlinks yes - -#: Process hyperlink (OSC 8) escape sequences. If disabled OSC 8 -#: escape sequences are ignored. Otherwise they become clickable -#: links, that you can click by holding down ctrl+shift and clicking -#: with the mouse. The special value of ``ask`` means that kitty will -#: ask before opening the link. - -# term xterm-kitty - -#: The value of the TERM environment variable to set. Changing this -#: can break many terminal programs, only change it if you know what -#: you are doing, not because you read some advice on Stack Overflow -#: to change it. The TERM variable is used by various programs to get -#: information about the capabilities and behavior of the terminal. If -#: you change it, depending on what programs you run, and how -#: different the terminal you are changing it to is, various things -#: from key-presses, to colors, to various advanced features may not -#: work. - -#: }}} - -#: OS specific tweaks {{{ - -# macos_titlebar_color system - -#: Change the color of the kitty window's titlebar on macOS. A value -#: of system means to use the default system color, a value of -#: background means to use the background color of the currently -#: active window and finally you can use an arbitrary color, such as -#: #12af59 or red. WARNING: This option works by using a hack, as -#: there is no proper Cocoa API for it. It sets the background color -#: of the entire window and makes the titlebar transparent. As such it -#: is incompatible with background_opacity. If you want to use both, -#: you are probably better off just hiding the titlebar with -#: hide_window_decorations. - -# macos_option_as_alt no - -#: Use the option key as an alt key. With this set to no, kitty will -#: use the macOS native Option+Key = unicode character behavior. This -#: will break any Alt+key keyboard shortcuts in your terminal -#: programs, but you can use the macOS unicode input technique. You -#: can use the values: left, right, or both to use only the left, -#: right or both Option keys as Alt, instead. - -# macos_hide_from_tasks no - -#: Hide the kitty window from running tasks (Option+Tab) on macOS. - -# macos_quit_when_last_window_closed no - -#: Have kitty quit when all the top-level windows are closed. By -#: default, kitty will stay running, even with no open windows, as is -#: the expected behavior on macOS. - -# macos_window_resizable yes - -#: Disable this if you want kitty top-level (OS) windows to not be -#: resizable on macOS. - -# macos_thicken_font 0 - -#: Draw an extra border around the font with the given width, to -#: increase legibility at small font sizes. For example, a value of -#: 0.75 will result in rendering that looks similar to sub-pixel -#: antialiasing at common font sizes. - -# macos_traditional_fullscreen no - -#: Use the traditional full-screen transition, that is faster, but -#: less pretty. - -# macos_show_window_title_in all - -#: Show or hide the window title in the macOS window or menu-bar. A -#: value of window will show the title of the currently active window -#: at the top of the macOS window. A value of menubar will show the -#: title of the currently active window in the macOS menu-bar, making -#: use of otherwise wasted space. all will show the title everywhere -#: and none hides the title in the window and the menu-bar. - -# macos_custom_beam_cursor no - -#: Enable/disable custom mouse cursor for macOS that is easier to see -#: on both light and dark backgrounds. WARNING: this might make your -#: mouse cursor invisible on dual GPU machines. - -# linux_display_server auto - -#: Choose between Wayland and X11 backends. By default, an appropriate -#: backend based on the system state is chosen automatically. Set it -#: to x11 or wayland to force the choice. - -#: }}} - -#: Keyboard shortcuts {{{ - -#: For a list of key names, see: the GLFW key macros -#: . -#: The name to use is the part after the GLFW_KEY_ prefix. For a list -#: of modifier names, see: GLFW mods -#: - -#: On Linux you can also use XKB key names to bind keys that are not -#: supported by GLFW. See XKB keys -#: for a list of key names. The name to use is the part -#: after the XKB_KEY_ prefix. Note that you can only use an XKB key -#: name for keys that are not known as GLFW keys. - -#: Finally, you can use raw system key codes to map keys, again only -#: for keys that are not known as GLFW keys. To see the system key -#: code for a key, start kitty with the kitty --debug-keyboard option. -#: Then kitty will output some debug text for every key event. In that -#: text look for ``native_code`` the value of that becomes the key -#: name in the shortcut. For example: - -#: .. code-block:: none - -#: on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a' - -#: Here, the key name for the A key is 0x61 and you can use it with:: - -#: map ctrl+0x61 something - -#: to map ctrl+a to something. - -#: You can use the special action no_op to unmap a keyboard shortcut -#: that is assigned in the default configuration:: - -#: map kitty_mod+space no_op - -#: You can combine multiple actions to be triggered by a single -#: shortcut, using the syntax below:: - -#: map key combine action1 action2 action3 ... - -#: For example:: - -#: map kitty_mod+e combine : new_window : next_layout - -#: this will create a new window and switch to the next available -#: layout - -#: You can use multi-key shortcuts using the syntax shown below:: - -#: map key1>key2>key3 action - -#: For example:: - -#: map ctrl+f>2 set_font_size 20 - -kitty_mod ctrl+shift - -#: The value of kitty_mod is used as the modifier for all default -#: shortcuts, you can change it in your kitty.conf to change the -#: modifiers for all the default shortcuts. - -# clear_all_shortcuts no - -#: You can have kitty remove all shortcut definition seen up to this -#: point. Useful, for instance, to remove the default shortcuts. - -# kitten_alias hints hints --hints-offset=0 - -#: You can create aliases for kitten names, this allows overriding the -#: defaults for kitten options and can also be used to shorten -#: repeated mappings of the same kitten with a specific group of -#: options. For example, the above alias changes the default value of -#: kitty +kitten hints --hints-offset to zero for all mappings, -#: including the builtin ones. - -#: Clipboard {{{ - -# map kitty_mod+c copy_to_clipboard - -#: There is also a copy_or_interrupt action that can be optionally -#: mapped to Ctrl+c. It will copy only if there is a selection and -#: send an interrupt otherwise. Similarly, copy_and_clear_or_interrupt -#: will copy and clear the selection or send an interrupt if there is -#: no selection. - -# map kitty_mod+v paste_from_clipboard -# map kitty_mod+s paste_from_selection -# map shift+insert paste_from_selection -# map kitty_mod+o pass_selection_to_program - -#: You can also pass the contents of the current selection to any -#: program using pass_selection_to_program. By default, the system's -#: open program is used, but you can specify your own, the selection -#: will be passed as a command line argument to the program, for -#: example:: - -#: map kitty_mod+o pass_selection_to_program firefox - -#: You can pass the current selection to a terminal program running in -#: a new kitty window, by using the @selection placeholder:: - -#: map kitty_mod+y new_window less @selection - -#: }}} - -#: Scrolling {{{ - -# map kitty_mod+up scroll_line_up -# map kitty_mod+k scroll_line_up -# map kitty_mod+down scroll_line_down -# map kitty_mod+j scroll_line_down -# map kitty_mod+page_up scroll_page_up -# map kitty_mod+page_down scroll_page_down -# map kitty_mod+home scroll_home -# map kitty_mod+end scroll_end -# map kitty_mod+h show_scrollback - -#: You can pipe the contents of the current screen + history buffer as -#: STDIN to an arbitrary program using the ``launch`` function. For -#: example, the following opens the scrollback buffer in less in an -#: overlay window:: - -#: map f1 launch --stdin-source=@screen_scrollback --stdin-add-formatting --type=overlay less +G -R - -#: For more details on piping screen and buffer contents to external -#: programs, see launch. - -#: }}} - -#: Window management {{{ - -# map kitty_mod+enter new_window - -#: You can open a new window running an arbitrary program, for -#: example:: - -#: map kitty_mod+y launch mutt - -#: You can open a new window with the current working directory set to -#: the working directory of the current window using:: - -#: map ctrl+alt+enter launch --cwd=current - -#: You can open a new window that is allowed to control kitty via the -#: kitty remote control facility by prefixing the command line with @. -#: Any programs running in that window will be allowed to control -#: kitty. For example:: - -#: map ctrl+enter launch --allow-remote-control some_program - -#: You can open a new window next to the currently active window or as -#: the first window, with:: - -#: map ctrl+n launch --location=neighbor some_program -#: map ctrl+f launch --location=first some_program - -#: For more details, see launch. - -# map kitty_mod+n new_os_window - -#: Works like new_window above, except that it opens a top level OS -#: kitty window. In particular you can use new_os_window_with_cwd to -#: open a window with the current working directory. - -# map kitty_mod+w close_window -# map kitty_mod+] next_window -# map kitty_mod+[ previous_window -# map kitty_mod+f move_window_forward -# map kitty_mod+b move_window_backward -# map kitty_mod+` move_window_to_top -# map kitty_mod+r start_resizing_window -# map kitty_mod+1 first_window -# map kitty_mod+2 second_window -# map kitty_mod+3 third_window -# map kitty_mod+4 fourth_window -# map kitty_mod+5 fifth_window -# map kitty_mod+6 sixth_window -# map kitty_mod+7 seventh_window -# map kitty_mod+8 eighth_window -# map kitty_mod+9 ninth_window -# map kitty_mod+0 tenth_window -#: }}} - -#: Tab management {{{ - -# map kitty_mod+right next_tab -# map kitty_mod+left previous_tab -# map kitty_mod+t new_tab -# map kitty_mod+q close_tab -# map kitty_mod+. move_tab_forward -# map kitty_mod+, move_tab_backward -# map kitty_mod+alt+t set_tab_title - -#: You can also create shortcuts to go to specific tabs, with 1 being -#: the first tab, 2 the second tab and -1 being the previously active -#: tab, and any number larger than the last tab being the last tab:: - -#: map ctrl+alt+1 goto_tab 1 -#: map ctrl+alt+2 goto_tab 2 - -#: Just as with new_window above, you can also pass the name of -#: arbitrary commands to run when using new_tab and use -#: new_tab_with_cwd. Finally, if you want the new tab to open next to -#: the current tab rather than at the end of the tabs list, use:: - -#: map ctrl+t new_tab !neighbor [optional cmd to run] -#: }}} - -#: Layout management {{{ - -# map kitty_mod+l next_layout - -#: You can also create shortcuts to switch to specific layouts:: - -#: map ctrl+alt+t goto_layout tall -#: map ctrl+alt+s goto_layout stack - -#: Similarly, to switch back to the previous layout:: - -#: map ctrl+alt+p last_used_layout -#: }}} - -#: Font sizes {{{ - -#: You can change the font size for all top-level kitty OS windows at -#: a time or only the current one. - -map kitty_mod+plus change_font_size all +2.0 -map kitty_mod+minus change_font_size all -2.0 -# map kitty_mod+backspace change_font_size all 0 - -#: To setup shortcuts for specific font sizes:: - -#: map kitty_mod+f6 change_font_size all 10.0 - -#: To setup shortcuts to change only the current OS window's font -#: size:: - -#: map kitty_mod+f6 change_font_size current 10.0 -#: }}} - -#: Select and act on visible text {{{ - -#: Use the hints kitten to select text and either pass it to an -#: external program or insert it into the terminal or copy it to the -#: clipboard. - -# map kitty_mod+e kitten hints - -#: Open a currently visible URL using the keyboard. The program used -#: to open the URL is specified in open_url_with. - -# map kitty_mod+p>f kitten hints --type path --program - - -#: Select a path/filename and insert it into the terminal. Useful, for -#: instance to run git commands on a filename output from a previous -#: git command. - -# map kitty_mod+p>shift+f kitten hints --type path - -#: Select a path/filename and open it with the default open program. - -# map kitty_mod+p>l kitten hints --type line --program - - -#: Select a line of text and insert it into the terminal. Use for the -#: output of things like: ls -1 - -# map kitty_mod+p>w kitten hints --type word --program - - -#: Select words and insert into terminal. - -# map kitty_mod+p>h kitten hints --type hash --program - - -#: Select something that looks like a hash and insert it into the -#: terminal. Useful with git, which uses sha1 hashes to identify -#: commits - -# map kitty_mod+p>n kitten hints --type linenum - -#: Select something that looks like filename:linenum and open it in -#: vim at the specified line number. - -# map kitty_mod+p>y kitten hints --type hyperlink - -#: Select a hyperlink (i.e. a URL that has been marked as such by the -#: terminal program, for example, by ls --hyperlink=auto). - - -#: The hints kitten has many more modes of operation that you can map -#: to different shortcuts. For a full description see kittens/hints. -#: }}} - -#: Miscellaneous {{{ - -# map kitty_mod+f11 toggle_fullscreen -# map kitty_mod+f10 toggle_maximized -# map kitty_mod+u kitten unicode_input -# map kitty_mod+f2 edit_config_file -# map kitty_mod+escape kitty_shell window - -#: Open the kitty shell in a new window/tab/overlay/os_window to -#: control kitty using commands. - -# map kitty_mod+a>m set_background_opacity +0.1 -# map kitty_mod+a>l set_background_opacity -0.1 -# map kitty_mod+a>1 set_background_opacity 1 -# map kitty_mod+a>d set_background_opacity default -# map kitty_mod+delete clear_terminal reset active - -#: You can create shortcuts to clear/reset the terminal. For example:: - -#: # Reset the terminal -#: map kitty_mod+f9 clear_terminal reset active -#: # Clear the terminal screen by erasing all contents -#: map kitty_mod+f10 clear_terminal clear active -#: # Clear the terminal scrollback by erasing it -#: map kitty_mod+f11 clear_terminal scrollback active -#: # Scroll the contents of the screen into the scrollback -#: map kitty_mod+f12 clear_terminal scroll active - -#: If you want to operate on all windows instead of just the current -#: one, use all instead of active. - -#: It is also possible to remap Ctrl+L to both scroll the current -#: screen contents into the scrollback buffer and clear the screen, -#: instead of just clearing the screen:: - -#: map ctrl+l combine : clear_terminal scroll active : send_text normal,application \x0c - - -#: You can tell kitty to send arbitrary (UTF-8) encoded text to the -#: client program when pressing specified shortcut keys. For example:: - -#: map ctrl+alt+a send_text all Special text - -#: This will send "Special text" when you press the ctrl+alt+a key -#: combination. The text to be sent is a python string literal so you -#: can use escapes like \x1b to send control codes or \u21fb to send -#: unicode characters (or you can just input the unicode characters -#: directly as UTF-8 text). The first argument to send_text is the -#: keyboard modes in which to activate the shortcut. The possible -#: values are normal or application or kitty or a comma separated -#: combination of them. The special keyword all means all modes. The -#: modes normal and application refer to the DECCKM cursor key mode -#: for terminals, and kitty refers to the special kitty extended -#: keyboard protocol. - -#: Another example, that outputs a word and then moves the cursor to -#: the start of the line (same as pressing the Home key):: - -#: map ctrl+alt+a send_text normal Word\x1b[H -#: map ctrl+alt+a send_text application Word\x1bOH - -#: }}} - -# }}} - - -# BEGIN_KITTY_THEME -# Atom One Light -include current-theme.conf -# END_KITTY_THEME diff --git a/configs/kitty/themes/Argonaut.conf b/configs/kitty/themes/Argonaut.conf deleted file mode 100644 index 29f8f9e..0000000 --- a/configs/kitty/themes/Argonaut.conf +++ /dev/null @@ -1,21 +0,0 @@ -background #000000 -foreground #fffaf3 -cursor #ffffff -selection_background #002a3a -color0 #222222 -color8 #444444 -color1 #ff000f -color9 #ff273f -color2 #8ce00a -color10 #abe05a -color3 #ffb900 -color11 #ffd141 -color4 #008df8 -color12 #0092ff -color5 #6c43a5 -color13 #9a5feb -color6 #00d7eb -color14 #67ffef -color7 #ffffff -color15 #ffffff -selection_foreground #0d0f18 diff --git a/configs/kitty/themes/Atom One Light.conf b/configs/kitty/themes/Atom One Light.conf deleted file mode 100644 index 056ef3b..0000000 --- a/configs/kitty/themes/Atom One Light.conf +++ /dev/null @@ -1,21 +0,0 @@ -background #f8f8f8 -foreground #2a2b33 -cursor #bbbbbb -selection_background #ececec -color0 #000000 -color8 #000000 -color1 #de3d35 -color9 #de3d35 -color2 #3e953a -color10 #3e953a -color3 #d2b67b -color11 #d2b67b -color4 #2f5af3 -color12 #2f5af3 -color5 #950095 -color13 #a00095 -color6 #3e953a -color14 #3e953a -color7 #bbbbbb -color15 #ffffff -selection_foreground #f8f8f8 diff --git a/configs/nvim/lazy-lock.json b/configs/nvim/lazy-lock.json deleted file mode 100644 index b723810..0000000 --- a/configs/nvim/lazy-lock.json +++ /dev/null @@ -1,71 +0,0 @@ -{ - "FixCursorHold.nvim": { "branch": "master", "commit": "1900f89dc17c603eec29960f57c00bd9ae696495" }, - "LuaSnip": { "branch": "master", "commit": "c4d6298347f7707e9757351b2ee03d0c00da5c20" }, - "alpha-nvim": { "branch": "main", "commit": "7a6b9487dba044a43fde534bf5036f0fda5b6b23" }, - "arduino-helper.nvim": { "branch": "master", "commit": "5ec57de680a94f8e948e2e0c6328939b9b63a598" }, - "autolist.nvim": { "branch": "main", "commit": "5f70a5f99e96c8fe3069de042abd2a8ed2deb855" }, - "barbar.nvim": { "branch": "master", "commit": "8cca17ea0ced3ba564e5da972a25600edafe7d7b" }, - "boole.nvim": { "branch": "main", "commit": "7b4a3dae28e3b2497747aa840439e9493cabdc49" }, - "catppuccin": { "branch": "main", "commit": "490078b1593c6609e6a50ad5001e7902ea601824" }, - "cmp-buffer": { "branch": "main", "commit": "3022dbc9166796b644a841a02de8dd1cc1d311fa" }, - "cmp-emoji": { "branch": "main", "commit": "19075c36d5820253d32e2478b6aaf3734aeaafa0" }, - "cmp-nvim-lsp": { "branch": "main", "commit": "44b16d11215dce86f253ce0c30949813c0a90765" }, - "cmp-nvim-lua": { "branch": "main", "commit": "f12408bdb54c39c23e67cab726264c10db33ada8" }, - "cmp-path": { "branch": "main", "commit": "91ff86cd9c29299a64f968ebb45846c485725f23" }, - "cmp_luasnip": { "branch": "master", "commit": "18095520391186d634a0045dacaa346291096566" }, - "copilot-cmp": { "branch": "master", "commit": "d631b3afbf26bb17d6cf2b3cd8f3d79e7d5eeca1" }, - "copilot.lua": { "branch": "master", "commit": "b3798d85322b1aaa56cad9d651d2d1aaec6298e9" }, - "flit.nvim": { "branch": "main", "commit": "498b3a4864e697f1ed1145e518c4c78c776c55d8" }, - "friendly-snippets": { "branch": "main", "commit": "377d45475b49e37460a902d6d569d2093d4037d0" }, - "git-conflict.nvim": { "branch": "main", "commit": "8d962d83cae924a314965f738ed1e05a4000d682" }, - "gitsigns.nvim": { "branch": "main", "commit": "749267aaa863c30d721c9913699c5d94e0c07dd3" }, - "lazy.nvim": { "branch": "main", "commit": "dac844ed617dda4f9ec85eb88e9629ad2add5e05" }, - "leap.nvim": { "branch": "main", "commit": "5efe985cf68fac3b6a6dfe7a75fbfaca8db2af9c" }, - "lsp-format.nvim": { "branch": "master", "commit": "ca0df5c8544e51517209ea7b86ecc522c98d4f0a" }, - "lspkind.nvim": { "branch": "master", "commit": "57610d5ab560c073c465d6faf0c19f200cb67e6e" }, - "lspsaga.nvim": { "branch": "main", "commit": "93a2ae4c03d1f1c138f5a38f1cbc3808479b434e" }, - "lualine-lsp-progress": { "branch": "master", "commit": "56842d097245a08d77912edf5f2a69ba29f275d7" }, - "lualine.nvim": { "branch": "master", "commit": "45e27ca739c7be6c49e5496d14fcf45a303c3a63" }, - "mason-lspconfig.nvim": { "branch": "main", "commit": "7e8208a4d936f93303cc229af865a2cd226c807f" }, - "mason.nvim": { "branch": "main", "commit": "a51c2d063c5377ee9e58c5f9cda7c7436787be72" }, - "mini.nvim": { "branch": "main", "commit": "ab94192dd36b35c6752aac7154c7130922c27af7" }, - "neo-tree.nvim": { "branch": "main", "commit": "cac2e1bfa1ecd5bd0ce7ae29e12efb3ba5a7347d" }, - "neoai.nvim": { "branch": "main", "commit": "248c2001d0b24e58049eeb6884a79860923cfe13" }, - "neotest": { "branch": "master", "commit": "bec7be0f13ee19c85561943fc5f7b8daa4f4d465" }, - "neotest-jest": { "branch": "main", "commit": "66de78407b3650bf390c195a997b85d3be8cde06" }, - "neotest-vitest": { "branch": "main", "commit": "d6577b191e16c174bffbec1eadfcd65c22fdcc0d" }, - "noice.nvim": { "branch": "main", "commit": "894db25ec726d32047799d4d0a982b701bec453b" }, - "nui.nvim": { "branch": "main", "commit": "9e3916e784660f55f47daa6f26053ad044db5d6a" }, - "null-ls.nvim": { "branch": "main", "commit": "0010ea927ab7c09ef0ce9bf28c2b573fc302f5a7" }, - "nvim-cmp": { "branch": "main", "commit": "51f1e11a89ec701221877532ee1a23557d291dd5" }, - "nvim-colorizer.lua": { "branch": "master", "commit": "36c610a9717cc9ec426a07c8e6bf3b3abcb139d6" }, - "nvim-dap": { "branch": "master", "commit": "1c63f37f95cd4fb54512898168138d9a75d1516a" }, - "nvim-dap-ui": { "branch": "master", "commit": "85b16ac2309d85c88577cd8ee1733ce52be8227e" }, - "nvim-lspconfig": { "branch": "master", "commit": "67f151e84daddc86cc65f5d935e592f76b9f4496" }, - "nvim-notify": { "branch": "master", "commit": "ea9c8ce7a37f2238f934e087c255758659948e0f" }, - "nvim-recorder": { "branch": "main", "commit": "a33c6d4715bc4740906330adc81a8cbedc7a202f" }, - "nvim-scrollbar": { "branch": "main", "commit": "35f99d559041c7c0eff3a41f9093581ceea534e8" }, - "nvim-toggleterm.lua": { "branch": "main", "commit": "12cba0a1967b4f3f31903484dec72a6100dcf515" }, - "nvim-treesitter": { "branch": "master", "commit": "8fa7ce35afe88b8294e6ced757aa14ec98414568" }, - "nvim-treesitter-textobjects": { "branch": "master", "commit": "56272167a6dead91c47c02dbdbfe1ae5643c59f5" }, - "nvim-ts-autotag": { "branch": "main", "commit": "6be1192965df35f94b8ea6d323354f7dc7a557e4" }, - "nvim-ts-context-commentstring": { "branch": "main", "commit": "9bff161dfece6ecf3459e6e46ca42e49f9ed939f" }, - "nvim-web-devicons": { "branch": "master", "commit": "cfc8824cc1db316a276b36517f093baccb8e799a" }, - "oil.nvim": { "branch": "master", "commit": "8f7807946a67b5f1a515946f82251e33651bae29" }, - "persisted.nvim": { "branch": "main", "commit": "315cd1a8a501ca8e0c1d55f0c245b9cc0e1ffa01" }, - "plenary.nvim": { "branch": "master", "commit": "267282a9ce242bbb0c5dc31445b6d353bed978bb" }, - "popup.nvim": { "branch": "master", "commit": "b7404d35d5d3548a82149238289fa71f7f6de4ac" }, - "rest.nvim": { "branch": "main", "commit": "22673c848768ff25517154a5aebfebc0c77d0b4f" }, - "sniprun": { "branch": "master", "commit": "1c4bc063522946676dd178d01d6fc130d3e41da5" }, - "statuscol.nvim": { "branch": "main", "commit": "9f1ff2dcf614544c5022e876d83b4894c1944e87" }, - "telescope-fzf-native.nvim": { "branch": "main", "commit": "9bc8237565ded606e6c366a71c64c0af25cd7a50" }, - "telescope.nvim": { "branch": "master", "commit": "2d92125620417fbea82ec30303823e3cd69e90e8" }, - "todo-comments.nvim": { "branch": "main", "commit": "3094ead8edfa9040de2421deddec55d3762f64d1" }, - "translate.nvim": { "branch": "main", "commit": "63592d00a29a967c2011a67cc31268d1dec75af9" }, - "trouble.nvim": { "branch": "main", "commit": "40aad004f53ae1d1ba91bcc5c29d59f07c5f01d3" }, - "undotree": { "branch": "master", "commit": "0e11ba7325efbbb3f3bebe06213afa3e7ec75131" }, - "vim-dadbod": { "branch": "master", "commit": "7d80bbd11c407a09e0f7b869c38f3dec3902805f" }, - "vim-dadbod-completion": { "branch": "master", "commit": "fc7321a17f4c55db11fae89a884ddf4724020bae" }, - "vim-dadbod-ui": { "branch": "master", "commit": "200aebf70e6fc4b0eb1d3ecf0d57028e198d8dc6" }, - "which-key.nvim": { "branch": "main", "commit": "7ccf476ebe0445a741b64e36c78a682c1c6118b7" } -} \ No newline at end of file diff --git a/install.sh b/install.sh index de3dae5..284137c 100755 --- a/install.sh +++ b/install.sh @@ -8,7 +8,10 @@ fi # - Cloning Repo - echo "-- Cloning repo --" -git clone https://github.com/jim-fx/.dotfiles.git ~/.dotfiles +cd $HOME +git init +git remote add origin https://github.com/jim-fx/.dotfiles.git +git checkout -f main # - Executing the script - echo "-- starting script --"